Bm Setup

Basic Memory for Codex Setup

Set up the current repo so Codex can orient from Basic Memory and checkpoint work back into it. Keep the interview short, but always ask before choosing where data will be written.

Preconditions

Confirm Basic Memory is reachable before changing files:

1. Prefer MCP: call list_memory_projects.
2. If MCP tools are not available, run basic-memory --version or bm --version.
3. If neither works, stop and tell the user to install Basic Memory and connect the MCP server. The plugin bundles an .mcp.json that starts uvx --prerelease=allow basic-memory mcp.
4. List available projects before the interview. Include cloud/local source, workspace, qualified name, and project id when available.

Interview

Ask the user to choose the project mapping. Do not infer write targets from the repo, default project, current directory, or previous local state.

• config level: user-level ~/.codex/basic-memory.json or project-level .codex/basic-memory.json. Ask explicitly and recommend user level by default. Project settings override user settings key by key.
• storage mode: cloud, local, or mixed. Prefer the user's stated mode over any CLI default.
• focus: code/dev, research, writing, planning, or mixed.
• sessionProfile: coding or general. Recommend coding for code/dev. For mixed use, ask whether this repository should capture Git and pull-request context. Do not infer coding merely because the current directory is a Git checkout.
• primaryProject: an existing Basic Memory project or a new one to create.
• secondaryProjects: optional read-only projects for session-start context.
• teamProjects: optional share targets for bm-share.
• captureFolder: default codex/<repo-dir>, derived from the Git top-level directory. Ask only when the user wants an explicit override.
• rememberFolder: default codex/remember.
• placementConventions: a short note about where decisions, tasks, and research notes should land. Default decisions to codex/decisions so Codex-authored memory stays under one tree.
• checkpointOnCompact: whether post-compaction SessionStart asks Codex to run bm-checkpoint. Default to true; an explicit JSON boolean false opts out.
• captureEvents: whether to record lifecycle-event envelopes in the local hook inbox. Default to true; an explicit JSON boolean false opts out.
• MCP approvals: ask the user to choose exactly one of these two modes:
  1. Keep Codex's default approval behavior. This requires no Codex config change.
  2. Pre-approve eligible tools from the Basic Memory MCP server. This sets default_tools_approval_mode = "approve" only for Basic Memory. Do not offer a per-tool or write-only trust profile. Explain that server trust changes Codex's approval UX but does not grant Basic Memory access to any new workspace, project, or files. Codex still requires approval for tools that advertise a destructive annotation, including Basic Memory's write, edit, and delete tools.

For the coding session profile, verify the current directory is inside a Git repository. Resolve a stable repository identifier such as owner/name from the current GitHub repository or origin remote, show it to the user, and ask for confirmation. Do not guess when the remote is missing or ambiguous. Explain that coding checkpoints store structured repository, branch, SHA, working-directory, and optional pull-request metadata in Basic Memory.

Explain the capture tradeoff before asking: enabled capture adds a local event trail that stays queued until bm hook flush archives it locally. It never creates knowledge-graph notes or writes to team projects. The default is enabled; an explicit JSON boolean false disables it, and malformed values fail closed.

If there are duplicate names, show qualified names and ask the user which one to use. Prefer qualified project names or project ids for cloud projects. Never pick between cloud and local variants without confirmation.

For a new or empty project, suggest a light convention instead of creating empty folders. For an existing project, inspect list_directory and a few notes before summarizing the real convention.

Apply

After confirming the plan, write the shared settings to the chosen user-level or project-level file:

{
  "basicMemory": {
    "primaryProject": "<project-ref>",
    "secondaryProjects": [],
    "projectMode": "cloud",
    "teamProjects": {},
    "focus": "<focus>",
    "sessionProfile": "<general-or-coding>",
    "rememberFolder": "codex/remember",
    "recallTimeframe": "7d",
    "checkpointOnCompact": true,
    "captureEvents": true,
    "placementConventions": "Put decisions in codex/decisions/ and work checkpoints in codex/<repo-dir>/."
  }
}

Omit captureFolder to use codex/<repo-dir>; persist it only for an explicit override. Preserve unrelated keys if the chosen file already exists. Include projectMode when the user chose cloud, local, or mixed routing. Always persist checkpointOnCompact and captureEvents as JSON booleans. These files are intentionally Codex-specific; do not write .claude/settings.json.

For a user-level coding setup, omit sessionProfile from the shared user file and keep both the coding profile and confirmed repository identifier in the project file so neither can affect other repositories:

{
  "basicMemory": {
    "sessionProfile": "coding",
    "repository": "owner/name"
  }
}

For a project-level setup, add repository to the shared settings in that same project file.

Persist sessionProfile explicitly in the chosen file, except for a user-level coding setup where it belongs in the project file alongside repository. Persist repository only for the coding profile, after the user confirms it. A coding setup is incomplete without a repository identifier because the coding_session schema requires queryable Git identity fields.

Apply MCP Approval Choice

The approval choice belongs in ~/.codex/config.toml, not .codex/basic-memory.json.

If the user keeps Codex's default approval behavior, do not change ~/.codex/config.toml.

If the user chooses to pre-approve eligible Basic Memory tools, inspect the existing Codex configuration and identify which Basic Memory server entry is active:

• For the marketplace plugin, use:

  [plugins."codex@basic-memory".mcp_servers.basic-memory]
  default_tools_approval_mode = "approve"
  

• For a standalone MCP server, add the setting to its existing table:

  [mcp_servers.basic-memory]
  default_tools_approval_mode = "approve"
  

If both entries exist and the active route is unclear, ask the user which one Codex should use. Do not set both silently. Before editing the user-level Codex configuration, show the exact change and get explicit confirmation. Preserve all unrelated TOML keys and never create a duplicate table. If the file cannot be edited safely, provide the exact applicable snippet as a pending setup step.

This server-scoped setting reduces prompts for eligible tools without weakening Codex's global approval policy. It cannot suppress Codex's mandatory approval for MCP tools that advertise a destructive annotation, so Basic Memory writes, edits, and deletes may still prompt. Do not set approval_policy = "never" or change sandbox settings. Tell the user to start a new Codex thread after the config change. Managed organization policy may impose additional approvals.

Seed Schemas

Read the schema files from <plugin-root>/schemas/. This skill lives at <plugin-root>/skills/bm-setup/SKILL.md, so the schemas are two directories up.

Seed the session schema relevant to the selected profile into the chosen primaryProject if it does not already exist:

• coding-session.md for sessionProfile: coding
• codex-session.md for sessionProfile: general

Then seed these schemas for both profiles:

• decision.md
• task.md

These schemas cover notes Codex writes directly. Lifecycle envelopes are not notes: bm hook flush archives that operational trace locally, so there is no projected session or tool-ledger schema to seed.

Use write_note with directory="schemas", note_type="schema", schema frontmatter as metadata, and the markdown body as content. Do not paste the YAML frontmatter into content.

Before seeding schemas, restate the exact target project and ask for confirmation if it differs from the user's selected primary project or if routing is ambiguous.

Verify

Before closing, prove the mapping works:

• Search the primary project for type=schema with page size 10. For a coding setup, confirm the Coding Session schema is present.
• Search one shared project for open decisions if shared projects were configured.
• Run basic-memory hook status --harness codex --project-dir <repo-root> (using bm or uvx --prerelease=allow basic-memory if needed). Confirm that it finds this repo's settings, reports the selected project, session profile, repository, and intended checkpoint-prompt and capture states. Its inbox counts are shared across harnesses.
• If any check errors, fix the project ref or hook launcher before finishing.

Finish with the project mapping, schemas seeded or skipped, checkpoint prompt, capture choice, MCP approval mode, shared inbox status, and the verification result. Tell the user that plugin hooks need to be reviewed and trusted in Codex before they run.