Rtl P5s Coverage Policy

Coverage Analysis Policy

Coverage Targets

Raw coverage is always reported alongside post-exclusion numbers for transparency.

Coverpoint Iterative Refinement (minimum 3 rounds)

Coverage coverpoint extraction and test generation must iterate at least 3 times:

• Round 1 (Initial Analysis): Identify all uncovered lines, branches, FSM states/transitions. Prioritize gaps (HIGH/MED/LOW). Generate first batch of directed tests for HIGH gaps.
• Round 2 (Deepen): Re-analyze coverage after Round 1 tests. Identify newly reachable but still uncovered paths. Add cross-coverage points (e.g., cmd × size, state × error). Target MED gaps. Check for unreachable code (waiver candidates).
• Round 3 (Close): Final coverage push. Add corner-case stimulus for remaining gaps. Verify coverage targets met (line ≥ 90%, toggle ≥ 80%, FSM ≥ 70%). Document waived bins with justification.
• Additional rounds: Continue until coverage targets are met or all remaining gaps are justified as waived.

Each round produces a progress note at .rat/scratch/phase-5/coverage-iteration-r{N}.md.

Escalation & Stop Conditions

• LOW priority gaps flagged as unreachable → report to user, recommend dead code removal
• Coverage tool format unrecognized → halt, ask user for coverage format (Icarus, VCS, etc.)
• Coverage below 70% after gap fill → escalate to rtl-architect for structural review

Final Checklist

• sim/coverage/coverage_gaps.md written with all gaps prioritized
• New tests written for all HIGH priority gaps
• Coverage improvement measured and reported
• Unreachable code gaps flagged separately

CDTG Feedback Protocol (Coverage → Testbench-Dev)

When coverage-analyst identifies HIGH/CRITICAL gaps, it must produce a Directed Test Guidance table that testbench-dev can directly consume. This closes the Coverage-Driven Test Generation loop with structured, actionable feedback — not just gap descriptions.

Feedback Format (coverage-analyst → testbench-dev)

The canonical table format (columns: Gap ID | Uncovered Bin | Constraint | Sequence | Expected Behavior) is OWNED by the coverage-analyst agent prompt ("Directed Test Guidance" output format) — the producer. Field semantics:

• Constraint: Signal value ranges or conditions that must hold to reach the uncovered bin
• Sequence: Temporal ordering of stimulus (clock-cycle-level when possible)
• Expected Behavior: Observable DUT response that confirms the bin was hit
• ac_id linkage: not a table column — gaps map to acceptance criteria in the gap report text (e.g., "Gap G01 ... relates to REQ-U-012.AC-3", per coverage-analyst's ac_id protocol); when no structured AC exists, reference the REQ ID instead

Testbench-Dev Consumption

testbench-dev reads the Directed Test Guidance table and generates one cocotb test function per row. Each test:

1. Applies the Constraint as signal assignments
2. Follows the Sequence as a cycle-accurate stimulus plan
3. Asserts the Expected Behavior as a pass/fail check

Convergence Loop

Round N: coverage-analyst → Directed Test Guidance table
         test-plan-writer  → systematic test plan (ECP/BVA for config-dependent gaps)
         testbench-dev    → test_coverage_fill_rN.py (one test per guidance row + plan)
         eda-runner       → regression with new tests → updated coverage
Round N+1: coverage-analyst re-analyzes → new guidance for remaining gaps

This iterates until coverage targets are met or all remaining gaps are justified as waived.

Systematic Parameter Space Analysis (Config-Dependent Gaps)

When coverage gaps depend on configuration/parameter combinations (e.g., PPS settings, QP values, pixel formats, buffer sizes), test-plan-writer applies systematic test design methodology before testbench-dev generates tests:

1. Equivalence Class Partitioning (ECP): Partition each parameter into equivalence classes that produce the same coverage behavior. Example for a rate control module:

   • bits_per_pixel: {low (< 4), medium (4-8), high (> 8)}
   • initial_qp: {min boundary, mid-range, max boundary}
   • pixel_entropy: {flat, textured, edge-heavy}

2. Boundary Value Analysis (BVA): For each parameter, test at min, min+1, nominal, max-1, max

3. Combination strategy: Use pairwise/all-pairs for 3+ parameters to keep test count manageable while covering all 2-way interactions

4. Trigger condition: coverage-analyst identifies gaps that correlate with specific parameter configurations (e.g., "toggle coverage low on RC buffer overflow path — only reachable when bits_per_pixel < 4 AND initial_qp > 45") → test-plan-writer is invoked for systematic parameter space partitioning

test-plan-writer produces sim/{module}/coverage/directed_test_plan.md which testbench-dev consumes alongside the Directed Test Guidance table.

Coverage Exclusion Protocol

When coverage-driven regression converges without meeting targets:

1. Convergence detection: 2 consecutive iterations with < 0.5% improvement → converged
2. Uncovered bin analysis: Classify each uncovered bin as:
   • STIMULUS_GAP: Reachable but not exercised → add directed test
   • STRUCTURAL_DEAD: Unreachable code (parameter guard, unimplemented feature) → exclude with waiver
   • INFRA_CODE: TB/UVM infrastructure not under test → exclude from report scope
3. Exclusion file: Generate tool-neutral exclusion manifest (coverage-exclusions.json) listing each excluded bin. Per-tool export: Verilator/lcov --remove filter, VCS URG -elfile, Xcelium IMC exclusion file, or Questa UCDB exclusion as applicable
4. Documentation: Record each exclusion in reviews/phase-5-verify/{module}-coverage-exclusions.md with: bin name, module, reason, approver
5. Approval: Default approver is coverage-analyst (automated) for standard exclusion categories (UVM/TB infrastructure, parameter guards, toggle on wide buses). Non-standard exclusions (unimplemented features, any bin where spec applicability is ambiguous) require user approval via AskUserQuestion before finalizing
6. Adjusted targets: Report both raw and excluded coverage numbers

Exclusion Categories

Coverage Data Processing and Gap Prioritization

Coverage data processing with Verilator:

# Annotate source files with coverage data
verilator_coverage --annotate coverage_annotated/ coverage.dat

# Convert to lcov for HTML reports
verilator_coverage --write-info coverage.info coverage.dat
genhtml coverage.info -o sim/coverage/html/

Gap prioritization heuristics:

• Critical: uncovered error/safety paths (overflow, underflow, reset, ECC)
• High: uncovered protocol corner cases (backpressure, burst boundary, empty/full)
• Medium: uncovered performance paths (stall, pipeline bubble)
• Low: uncovered debug/diagnostic paths (no functional impact)
• Waive: structurally unreachable code (dead FSM states, impossible combinational conditions)

Benign vs Critical Gap Assessment

Not all uncovered bins indicate missing tests. Before generating directed tests, coverage-analyst must classify each gap as critical (requires test) or benign (can be documented and accepted):

Benign gaps are recorded in the coverage report with justification (not silently excluded).

Per-Metric Convergence Tracking

Track convergence independently for each coverage metric:

A metric is converged when 2 consecutive rounds show < 0.5% improvement FOR THAT METRIC. Overall convergence requires ALL metrics either meeting target or individually converged. This prevents aggregate convergence masking a single lagging metric.

Toggle Coverage Interpretation

When toggle coverage converges below target despite diverse stimulus:

1. Per-signal toggle analysis: identify signals with < 10% toggle rate
2. Root cause classification:
   • STIMULUS: Data values don't exercise full range → add directed sequence
   • PARAMETERIZATION: Bus wider than needed for current config → design issue, not test issue
   • STRUCTURAL: Tied/constant signals → exclude with waiver
3. If PARAMETERIZATION: file as design improvement recommendation (Phase 3 bus width parameterization violation), do NOT add more test sequences
4. Anti-pattern: repeatedly adding sequences for structurally-zero upper bits on over-wide buses — this wastes regression time without coverage improvement

Detection Heuristic

When coverage-analyst observes a module where:

• Upper N bits of a wide bus have 0% toggle across ALL seeds and ALL tests
• Lower bits have normal toggle (> 50%) → Classify as PARAMETERIZATION, not STIMULUS_GAP. Report the bus width vs actual data range mismatch and recommend parameterized width derivation per rtl-p3-uarch-policy.

Configuration-to-Code-Path Mapping

When designs have configurable parameters that activate different code paths (e.g., PPS settings in codecs, mode registers in processors, feature enables in peripherals):

1. test-plan-writer must identify which parameters control which code paths, as a mapping table with columns | Parameter | Value Range | Code Path Activated | Coverage Impact | (e.g., mode_reg = BYPASS → bypass datapath activated → branch coverage in {module}_ctrl)

2. coverage-analyst uses this mapping to diagnose coverage gaps:

   • Gap in rate_control branch? → Check if low-bpp config was tested
   • Gap in recon_engine toggle? → Check if high-QP config was tested

3. testbench-dev generates test variants with config constraints matched to uncovered paths

Convergence estimation: if N random seeds cover M% of bins, estimate additional seeds needed using the formula: seeds_needed ≈ N × ln(100/(100-target)) / ln(100/(100-M)). This is approximate — directed tests are always more efficient for specific uncovered bins.