Ad Discovery

AD Attack Discovery

You are helping a penetration tester enumerate an Active Directory domain and identify attack paths. All testing is under explicit written authorization.

This skill works at three access levels:

1. No credentials — network-level recon, poisoning, RID cycling
2. Username only — AS-REP roasting, Kerberos user validation
3. Valid credentials — full enumeration, BloodHound, ADCS, ACLs

Engagement Logging

Check for ./engagement/ directory. If absent, proceed without logging.

When an engagement directory exists:

• Print [ad-discovery] Activated → <target> to the screen on activation.
• Evidence → save significant output to engagement/evidence/ with descriptive filenames (e.g., sqli-users-dump.txt, ssrf-aws-creds.json).

Scope Boundary

This skill covers Active Directory discovery — enumerating domain objects, identifying misconfigurations, and reporting findings to the orchestrator. When you confirm an exploitable finding — STOP.

Do not load or execute another skill. Do not continue past your scope boundary. Instead, return to the orchestrator with:

• What was found (vulns, credentials, access gained)
• Detection details (finding type, affected objects, evidence)
• Context for technique execution (credentials, DC hostname, domain name, etc.)

The orchestrator decides what runs next. Your job is to execute this skill thoroughly and return clean findings.

Stay in methodology. Only use techniques documented in this skill. If you encounter a scenario not covered here, note it and return — do not improvise attacks, write custom exploit code, or apply techniques from other domains. The orchestrator will provide specific guidance or route to a different skill.

You MUST NOT:

• Perform Kerberoasting or AS-REP roasting beyond identifying targets
• Exploit delegation misconfigurations
• Exploit ACL misconfigurations
• Perform credential dumping
• Forge tickets
• Perform coercion or relay attacks
• Exploit ADCS beyond enumeration

When you find exploitable attack paths, present routing recommendations in your return summary. Do not continue past enumeration.

State Management

Call get_state_summary() from the state MCP server to read current engagement state. Use it to:

• Skip re-testing targets, parameters, or vulns already confirmed
• Leverage existing credentials or access for this technique
• Understand what's been tried and failed (check Blocked section)

State Writes

Write actionable findings immediately via state so the orchestrator can react in real time (via event watcher) instead of waiting for your full return summary. Use these tools as you discover findings:

• add_credential() — valid credentials (pre-created computer accounts, gMSA readable, cleartext in descriptions/GPP/shares)
• add_vuln() — ADCS misconfigs (ESC1-ESC8), Kerberoastable accounts, coercion vectors, SMB signing disabled, LDAP signing not required
• add_pivot() — delegation paths, ACL abuse chains, trust relationships, new subnets from AD Sites
• add_blocked() — techniques attempted and failed (so orchestrator doesn't re-route) Your return summary must include:
• New targets/hosts discovered (with ports and services)
• New credentials or tokens found
• Access gained or changed (user, privilege level, method)
• Vulnerabilities confirmed (with status and severity)
• Pivot paths identified (what leads where)
• Blocked items (what failed and why, whether retryable)

Prerequisites

• Network access to the target domain (ports 88, 135, 389, 445, 636)
• For unauthenticated enumeration: just network access
• For authenticated enumeration: valid domain credentials (any privilege level)
• Tools: netexec (nxc), bloodhound-python or rusthound-ce, certipy, bloodyAD, kerbrute, Impacket suite (GetUserSPNs.py, GetNPUsers.py, lookupsid.py)

Kerberos-first authentication (when credentials are available):

This skill may start unauthenticated. Once credentials are obtained, switch to Kerberos authentication for all subsequent enumeration:

# Get a TGT (password, hash, or AES key)
# Use getTGT.py or impacket-getTGT — both are the same tool (see Troubleshooting)
getTGT.py DOMAIN/user:'Password123'@dc.domain.local
# or with NTLM hash
getTGT.py DOMAIN/user@dc.domain.local -hashes :NTHASH

export KRB5CCNAME=user.ccache

# Then use -k -no-pass on all Impacket tools
# Use --use-kcache on NetExec
# Use -k on Certipy and bloodyAD

Step 1: Initial Reconnaissance

Identify domain controllers and assess the network posture.

Find Domain Controllers

# DNS SRV records
nslookup -type=srv _ldap._tcp.dc._msdcs.DOMAIN.LOCAL
nslookup -type=srv _kerberos._tcp.DOMAIN.LOCAL

# NetExec SMB scan — shows OS, signing, SMBv1
nxc smb 10.10.10.0/24

# NetExec generate /etc/hosts entries
nxc smb 10.10.10.0/24 --generate-hosts-file hosts

Check Signing and Relay Posture

# SMB signing — signing:False = relay target
nxc smb 10.10.10.0/24 | grep -i "signing:False"

# LDAP signing — signing:None = relay to LDAP viable
nxc ldap DC01.DOMAIN.LOCAL

# Determine if LDAPS is available
nxc ldap DC01.DOMAIN.LOCAL --port 636

Findings:

• SMB signing disabled on non-DCs -> note for coercion/relay
• LDAP signing not required -> note for relay to LDAP
• Domain name, DC hostnames, OS versions -> record in the engagement state

State writes:

• SMB signing disabled → add_vuln(title="SMB signing disabled on <host>", host="<host>", vuln_type="smb-signing", severity="medium")
• LDAP signing not required → add_vuln(title="LDAP signing not required on <host>", host="<host>", vuln_type="ldap-signing", severity="medium")
• Domain name/hostnames discovered → add_pivot(source="AD discovery", destination="<domain>/<hostname>", method="DNS/SMB enumeration")

Step 2: Unauthenticated Enumeration

Use when no valid credentials are available yet.

Null Session / Guest Access

# SMB null session
nxc smb DC01.DOMAIN.LOCAL -u '' -p ''
nxc smb DC01.DOMAIN.LOCAL -u 'guest' -p ''

# enum4linux
enum4linux -a -u "" -p "" DC01.DOMAIN.LOCAL

# rpcclient
rpcclient -U "" -N DC01.DOMAIN.LOCAL -c "enumdomusers;enumdomgroups;querydominfo"

RID Cycling (Unauthenticated User Enumeration)

# NetExec — enumerate users via RID brute force
nxc smb DC01.DOMAIN.LOCAL -u 'guest' -p '' --rid-brute 10000

# Impacket
lookupsid.py -no-pass 'guest@DC01.DOMAIN.LOCAL' 20000

# Extract just usernames
nxc smb DC01.DOMAIN.LOCAL -u '' -p '' --rid-brute \
  | awk -F'\\\\| ' '/SidTypeUser/ {print $3}' > users.txt

Kerberos Username Enumeration

# kerbrute — validates usernames via Kerberos pre-auth responses
# Generates Event 4771, NOT 4625 (often less monitored)
kerbrute userenum -d DOMAIN.LOCAL --dc DC01.DOMAIN.LOCAL usernames.txt

Use output as username list for password spraying and AS-REP roasting checks.

Unauthenticated ADCS CA Enumeration

# Enumerate Certificate Authorities via RPC — no credentials needed
nxc smb DC01.DOMAIN.LOCAL -M enum_ca

If CAs found, note for authenticated ADCS enumeration in Step 3 (certipy).

LLMNR/NBT-NS/mDNS Poisoning Check

If network position allows, note LLMNR/NBT-NS traffic for Responder-based hash capture. → STOP. Return to orchestrator with: DC IP, domain name, network position, LLMNR/NBT-NS traffic details. Do not execute poisoning or relay commands inline.

Step 3: BloodHound Collection

The single highest-value enumeration step. Requires valid domain credentials.

Linux (Remote Collection)

# bloodhound-python — LDAP-based, remote
bloodhound-python -d DOMAIN.LOCAL -u 'user' -p 'Password123' \
  -gc DC01.DOMAIN.LOCAL -c all -ns DC_IP

# rusthound-ce — faster, includes ADCS data
rusthound-ce -d DOMAIN.LOCAL -u 'user@DOMAIN.LOCAL' -p 'Password123' \
  -o /tmp/bloodhound -z --adcs

# With Kerberos auth
export KRB5CCNAME=user.ccache
bloodhound-python -d DOMAIN.LOCAL -u 'user' -k -no-pass \
  -gc DC01.DOMAIN.LOCAL -c all

Windows (On-Host Collection)

# SharpHound — full collection
.\SharpHound.exe -c all -d DOMAIN.LOCAL --searchforest

# Stealthier — DC-only mode (no host enumeration)
.\SharpHound.exe --CollectionMethod DCOnly

# OPSEC — throttle and randomize
.\SharpHound.exe -c all,GPOLocalGroup --throttle 10000 --jitter 23

# SOAPHound — uses ADWS instead of LDAP (avoids LDAP monitoring)
SOAPHound.exe --buildcache -c c:\temp\cache.txt
SOAPHound.exe -c c:\temp\cache.txt --bhdump -o c:\temp\bh-output
SOAPHound.exe -c c:\temp\cache.txt --certdump -o c:\temp\bh-output

ADCS Certificate Data

# Certipy — full certificate template enumeration
certipy find 'DOMAIN/user:Password123@DC01.DOMAIN.LOCAL' \
  -output engagement/evidence/certipy-full-DOMAIN

# Find vulnerable templates only
certipy find 'DOMAIN/user:Password123@DC01.DOMAIN.LOCAL' -vulnerable -hide-admins \
  -output engagement/evidence/certipy-vulnerable-DOMAIN

# With Kerberos
certipy find 'DOMAIN/user@DC01.DOMAIN.LOCAL' -k \
  -output engagement/evidence/certipy-full-DOMAIN

State writes: Vulnerable ADCS templates found → add_vuln(title="ADCS <ESC_type> on <template>", host="<CA_host>", vuln_type="adcs", severity="high").

Certipy output: Always use -output engagement/evidence/certipy-<label> to write results to the evidence directory. Without -output, certipy writes {timestamp}_Certipy.{json,txt} to CWD, polluting the working directory.

Certipy version notes:

• Certipy v5.0+ removed the -bloodhound flag. Run certipy find without it — v5 outputs JSON by default. Import the JSON into BloodHound CE manually.
• If -vulnerable returns 0 results, re-run without it to get the full template list. Some ESC variants (ESC9-15) require manual analysis of the full output rather than certipy's built-in vulnerability checks.

BloodHound Analysis Priorities

After importing data, run these queries first:

1. Shortest Paths to Domain Admins — identify the quickest win
2. Kerberoastable Users — prioritize by blast radius and pwdLastSet age
3. AS-REP Roastable Users — free hashes, no special access needed
4. Unconstrained Delegation — TGT harvesting opportunities
5. Dangerous ACLs — GenericAll/WriteDACL/WriteOwner on high-value targets
6. ADCS Attack Paths — ESC1-ESC15 (requires certipy data import)
7. Owned -> Domain Admins — mark owned principals and find chains

Step 4: Targeted Enumeration

Deeper enumeration beyond BloodHound. Run these based on what BloodHound reveals.

Password Policy

# NetExec
nxc smb DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' --pass-pol

# enum4linux
enum4linux -u 'user' -p 'Password123' -P DC01.DOMAIN.LOCAL

# PowerView
(Get-DomainPolicy)."SystemAccess"

Record lockout threshold, observation window, complexity requirements. Report for password spraying decisions.

Fine-Grained Password Policies (PSOs)

# Fine-grained password policies — different groups may have different lockout rules
nxc ldap DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M pso

PSOs override default domain policy for specific groups. A service account group may have no lockout while user accounts lock at 5 attempts. Report any PSOs found — they affect password spraying decisions.

Pre-Windows 2000 Computer Accounts

High-value quick win. Pre-created computer accounts (created via "Pre-Windows 2000 Compatible" checkbox in ADUC or New-ADComputer) often have their password set to the sAMAccountName in lowercase, minus the trailing $. For example, MS01$ has password ms01. This is a common administrative oversight that yields machine account credentials with zero noise.

# Identify pre-created computer accounts and test default passwords
# The module checks for accounts and attempts TGT with default password
nxc ldap DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M pre2k

What pre2k checks:

1. Finds computer accounts in the "Pre-Windows 2000 Compatible Access" group or with userAccountControl flags indicating pre-creation
2. Tests each account with sAMAccountName.rstrip('$').lower() as the password
3. Attempts to obtain a TGT — if successful, the password is confirmed

Why this matters:

• Machine accounts often have broad read rights (BloodHound "Owned" marking)
• Machine accounts in groups like "Domain Secure Servers" can read gMSA passwords
• Machine accounts may have constrained delegation, RBCD, or other privileges
• A pre2k computer account is functionally equivalent to a domain user credential but with a machine account's group memberships and trust level

If pre2k finds valid machine credentials → write immediately: add_credential(username="MACHINE$", secret="machine", source="pre2k module on <DC>"). Also record in your return summary: account name, confirmed password, and any group memberships or privileges visible from LDAP.

NetExec Module Sweep

Run these modules as a batch during authenticated enumeration. They are all non-destructive and low-privilege — any domain user can run them.

Quick-Win Credential Checks

# User descriptions — frequently contain cleartext passwords
nxc ldap DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M get-desc-users

# GPP cpassword in SYSVOL (MS14-025)
nxc smb DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M gpp_password

# Autologon credentials from registry.xml in SYSVOL
nxc smb DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M gpp_autologin

User descriptions are a common source of cleartext passwords — admins often document initial passwords or service account passwords in the AD description field. Any result containing password-like strings is a credential finding. Write immediately: add_credential(username=..., secret=..., source="AD description field").

Coercion & Relay Surface

# WebClient service (WebDAV) — enables HTTP-based NTLM coercion
# Critical: if WebDAV is running, coercion can use HTTP instead of SMB
# which bypasses SMB signing and enables relay to LDAP/ADCS
nxc smb DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M webdav

# Print Spooler — enables PrinterBug/SpoolSample coercion
nxc smb DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M spooler

# Broad coercion vulnerability check (check-only mode — no LISTENER set)
# Tests for PetitPotam, PrinterBug, DFSCoerce, ShadowCoerce, MSEven, etc.
nxc smb DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M coerce_plus

Note all coercion-eligible hosts. WebDAV is especially valuable — it enables HTTP-based coercion that works even when SMB signing is enforced.

State writes: Coercion-eligible hosts → add_vuln(title="Coercion: <type> on <host>", host="<host>", vuln_type="coercion", severity="medium").

Attack Surface Mapping

# AV/EDR detection — identifies endpoint security products
nxc smb DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M enum_av

# MachineAccountQuota — can current user add computer accounts?
# MAQ > 0 enables resource-based constrained delegation (RBCD) attacks
nxc ldap DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M maq

# Obsolete/EOL operating systems — unpatched, vulnerable to known CVEs
nxc ldap DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M obsolete

# BadSuccessor (dMSA) — CVE-2025-21293, privilege escalation via
# delegated Managed Service Accounts
nxc ldap DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M badsuccessor

Network Topology

# DNS records from AD — all A/AAAA/CNAME/SRV records in the domain
nxc ldap DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M get-network

# AD Sites and Subnets — reveals internal network segmentation
nxc ldap DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M subnets

# Additional network interfaces on hosts (multi-homed pivot targets)
nxc smb DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M ioxidresolver

SCCM and Infrastructure

# SCCM discovery via LDAP
nxc ldap DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M sccm

# Entra ID (Azure AD Connect) sync server
nxc ldap DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M entra-id

# DNS zones allowing nonsecure dynamic updates (ADIDNS poisoning)
nxc ldap DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M dns-nonsecure

If SCCM found → note for SCCM exploitation. If Entra ID Connect server found → high-value target (stores cleartext AD sync credentials). If nonsecure DNS updates allowed → note for ADIDNS poisoning (enables MITM/coercion without LLMNR).

ADIDNS Zone ACL Check

Standard in most AD environments. Authenticated Users have CreateChild on AD-Integrated DNS zones by default, allowing any domain user to create new A records. This enables ADIDNS poisoning: redirect hostnames that don't have DNS records (or that you can overwrite) to the attackbox for credential capture.

# Check zone ACL — look for Authenticated Users with CreateChild
# Use dacledit to read the ACL on the DNS zone object
dacledit.py -action read -target-dn \
  'DC=DOMAIN.LOCAL,CN=MicrosoftDNS,DC=DomainDnsZones,DC=DOMAIN,DC=LOCAL' \
  'DOMAIN/user:Password123@DC01.DOMAIN.LOCAL'

# List existing DNS records (look for gaps — hostnames referenced but missing)
# dnstool.py is from krbrelayx toolkit
python3 /opt/krbrelayx/dnstool.py -u 'DOMAIN\user' -p 'Password123' \
  -r '*' --action query DC01.DOMAIN.LOCAL

Cross-reference with engagement state: Check for unreachable hostnames in the pivot map or blocked items — linked server data sources, SPN hostnames, or service references that resolved to nothing. If an expected hostname has no DNS A record and Authenticated Users can create records, this is a high-value pivot: create an A record pointing to the attackbox, then capture credentials when the service authenticates.

State writes: ADIDNS CreateChild confirmed → add_vuln(title="ADIDNS: Authenticated Users can create DNS records", host="<DC>", vuln_type="adidns-poisoning", severity="critical"). Cross-reference with unreachable hostnames → add_pivot(source="ADIDNS poisoning", destination="<hostname> → attackbox for credential capture", method="Create A record for <hostname> pointing to attackbox, trigger service authentication, capture with Responder").

SPN Enumeration (Kerberoasting Targets)

# Impacket — list accounts with SPNs
GetUserSPNs.py DOMAIN/user:'Password123' -dc-ip DC_IP

# NetExec
nxc ldap DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' --kerberoasting output.txt

# Rubeus — stats only (no ticket requests)
.\Rubeus.exe kerberoast /stats

If SPNs found on user accounts → STOP. Report: DC IP, domain name, SPN list, current credentials. Do not request or crack service tickets inline.

AS-REP Roastable Accounts

# Impacket — enumerate users without pre-auth
GetNPUsers.py DOMAIN/user:'Password123' -dc-ip DC_IP

# bloodyAD — LDAP filter for DONT_REQ_PREAUTH
bloodyAD -u user -p 'Password123' -d DOMAIN.LOCAL --host DC_IP \
  get search --filter '(&(userAccountControl:1.2.840.113556.1.4.803:=4194304)(!(UserAccountControl:1.2.840.113556.1.4.803:=2)))' \
  --attr sAMAccountName

If found → STOP. Report: DC IP, domain name, AS-REP roastable user list, current credentials. Do not request or crack AS-REP hashes inline.

Delegation Enumeration

# Unconstrained delegation
bloodyAD -u user -p 'Password123' -d DOMAIN.LOCAL --host DC_IP \
  get search --filter '(userAccountControl:1.2.840.113556.1.4.803:=524288)' \
  --attr sAMAccountName,dNSHostName

# Constrained delegation
bloodyAD -u user -p 'Password123' -d DOMAIN.LOCAL --host DC_IP \
  get search --filter '(msDS-AllowedToDelegateTo=*)' \
  --attr sAMAccountName,msDS-AllowedToDelegateTo

# RBCD
bloodyAD -u user -p 'Password123' -d DOMAIN.LOCAL --host DC_IP \
  get search --filter '(msDS-AllowedToActOnBehalfOfOtherIdentity=*)' \
  --attr sAMAccountName

# PowerView
Get-DomainComputer -Unconstrained
Get-DomainUser -TrustedToAuth
Get-DomainComputer -TrustedToAuth

State writes: Delegation paths found → add_pivot(source="<account>", destination="<target_service>", method="<unconstrained|constrained|RBCD> delegation").

If found → STOP. Report: DC IP, domain name, delegation type and targets, current credentials. Do not exploit delegation inline.

Privileged Group Membership

# AdminCount=1 (privileged group members, may have stale perms)
nxc ldap DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' --admin-count

# Specific dangerous groups
bloodyAD -u user -p 'Password123' -d DOMAIN.LOCAL --host DC_IP \
  get object "DNSAdmins" --attr msds-memberTransitive
bloodyAD -u user -p 'Password123' -d DOMAIN.LOCAL --host DC_IP \
  get object "Backup Operators" --attr msds-memberTransitive

LAPS / gMSA / dMSA

# LAPS — check if current user can read local admin passwords
nxc ldap DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M laps

# gMSA — readable managed service account passwords
nxc ldap DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' --gmsa

If readable → STOP. Report: DC IP, domain name, LAPS/gMSA target details, current credentials. Do not extract managed passwords inline.

Trust Enumeration

# NetExec
nxc ldap DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -M enum_trust

# Impacket
nltest /domain_trusts /all_trusts /v

# PowerView
Get-DomainTrust
Get-NetForestDomain
Get-DomainForeignUser
Get-DomainForeignGroupMember

If trusts found → STOP. Report: DC IP, domain name, trust relationships enumerated, trust types and directions, current credentials. Do not exploit trust relationships inline.

Share Enumeration

# NetExec — find accessible shares
nxc smb 10.10.10.0/24 -u 'user' -p 'Password123' --shares

# Spider shares for sensitive files — use manspider for keyword/regex content search
# manspider runs from the attackbox via Bash (quick pass — orchestrator may task deeper review)
manspider DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -d DOMAIN \
  -c password passwd cred secret connectionstring
manspider DC01.DOMAIN.LOCAL -u 'user' -p 'Password123' -d DOMAIN \
  -e '(password|passwd|pwd)\s*[=:]\s*\S+' -f xml conf config ini txt ps1 bat vbs kdbx

Check SYSVOL/NETLOGON for Group Policy Preferences (GPP) passwords, scripts with embedded credentials, and configuration files.

High-value file patterns in shares — when spidering user home directories, SYSVOL, or custom shares, look for:

Download and inspect any XML files found in user home directories — Azure AD credential exports are a common source of cleartext domain passwords.

Session Enumeration

# Where are high-value users logged in?
nxc smb 10.10.10.0/24 -u 'user' -p 'Password123' --sessions
nxc smb 10.10.10.0/24 -u 'user' -p 'Password123' --loggedon-users

# PowerView
Invoke-UserHunter -Stealth
Find-DomainUserLocation

Local Admin Access

# Where does the current user have local admin?
nxc smb 10.10.10.0/24 -u 'user' -p 'Password123'
# Look for (Pwn3d!) in output

# PowerView
Find-LocalAdminAccess -Verbose

If local admin found → STOP. Report: target hostname, local admin credentials, DC IP, domain name. Do not dump credentials inline.

SCCM / Deployment

# SCCM discovery
python3 sccmhunter.py find -u 'user' -p 'Password123' -d DOMAIN.LOCAL -dc-ip DC_IP

If SCCM found → STOP. Report: DC IP, domain name, SCCM server details, current credentials. Do not exploit SCCM inline.

Step 5: Prioritize and Return

After mapping the attack surface, STOP and return to the orchestrator with all findings categorized by type and priority.

Priority Order

When multiple attack paths exist, prioritize by OPSEC and reliability:

1. Pre-2k computer accounts / GPP passwords / description creds — instant credentials, zero noise, no cracking needed
2. Kerberos roasting / AS-REP roasting — offline cracking, low detection
3. ADCS template abuse — certificate-based, stealthy, persistent
4. ACL abuse — targeted, often unmonitored
5. Delegation abuse — Kerberos-based, moderate detection
6. Password spraying — risk of lockout, use as last resort for initial access
7. Coercion/relay — requires network position, noisy
8. Credential dumping — requires existing admin access

Return Summary

Present all findings with:

• Multiple paths identified: Present the top 3 paths ranked by OPSEC and reliability.
• No clear path: Recommend expanding enumeration scope (additional subnets, different protocols), password spraying, or relay opportunities.
• Credentials found in shares/GPP: Report for deeper authenticated enumeration.

When returning, pass along:

• Target user/host/service
• Current credentials and access level
• Domain name and DC hostname
• Relevant enumeration output

Troubleshooting

BloodHound Collection Fails

• LDAP connection refused: Try port 636 (LDAPS) with --ssl flag
• Access denied: Verify credentials; any domain user can run BloodHound
• Timeout: Use --CollectionMethod DCOnly for stealthier, faster collection
• Missing ADCS data: Run certipy find separately and import JSON into BH CE

Kerberos Errors

• KRB_AP_ERR_SKEW: Clock out of sync (> 5 minutes from DC). This is a Clock Skew Interrupt — stop immediately and return to the orchestrator. Do not retry or fall back to NTLM. Return to orchestrator — clock sync requires sudo which subagents cannot run.
• KDC cannot find the name: Use FQDN hostnames, not IP addresses. If hostnames don't resolve, return to orchestrator with the hostnames and IPs — the orchestrator handles /etc/hosts updates (requires sudo).
• Do NOT run sudo or modify /etc/hosts — subagents lack sudo. Report unresolvable hostnames in your return summary.

NetExec Connection Issues

• SMB SessionError STATUS_NOT_SUPPORTED: Target may require SMBv3 or NTLMv2. Try --smb2 flag
• Connection timed out: Host may be down or firewalled. Try different protocols (LDAP, WinRM, RDP)

bloodyAD LDAP Filter Errors

LDAP filters with ! (NOT operator) can fail due to bash history expansion. Always use single quotes around filters, not double quotes:

# CORRECT — single quotes prevent ! expansion
bloodyAD ... get search --filter '(!(userAccountControl:1.2.840.113556.1.4.803:=2))'

# WRONG — double quotes cause bash to interpret ! as history expansion
bloodyAD ... get search --filter "(!(userAccountControl...))"

If filters still fail, simplify by removing the NOT clause and filtering the output with grep -v instead.

Impacket Tool Naming

Impacket tools may be installed under different names depending on the system:

Check which form is available before use:

which getTGT.py 2>/dev/null || which impacket-getTGT 2>/dev/null

The .py form is common on manually-installed Impacket; the impacket- prefix comes from pip/apt packages.

NoPac Scanner False Positives

The nxc ldap -M nopac scanner compares TGT sizes with and without PAC. The target is only vulnerable when tgt_no_pac < tgt_with_pac (different sizes). If both sizes are equal (e.g., 1548 == 1548), the target is NOT vulnerable — the PAC was not removed, meaning the patch is applied. Do not report equal PAC sizes as a NoPac vulnerability.

No Credentials Available

Start with:

1. RID cycling for username list
2. AS-REP roasting against discovered usernames
3. LLMNR/NBT-NS poisoning (if on-network)
4. Password spraying with common passwords
5. Check for anonymous LDAP bind (nxc ldap DC -u '' -p '')