Network Recon

Network Reconnaissance

You are helping a penetration tester perform network reconnaissance and service enumeration. All testing is under explicit written authorization.

Engagement Logging

Check for ./engagement/ directory. If absent, proceed without logging.

When an engagement directory exists:

• Print [network-recon] Activated → <target> to the screen on activation.
• Evidence → save significant output to engagement/evidence/ with descriptive filenames (e.g., sqli-users-dump.txt, ssrf-aws-creds.json).

Scope Boundary

This skill covers network reconnaissance — host discovery, port scanning, OS fingerprinting, and output parsing. It produces a port/service map; the orchestrator routes to service-specific enumeration skills for deeper checks.

Do not load or execute another skill. Do not continue past your scope boundary. Instead, return to the orchestrator with:

• What was found (hosts, ports, services, OS)
• Recommended next skills based on discovered services
• Context to pass (target IP, open ports, service versions)

The orchestrator decides what runs next. Your job is to scan thoroughly and return a clean port/service map.

Stay in methodology. Only use techniques documented in this skill. If you encounter a scenario not covered here, note it and return — do not improvise attacks, write custom exploit code, or apply techniques from other domains. The orchestrator will provide specific guidance or route to a different skill.

You MUST NOT:

• Enumerate individual services (SMB shares, database access, FTP anonymous) — the orchestrator routes to smb-enumeration, database-enumeration, remote-access-enumeration, or infrastructure-enumeration
• Perform web application testing — route to web-discovery
• Perform AD enumeration — route to ad-discovery
• Perform privilege escalation — route to linux-discovery or windows-discovery
• Test credentials or brute force — route to password-spraying
• Exploit confirmed vulnerabilities — route to the appropriate technique skill

State Management

Call get_state_summary() from the state MCP server to read current engagement state. Use it to:

• Skip re-testing targets, parameters, or vulns already confirmed
• Leverage existing credentials or access for this technique
• Understand what's been tried and failed (check Blocked section)

State Writes

Write actionable findings immediately via state so the orchestrator can react in real time (via event watcher) instead of waiting for your full return summary. Use these tools as you discover findings:

• add_pivot() — new subnets discovered from routing info or nmap traceroute
• add_blocked() — scan failures (host unreachable, firewall blocking) Your return summary must include:
• All discovered hosts (with IP, OS, role)
• Open ports and services per host (formatted as per-host one-liner)
• OS fingerprinting results
• Routing recommendations based on discovered services
• Blocked items (what failed and why, whether retryable)

Prerequisites

• Network access to target(s) — direct or via pivot tunnel
• Target IP, hostname, or CIDR range
• Scope confirmation (which IPs/ranges are authorized)
• nmap installed (core tool — all other tools optional)
• If scanning through a tunnel: check engagement state for tunnel details (type, local endpoint, requires_proxychains, proxychains config path)

Privileged Commands

Claude Code cannot execute sudo commands directly. Nmap requires root for SYN scans, UDP scans, OS detection, and most NSE scripts. How nmap runs depends on whether the nmap MCP server is available.

MCP nmap Server (Subagent Mode)

When running as a subagent with nmap MCP access, use the nmap_scan tool directly — no sudo handoff needed. The MCP server runs sudo nmap in a subprocess and returns parsed JSON.

nmap_scan(target="10.10.10.5", options="-A -p- -T4")

• Returns structured JSON: hosts, ports, services, scripts, OS detection.
• Raw XML is saved to engagement/evidence/ automatically.
• Use get_scan(scan_id) to retrieve previous results.
• The Nmap Is the Gate principle still applies — do not run other network tools until nmap_scan completes and you've parsed the results.

Handoff Protocol (Inline Mode)

When running inline without nmap MCP access, hand off to the user for manual execution. This applies to:

• nmap — SYN scans (-sS), UDP scans (-sU), OS detection (-O), and most NSE scripts that need raw sockets
• responder — LLMNR/NBNS/mDNS poisoning (requires raw sockets)
• mount — NFS/SMB mounting

Handoff protocol:

1. Present the full command including sudo to the user
2. Specify the output file path (ensure commands include -oA, -oG, or -oL flags)
3. Ask the user to run it in their terminal
4. Read the output file when the user confirms completion
5. Continue analysis based on the parsed output

nmap always requires either MCP or the handoff protocol. Do not run nmap directly from Bash — not even non-privileged scan types like -sT or -sV. Unprivileged nmap produces unreliable results (connect scans miss filtered ports, no OS detection, no raw-socket NSE scripts).

Nmap Is the Gate — Hard Stop

After starting an nmap scan (via MCP or handoff), STOP. Do nothing else until scan results are available. No httpx, no curl, no netexec, no nuclei, no "quick triage" — nothing touches the network until nmap results are parsed. The nmap scan is the foundation. Every subsequent decision — which services to enumerate, which skills to route to, which quick wins to check — depends on knowing the full port and service landscape. Running tools before nmap completes wastes time on assumptions, produces duplicate traffic, and risks missing the ports that actually matter.

Non-privileged commands that CAN be executed directly by Claude for post-scan service enumeration (only AFTER nmap results are parsed):

• httpx, netexec, nuclei, whatweb, ffuf
• ldapsearch, smbclient, rpcclient, snmpwalk

Batch all pending privileged commands so the user can run them in one pass. Present them as a numbered list, each with its output file path.

Step 1: Host Discovery

Identify live hosts in the target range. Skip for single-host targets.

# ARP ping (fastest — same subnet only)
sudo nmap -sn -PR 10.10.10.0/24 -oG discovery.gnmap

# ICMP echo + TCP SYN(80,443) + TCP ACK(80) + ICMP timestamp (default -sn)
sudo nmap -sn 10.10.10.0/24 -oG discovery.gnmap

# TCP-only host discovery (ICMP blocked)
sudo nmap -sn -PS22,80,135,443,445,3389,8080 10.10.10.0/24 -oG discovery.gnmap

# UDP host discovery
sudo nmap -sn -PU53,161,137 10.10.10.0/24 -oG discovery.gnmap

# Combined — most thorough
sudo nmap -sn -PE -PP -PS21,22,25,80,113,135,443,445,3389,8080 -PU53,111,137,161 10.10.10.0/24 -oG discovery.gnmap

Parse live hosts for next steps:

# Extract live hosts from nmap greppable output
grep "Status: Up" discovery.gnmap | awk '{print $2}' > live_hosts.txt

Present the list of live hosts. Ask which to scan further or proceed with all.

Pivot Mode — Scanning Through a Tunnel

When the orchestrator says you're scanning through a tunnel (chisel SOCKS, SSH dynamic forward, ligolo, etc.), everything changes. Nmap through proxychains is extremely slow — a /24 with top-1000 ports means 256,000 TCP connect attempts through SOCKS, each timeout ~15 seconds. A full subnet scan can take hours and often times out.

Check the engagement state (get_state_summary()) for tunnel details. The Tunnels section tells you the tunnel type, local endpoint, whether proxychains is required, and which hosts are already known-live.

The nmap MCP Server Does NOT Support Proxychains

The nmap_scan MCP tool runs nmap directly — it cannot route through SOCKS proxies. When scanning through a tunnel that requires proxychains, you MUST use Bash with dangerouslyDisableSandbox: true instead of the nmap MCP server.

All nmap commands through proxychains require these flags:

proxychains4 -f <config_path> nmap -sT -Pn -n [other options] TARGET

• -sT — TCP connect scan (only scan type that works through SOCKS)
• -Pn — skip host discovery (ICMP doesn't work through SOCKS)
• -n — no DNS resolution (avoid DNS leaks outside the tunnel)
• No -sS, -sU, -O, or raw-socket features — SOCKS is TCP-only

Two-Phase Approach (Required for Pivot Scanning)

Never scan an entire subnet with nmap through proxychains. Instead, use a fast Phase 1 to find live hosts, then targeted Phase 2 for port/service detail.

Phase 1: Fast Host Discovery

Use lightweight methods that are much faster than nmap through SOCKS. Try these in order — use whichever works for your access level on the pivot host.

Option A — Commands on the pivot host via existing shell session. If you have a shell on the pivot host (WinRM, SSH, reverse shell), run discovery commands directly on it. No proxychains overhead — these execute locally on the internal network.

Windows pivot host:

# ARP cache — already-known neighbors (instant)
arp -a

# DNS zone dump — if pivot host is a DC or has DNS access
Get-DnsServerResourceRecord -ZoneName <domain> -RRType A | Select-Object HostName, @{N='IP';E={$_.RecordData.IPv4Address}}

# Ping sweep (fast, covers the subnet)
1..254 | ForEach-Object { $ip="192.168.100.$_"; if(Test-Connection -Count 1 -Quiet -TimeoutSeconds 1 $ip){$ip} }

# PowerShell TCP port check on specific hosts (confirm specific services)
Test-NetConnection -ComputerName 192.168.100.2 -Port 445 -InformationLevel Quiet

Linux pivot host:

# ARP cache
arp -a

# Ping sweep
for i in $(seq 1 254); do ping -c1 -W1 192.168.100.$i &>/dev/null && echo "192.168.100.$i alive" & done; wait

# Bash TCP check (no tools needed)
for port in 22 80 135 445 3389 5985; do
  (echo >/dev/tcp/192.168.100.2/$port) 2>/dev/null && echo "192.168.100.2:$port open"
done

Option B — Single-port sweep through proxychains. If you can't run commands on the pivot host, sweep one common port across the subnet. Much faster than scanning many ports per host.

# SMB sweep — fast, catches Windows hosts
proxychains4 -f <config> nxc smb 192.168.100.0/24 --timeout 5 2>&1 | grep -v "timeout"

# Or nmap with a SINGLE port — minimize SOCKS overhead
proxychains4 -f <config> nmap -sT -Pn -n -p 445 192.168.100.0/24 --open -oG pivot_discovery.gnmap

Option C — Combined approach (best results). Run ARP + ping sweep on the pivot host first, then validate with a single-port proxychains sweep to catch hosts that block ICMP.

After Phase 1, collect the list of confirmed live hosts. Only these hosts proceed to Phase 2.

Phase 2: Targeted Port Scanning

Scan ONLY the live hosts found in Phase 1. Use focused port lists, not -p-.

# Common Windows ports — covers most AD/enterprise services
proxychains4 -f <config> nmap -sT -Pn -n -p 21,22,25,53,80,88,110,135,139,143,389,443,445,464,587,636,993,995,1433,2049,3268,3306,3389,5432,5985,5986,8080,8443,9389 <live_host> -oA pivot_scan_HOSTNAME

# If you already know the OS (e.g., from Phase 1 SMB banner), narrow further:
# Windows server — core ports
proxychains4 -f <config> nmap -sT -Pn -n -p 80,88,135,139,389,443,445,636,1433,3268,3389,5985,5986,8080 <live_host> -oA pivot_scan_HOSTNAME

# Linux server — core ports
proxychains4 -f <config> nmap -sT -Pn -n -p 21,22,25,53,80,110,139,143,443,445,993,2049,3306,5432,8080 <live_host> -oA pivot_scan_HOSTNAME

Service version detection — only on confirmed open ports:

# After finding open ports, run -sV on JUST those ports
proxychains4 -f <config> nmap -sT -Pn -n -sV -p <open_ports_csv> <live_host> -oA pivot_svc_HOSTNAME

Timing matters. Through SOCKS, -T4 can cause excessive timeouts. Use -T3 or even -T2 for reliability. Add --max-retries 2 --host-timeout 300s to prevent individual hosts from stalling the entire scan.

Alternative: Static nmap on Pivot Host

For the fastest results, upload a static nmap binary to the pivot host and scan locally. This avoids all SOCKS overhead.

# Download static nmap on attackbox (NOT on target)
# https://github.com/andrew-d/static-binaries or compile yourself

# Transfer to pivot host (via existing shell session)
# Use base64, certutil, or python http server + curl/wget

# Run locally on pivot host — full speed, no proxychains
./nmap -sT -Pn -p- 192.168.100.0/24 -oG /tmp/internal_scan.gnmap

# Pull results back to attackbox for analysis

This is more invasive (leaves artifacts on the pivot host) but orders of magnitude faster. Use when speed matters more than stealth.

Pivot Mode Summary

After pivot scanning, return findings to the orchestrator. The orchestrator routes to service-specific enumeration skills for discovered hosts.

Step 2: Port Scanning

Check the orchestrator's prompt for a Scan type: directive. This tells you what the operator chose:

• quick — top 1000 ports + service detection:

  sudo nmap -sV -sC --top-ports 1000 -T4 -oA scan_HOSTNAME -vvv TARGET_IP
  

• full — all 65535 ports, full enumeration:

  sudo nmap -A -p- -T4 -oA scan_HOSTNAME -vvv TARGET_IP
  

• Custom scan request: ... — the operator described a custom scan. Translate their description into appropriate nmap options. Preserve -oA for output and add -vvv for verbose results.

If no scan type is specified, return and ask the orchestrator — never assume.

The full scan is the go-to for most engagements. -A enables OS detection, version detection, script scanning, and traceroute. -p- scans all 65535 ports. -T4 is aggressive timing suitable for most networks. -oA saves in all formats (.nmap, .gnmap, .xml).

Host Appears Down — -Pn Retry

If the scan returns 0 hosts up (nmap's host discovery probes got no response), retry with -Pn added to the same scan options. Many targets (especially CTF/lab, cloud instances, and firewalled hosts) block ICMP and TCP discovery probes but have open ports.

Rules:

• Add -Pn to the ORIGINAL scan options. Do NOT change the scan type, port range, or any other flags. If the operator chose quick (--top-ports 1000), retry as quick + -Pn. If full (-p-), retry as full + -Pn.
• This retry happens once. If the -Pn scan also returns no open ports, STOP and return to the orchestrator with:
  • What was tried (both scans with exact options)
  • That the host appears unreachable or has no open ports in the scanned range
  • A recommendation to check network connectivity (VPN, routing, firewall)
• Do NOT escalate to a different scan type (e.g., quick → full). Do NOT add -p- to a quick scan. Do NOT run additional scans beyond the one -Pn retry. The orchestrator decides next steps — not you.

Parse scan results:

# Extract open ports from greppable output
grep "open" scan_HOSTNAME.gnmap | awk -F'[/ ]' '{for(i=1;i<=NF;i++) if($i=="open") print $(i-1)}' | sort -un

# Parse nmap XML (useful for piping to other tools)
xmlstarlet sel -t -m "//port[state/@state='open']" -v "@portid" -o ":" -v "service/@name" -n scan_HOSTNAME.xml

Step 3: OS Fingerprinting

If -A didn't provide reliable OS detection:

# Aggressive OS detection
sudo nmap -O --osscan-guess -oA os_HOSTNAME TARGET_IP

# TCP/IP stack fingerprinting
sudo nmap -O -sV --version-intensity 5 -oA os_HOSTNAME TARGET_IP

Quick heuristics from open ports:

TTL heuristics (from ping or nmap):

Step 4: Output Parsing and State Update

After scanning, parse results into structured form for state management and next-step routing.

Parse nmap XML for structured data:

# List all hosts with open ports (from XML)
xmlstarlet sel -t -m "//host[ports/port/state/@state='open']" \
  -v "address[@addrtype='ipv4']/@addr" -o " " \
  -m "ports/port[state/@state='open']" -v "@portid" -o "/" -v "service/@name" -o " " \
  -b -n scan_HOSTNAME.xml

# Quick summary
grep "Ports:" scan_HOSTNAME.gnmap | sed 's/Ports: //' | tr ',' '\n'

Report scan results in return summary (format per-host one-liner):

## Targets
- 10.10.10.1 | Windows Server 2019 | DC | 53,88,135,139,389,445,636,3268,3389,5985
- 10.10.10.5 | Ubuntu 22.04 | Web | 22,80,443
- 10.10.10.10 | Windows 10 | Workstation | 135,139,445,3389,5985

Troubleshooting

Nmap scan runs slowly or hangs

• Use -T4 for speed. Drop to -T3 if getting rate-limited or missing ports.
• On large subnets, start with --top-ports 1000 before doing -p-.

Host appears down (0 hosts up)

• Retry with -Pn added to the same scan options (see "Host Appears Down" in Step 2). Do NOT change the scan type or port range.
• If -Pn also finds nothing, return to orchestrator — do not improvise.

UDP scan takes too long

• UDP scans are inherently slow. Limit to key ports: -sU -p 53,67,69,123,161,162,500,623,1434,5353.
• Combine with TCP: -sS -sU --top-ports 100.

Service version detection returns "tcpwrapped"

• Target is accepting TCP connections but dropping them before service negotiation.
• Try connecting manually: nc -nv TARGET_IP PORT to see if there's a banner.
• May indicate a firewall or IPS is interfering.

Nmap XML parsing fails

• Ensure scan completed (check for </nmaprun> closing tag).
• If scan was interrupted, partial XML is unusable — re-run with -oA to get all formats.

Nmap through proxychains times out or takes forever

• Never scan an entire /24 with nmap through proxychains. Use the two-phase approach in the Pivot Mode section.
• Use -T3 or -T2 instead of -T4 — aggressive timing causes SOCKS timeouts.
• Add --max-retries 2 --host-timeout 300s to bound individual hosts.
• Scan fewer ports: use a targeted list instead of --top-ports 1000 or -p-.
• If all else fails, upload a static nmap binary to the pivot host and scan locally.