Xmpp Enumeration

XMPP/Jabber Enumeration

You are helping a penetration tester enumerate an XMPP/Jabber service. This skill covers service detection, authentication testing, user enumeration, MUC (Multi-User Chat) room discovery, and server fingerprinting. All testing is under explicit written authorization.

Engagement Logging

Check for ./engagement/ directory. If absent, proceed without logging.

When an engagement directory exists:

• Print [xmpp-enumeration] Activated → <target> to the screen on activation.
• Evidence → save significant output to engagement/evidence/ with descriptive filenames (e.g., xmpp-users.txt, xmpp-rooms.txt, xmpp-server-info.txt).

Scope Boundary

This skill covers XMPP service enumeration only. It does NOT cover:

• AD enumeration or Kerberos attacks — route to ad-discovery
• Credential spraying or brute force — route to password-spraying
• Web application testing (even Openfire admin console) — route to web-discovery
• Exploitation of RCE vulnerabilities in XMPP servers — report and return

When enumeration is complete, STOP and return to the orchestrator with discovered users, rooms, server details, and recommendations for next skills.

Stay in methodology. Only use techniques documented in this skill. If you encounter a scenario not covered here, note it and return — do not improvise attacks, write custom exploit code, or apply techniques from other domains. The orchestrator will provide specific guidance or route to a different skill.

State Management

Call get_state_summary() from the state MCP server to read current engagement state. Use it to:

• Skip re-testing targets, parameters, or vulns already confirmed
• Leverage existing credentials or access for this technique
• Understand what's been tried and failed (check Blocked section)

Your return summary must include:

• New targets/hosts discovered (with ports and services)
• New credentials or tokens found
• Access gained or changed (user, privilege level, method)
• Vulnerabilities confirmed (with status and severity)
• Pivot paths identified (what leads where)
• Blocked items (what failed and why, whether retryable)

Prerequisites

• XMPP port open: 5222 (STARTTLS), 5223 (legacy TLS), or 5269 (S2S)
• python3 — for raw XML socket interaction (no external libraries required)
• nmap — for initial service probing (via MCP nmap-server)
• Optional: slixmpp Python library (if installed, simplifies some steps)

Special characters in credentials

Bash history expansion treats ! as a special character (!event), even inside double quotes. Passwords containing !, $, backticks, or other shell metacharacters will be silently mangled when passed as command arguments.

Canonical workaround — write to file, read from file:

# 1. Use the Write tool (not echo/printf) to create a password file
Write("/tmp/claude-1000/cred.txt", "lDaP_1n_th3_cle4r!")

# 2. Read into a variable
PASS=$(cat /tmp/claude-1000/cred.txt)

# 3. Use the variable in commands (double-quote it)
python3 xmpp_enum.py --password "$PASS"

Step 1: Service Detection

Confirm XMPP service and identify the server software.

1a. Nmap Service Probes

Use the nmap MCP to scan XMPP ports:

nmap_scan(target="<IP>", options="-sV -p 5222,5223,5269,5270,5275,5276,7070,7443,9090,9091 -sC")

Key ports:

1b. TLS Certificate Inspection

Extract hostname and organization from the TLS certificate:

# STARTTLS on 5222
echo | openssl s_client -starttls xmpp -connect <IP>:5222 -servername <domain> 2>/dev/null | openssl x509 -noout -subject -issuer -dates

# Direct TLS on 5223
echo | openssl s_client -connect <IP>:5223 2>/dev/null | openssl x509 -noout -subject -issuer -dates

The certificate CN or SAN fields often reveal the XMPP domain (e.g., chat.corp.local, xmpp.target.local).

1c. Raw XMPP Stream Probe

Send an initial stream header to identify the server and supported features:

#!/usr/bin/env python3
"""XMPP stream probe — identifies server software and SASL mechanisms."""
import socket
import ssl
import sys

TARGET = sys.argv[1]  # IP or hostname
PORT = int(sys.argv[2]) if len(sys.argv) > 2 else 5222
DOMAIN = sys.argv[3] if len(sys.argv) > 3 else TARGET

STREAM_HEADER = f'''<?xml version='1.0'?>
<stream:stream xmlns='jabber:client'
  xmlns:stream='http://etherx.jabber.org/streams'
  to='{DOMAIN}' version='1.0'>'''

def probe(target, port, domain, use_tls=False):
    sock = socket.create_connection((target, port), timeout=10)
    if use_tls:
        ctx = ssl.create_default_context()
        ctx.check_hostname = False
        ctx.verify_mode = ssl.CERT_NONE
        sock = ctx.wrap_socket(sock, server_hostname=domain)

    sock.sendall(STREAM_HEADER.encode())
    data = b""
    while True:
        try:
            chunk = sock.recv(4096)
            if not chunk:
                break
            data += chunk
            # Stop once we have features or stream error
            if b"</stream:features>" in data or b"</stream:error>" in data:
                break
        except socket.timeout:
            break
    sock.close()
    return data.decode(errors="replace")

# Try plain first (STARTTLS), then direct TLS
for use_tls in [False, True]:
    try:
        label = "TLS" if use_tls else "plain"
        print(f"[*] Probing {TARGET}:{PORT} ({label})...")
        resp = probe(TARGET, PORT, DOMAIN, use_tls)
        print(resp)
        break
    except Exception as e:
        print(f"[-] {label} failed: {e}")

What to look for in the response:

• <stream:features> block lists supported authentication mechanisms
• SASL mechanisms: PLAIN, SCRAM-SHA-1, ANONYMOUS, EXTERNAL, DIGEST-MD5
• <register xmlns='http://jabber.org/features/iq-register'/> = in-band registration enabled (XEP-0077)
• Server identification in stream header attributes or error messages

Step 2: Authentication Testing

Test what authentication options are available without credentials.

2a. SASL ANONYMOUS

If ANONYMOUS appears in the SASL mechanisms, the server allows anonymous login — this is a significant finding:

#!/usr/bin/env python3
"""Test SASL ANONYMOUS authentication."""
import socket
import ssl
import base64
import sys

TARGET = sys.argv[1]
PORT = int(sys.argv[2]) if len(sys.argv) > 2 else 5222
DOMAIN = sys.argv[3] if len(sys.argv) > 3 else TARGET

STREAM_HEADER = f'''<?xml version='1.0'?>
<stream:stream xmlns='jabber:client'
  xmlns:stream='http://etherx.jabber.org/streams'
  to='{DOMAIN}' version='1.0'>'''

def recv_until(sock, marker, timeout=10):
    sock.settimeout(timeout)
    data = b""
    while marker.encode() not in data:
        try:
            chunk = sock.recv(4096)
            if not chunk:
                break
            data += chunk
        except socket.timeout:
            break
    return data.decode(errors="replace")

sock = socket.create_connection((TARGET, PORT), timeout=10)

# Start stream
sock.sendall(STREAM_HEADER.encode())
features = recv_until(sock, "</stream:features>")
print("[*] Features:", features[:500])

# Check for STARTTLS and upgrade if available
if "<starttls" in features:
    sock.sendall(b"<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'/>")
    resp = recv_until(sock, "/>")
    if "<proceed" in resp:
        ctx = ssl.create_default_context()
        ctx.check_hostname = False
        ctx.verify_mode = ssl.CERT_NONE
        sock = ctx.wrap_socket(sock, server_hostname=DOMAIN)
        # Restart stream after TLS
        sock.sendall(STREAM_HEADER.encode())
        features = recv_until(sock, "</stream:features>")
        print("[*] Post-TLS features:", features[:500])

if "ANONYMOUS" not in features:
    print("[-] SASL ANONYMOUS not supported")
    sock.close()
    sys.exit(1)

# Authenticate as anonymous
sock.sendall(b"<auth xmlns='urn:ietf:params:xml:ns:xmpp-sasl' mechanism='ANONYMOUS'/>")
resp = recv_until(sock, ">")
print("[*] Auth response:", resp)

if "<success" in resp:
    print("[+] ANONYMOUS authentication succeeded!")
    # Restart stream to get bound JID
    sock.sendall(STREAM_HEADER.encode())
    features = recv_until(sock, "</stream:features>")
    # Bind resource
    sock.sendall(b"<iq type='set' id='bind1'><bind xmlns='urn:ietf:params:xml:ns:xmpp-bind'><resource>enum</resource></bind></iq>")
    resp = recv_until(sock, "</iq>")
    print("[+] Bound JID:", resp)
else:
    print("[-] ANONYMOUS auth failed:", resp)

sock.close()

2b. In-Band Registration (XEP-0077)

If the stream features include <register>, test in-band registration:

#!/usr/bin/env python3
"""Test XEP-0077 in-band registration and register an account."""
import socket
import ssl
import sys

TARGET = sys.argv[1]
PORT = int(sys.argv[2]) if len(sys.argv) > 2 else 5222
DOMAIN = sys.argv[3] if len(sys.argv) > 3 else TARGET
USERNAME = sys.argv[4] if len(sys.argv) > 4 else "testuser123"
PASSWORD = sys.argv[5] if len(sys.argv) > 5 else "TestPass123!"

STREAM_HEADER = f'''<?xml version='1.0'?>
<stream:stream xmlns='jabber:client'
  xmlns:stream='http://etherx.jabber.org/streams'
  to='{DOMAIN}' version='1.0'>'''

def recv_until(sock, marker, timeout=10):
    sock.settimeout(timeout)
    data = b""
    while marker.encode() not in data:
        try:
            chunk = sock.recv(4096)
            if not chunk:
                break
            data += chunk
        except socket.timeout:
            break
    return data.decode(errors="replace")

sock = socket.create_connection((TARGET, PORT), timeout=10)
sock.sendall(STREAM_HEADER.encode())
features = recv_until(sock, "</stream:features>")

# STARTTLS upgrade if available
if "<starttls" in features:
    sock.sendall(b"<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'/>")
    resp = recv_until(sock, "/>")
    if "<proceed" in resp:
        ctx = ssl.create_default_context()
        ctx.check_hostname = False
        ctx.verify_mode = ssl.CERT_NONE
        sock = ctx.wrap_socket(sock, server_hostname=DOMAIN)
        sock.sendall(STREAM_HEADER.encode())
        features = recv_until(sock, "</stream:features>")

# Query registration fields
sock.sendall(f"<iq type='get' id='reg1' to='{DOMAIN}'><query xmlns='jabber:iq:register'/></iq>".encode())
resp = recv_until(sock, "</iq>")
print("[*] Registration fields:", resp)

if "error" in resp.lower() and "not-allowed" in resp.lower():
    print("[-] In-band registration is disabled")
    sock.close()
    sys.exit(1)

# Attempt registration
reg_iq = f'''<iq type='set' id='reg2'>
  <query xmlns='jabber:iq:register'>
    <username>{USERNAME}</username>
    <password>{PASSWORD}</password>
  </query>
</iq>'''
sock.sendall(reg_iq.encode())
resp = recv_until(sock, "</iq>")
print("[*] Registration response:", resp)

if "<error" not in resp:
    print(f"[+] Account registered: {USERNAME}@{DOMAIN}")
elif "conflict" in resp.lower():
    print(f"[!] Username '{USERNAME}' already exists (conflict error)")
    print("[+] This confirms in-band registration is enabled and can be used for user enumeration")
else:
    print(f"[-] Registration failed: {resp}")

sock.close()

If registration succeeds, you now have valid credentials. Report the registered account and proceed to user enumeration with authenticated access.

Step 3: User Enumeration

Enumerate valid usernames on the XMPP server. Multiple techniques available depending on access level.

3a. Registration Conflict Enumeration (Unauthenticated)

If in-band registration is enabled, you can enumerate users by attempting to register known usernames and checking for <conflict/> errors:

#!/usr/bin/env python3
"""Enumerate XMPP users via registration conflict errors."""
import socket
import ssl
import sys
import time

TARGET = sys.argv[1]
PORT = int(sys.argv[2]) if len(sys.argv) > 2 else 5222
DOMAIN = sys.argv[3] if len(sys.argv) > 3 else TARGET
USERFILE = sys.argv[4] if len(sys.argv) > 4 else "/usr/share/seclists/Usernames/xato-net-10-million-usernames-dup.txt"

STREAM_HEADER = f'''<?xml version='1.0'?>
<stream:stream xmlns='jabber:client'
  xmlns:stream='http://etherx.jabber.org/streams'
  to='{DOMAIN}' version='1.0'>'''

def recv_until(sock, marker, timeout=10):
    sock.settimeout(timeout)
    data = b""
    while marker.encode() not in data:
        try:
            chunk = sock.recv(4096)
            if not chunk:
                break
            data += chunk
        except socket.timeout:
            break
    return data.decode(errors="replace")

def connect_and_tls():
    sock = socket.create_connection((TARGET, PORT), timeout=10)
    sock.sendall(STREAM_HEADER.encode())
    features = recv_until(sock, "</stream:features>")
    if "<starttls" in features:
        sock.sendall(b"<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'/>")
        resp = recv_until(sock, "/>")
        if "<proceed" in resp:
            ctx = ssl.create_default_context()
            ctx.check_hostname = False
            ctx.verify_mode = ssl.CERT_NONE
            sock = ctx.wrap_socket(sock, server_hostname=DOMAIN)
            sock.sendall(STREAM_HEADER.encode())
            recv_until(sock, "</stream:features>")
    return sock

found_users = []
with open(USERFILE) as f:
    usernames = [line.strip() for line in f if line.strip()]

print(f"[*] Testing {len(usernames)} usernames against {DOMAIN}")

sock = connect_and_tls()
count = 0

for username in usernames:
    try:
        reg_iq = f'''<iq type='set' id='enum{count}'>
          <query xmlns='jabber:iq:register'>
            <username>{username}</username>
            <password>EnumPass123!</password>
          </query>
        </iq>'''
        sock.sendall(reg_iq.encode())
        resp = recv_until(sock, "</iq>")

        if "conflict" in resp.lower():
            print(f"[+] EXISTS: {username}@{DOMAIN}")
            found_users.append(username)
        elif "<error" not in resp:
            # Account was actually created — also valid info
            print(f"[+] REGISTERED: {username}@{DOMAIN} (new account created)")
            found_users.append(username)

        count += 1
        # Reconnect periodically to avoid stream timeouts
        if count % 100 == 0:
            try:
                sock.close()
            except Exception:
                pass
            sock = connect_and_tls()
            print(f"[*] Progress: {count}/{len(usernames)} tested, {len(found_users)} found")

    except Exception as e:
        print(f"[!] Error on {username}: {e}")
        try:
            sock.close()
        except Exception:
            pass
        sock = connect_and_tls()

sock.close()

print(f"\n[*] Enumeration complete: {len(found_users)}/{len(usernames)} users found")
for u in found_users:
    print(f"  {u}@{DOMAIN}")

Note: This technique registers accounts for non-existent usernames. Use a small, targeted username list (top 1000) rather than a massive wordlist to avoid creating thousands of accounts. If the engagement scope allows it, clean up registered accounts afterward.

3b. Roster/Contact Queries (Authenticated)

With authenticated access (from registration or provided credentials):

#!/usr/bin/env python3
"""Query user roster and service discovery with authenticated XMPP session."""
import socket
import ssl
import base64
import sys

TARGET = sys.argv[1]
PORT = int(sys.argv[2]) if len(sys.argv) > 2 else 5222
DOMAIN = sys.argv[3] if len(sys.argv) > 3 else TARGET
USERNAME = sys.argv[4]
PASSWORD = sys.argv[5]

STREAM_HEADER = f'''<?xml version='1.0'?>
<stream:stream xmlns='jabber:client'
  xmlns:stream='http://etherx.jabber.org/streams'
  to='{DOMAIN}' version='1.0'>'''

def recv_until(sock, marker, timeout=10):
    sock.settimeout(timeout)
    data = b""
    while marker.encode() not in data:
        try:
            chunk = sock.recv(4096)
            if not chunk:
                break
            data += chunk
        except socket.timeout:
            break
    return data.decode(errors="replace")

sock = socket.create_connection((TARGET, PORT), timeout=10)
sock.sendall(STREAM_HEADER.encode())
features = recv_until(sock, "</stream:features>")

# STARTTLS
if "<starttls" in features:
    sock.sendall(b"<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'/>")
    resp = recv_until(sock, "/>")
    if "<proceed" in resp:
        ctx = ssl.create_default_context()
        ctx.check_hostname = False
        ctx.verify_mode = ssl.CERT_NONE
        sock = ctx.wrap_socket(sock, server_hostname=DOMAIN)
        sock.sendall(STREAM_HEADER.encode())
        features = recv_until(sock, "</stream:features>")

# SASL PLAIN authentication
auth_str = f"\x00{USERNAME}\x00{PASSWORD}"
auth_b64 = base64.b64encode(auth_str.encode()).decode()
sock.sendall(f"<auth xmlns='urn:ietf:params:xml:ns:xmpp-sasl' mechanism='PLAIN'>{auth_b64}</auth>".encode())
resp = recv_until(sock, ">")

if "<success" not in resp:
    print(f"[-] Authentication failed: {resp}")
    sock.close()
    sys.exit(1)

print(f"[+] Authenticated as {USERNAME}@{DOMAIN}")

# Restart stream post-auth
sock.sendall(STREAM_HEADER.encode())
features = recv_until(sock, "</stream:features>")

# Bind resource
sock.sendall(b"<iq type='set' id='bind1'><bind xmlns='urn:ietf:params:xml:ns:xmpp-bind'><resource>enum</resource></bind></iq>")
resp = recv_until(sock, "</iq>")
print(f"[*] Bound: {resp}")

# Query roster
sock.sendall(b"<iq type='get' id='roster1'><query xmlns='jabber:iq:roster'/></iq>")
resp = recv_until(sock, "</iq>")
print(f"[*] Roster:\n{resp}")

# Service discovery — discover server items (MUC, users directory, etc.)
sock.sendall(f"<iq type='get' id='disco1' to='{DOMAIN}'><query xmlns='http://jabber.org/protocol/disco#items'/></iq>".encode())
resp = recv_until(sock, "</iq>")
print(f"[*] Server items:\n{resp}")

# Service discovery — server info
sock.sendall(f"<iq type='get' id='disco2' to='{DOMAIN}'><query xmlns='http://jabber.org/protocol/disco#info'/></iq>".encode())
resp = recv_until(sock, "</iq>")
print(f"[*] Server info:\n{resp}")

# Search for users directory (XEP-0055)
sock.sendall(f"<iq type='get' id='search1' to='search.{DOMAIN}'><query xmlns='jabber:iq:search'/></iq>".encode())
resp = recv_until(sock, "</iq>")
print(f"[*] User search service:\n{resp}")

# If search service exists, search for all users (wildcard)
if "error" not in resp.lower():
    sock.sendall(f'''<iq type='set' id='search2' to='search.{DOMAIN}'>
      <query xmlns='jabber:iq:search'>
        <x xmlns='jabber:x:data' type='submit'>
          <field var='FORM_TYPE' type='hidden'><value>jabber:iq:search</value></field>
          <field var='search'><value>*</value></field>
          <field var='Username'><value>1</value></field>
          <field var='Name'><value>1</value></field>
          <field var='Email'><value>1</value></field>
        </x>
      </query>
    </iq>'''.encode())
    resp = recv_until(sock, "</iq>", timeout=30)
    print(f"[*] User search results:\n{resp}")

sock.close()

Large user directories: If the search returns hundreds or thousands of users, save the full output to engagement/evidence/xmpp-users.txt and extract usernames for further use:

# Extract usernames from search results (adapt grep pattern to output format)
grep -oP 'value>\K[^<]+' engagement/evidence/xmpp-users.txt | sort -u > engagement/evidence/xmpp-usernames.txt

Step 4: MUC Room Discovery

Discover Multi-User Chat rooms and check for accessible rooms with message history.

#!/usr/bin/env python3
"""Discover MUC rooms and retrieve history from open rooms."""
import socket
import ssl
import base64
import sys
import re

TARGET = sys.argv[1]
PORT = int(sys.argv[2]) if len(sys.argv) > 2 else 5222
DOMAIN = sys.argv[3] if len(sys.argv) > 3 else TARGET
USERNAME = sys.argv[4]
PASSWORD = sys.argv[5]
MUC_SERVICE = sys.argv[6] if len(sys.argv) > 6 else f"conference.{DOMAIN}"

STREAM_HEADER = f'''<?xml version='1.0'?>
<stream:stream xmlns='jabber:client'
  xmlns:stream='http://etherx.jabber.org/streams'
  to='{DOMAIN}' version='1.0'>'''

def recv_until(sock, marker, timeout=10):
    sock.settimeout(timeout)
    data = b""
    while marker.encode() not in data:
        try:
            chunk = sock.recv(4096)
            if not chunk:
                break
            data += chunk
        except socket.timeout:
            break
    return data.decode(errors="replace")

# Connect + TLS + Auth (same pattern as Step 3b)
sock = socket.create_connection((TARGET, PORT), timeout=10)
sock.sendall(STREAM_HEADER.encode())
features = recv_until(sock, "</stream:features>")

if "<starttls" in features:
    sock.sendall(b"<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'/>")
    resp = recv_until(sock, "/>")
    if "<proceed" in resp:
        ctx = ssl.create_default_context()
        ctx.check_hostname = False
        ctx.verify_mode = ssl.CERT_NONE
        sock = ctx.wrap_socket(sock, server_hostname=DOMAIN)
        sock.sendall(STREAM_HEADER.encode())
        features = recv_until(sock, "</stream:features>")

auth_str = f"\x00{USERNAME}\x00{PASSWORD}"
auth_b64 = base64.b64encode(auth_str.encode()).decode()
sock.sendall(f"<auth xmlns='urn:ietf:params:xml:ns:xmpp-sasl' mechanism='PLAIN'>{auth_b64}</auth>".encode())
resp = recv_until(sock, ">")
if "<success" not in resp:
    print(f"[-] Auth failed: {resp}")
    sys.exit(1)

sock.sendall(STREAM_HEADER.encode())
recv_until(sock, "</stream:features>")
sock.sendall(b"<iq type='set' id='bind1'><bind xmlns='urn:ietf:params:xml:ns:xmpp-bind'><resource>enum</resource></bind></iq>")
recv_until(sock, "</iq>")

print(f"[+] Authenticated as {USERNAME}@{DOMAIN}")

# Discover MUC rooms
sock.sendall(f"<iq type='get' id='muc1' to='{MUC_SERVICE}'><query xmlns='http://jabber.org/protocol/disco#items'/></iq>".encode())
resp = recv_until(sock, "</iq>", timeout=15)
print(f"[*] MUC rooms:\n{resp}")

# Extract room JIDs
rooms = re.findall(r"jid='([^']+)'", resp)
if not rooms:
    rooms = re.findall(r'jid="([^"]+)"', resp)

print(f"\n[*] Found {len(rooms)} rooms")

# Try to join each room and read history
for room in rooms[:20]:  # Limit to first 20 rooms
    print(f"\n[*] Joining {room}...")
    # Join with history request
    join = f'''<presence to='{room}/{USERNAME}'>
      <x xmlns='http://jabber.org/protocol/muc'>
        <history maxstanzas='50'/>
      </x>
    </presence>'''
    sock.sendall(join.encode())

    # Read messages (may include history)
    resp = recv_until(sock, "</presence>", timeout=5)
    # Also read any message history
    try:
        sock.settimeout(3)
        extra = sock.recv(65536).decode(errors="replace")
        resp += extra
    except socket.timeout:
        pass

    if "not-allowed" in resp or "forbidden" in resp:
        print(f"  [-] Access denied to {room}")
    else:
        msg_count = resp.count("<message")
        print(f"  [+] Joined {room} — {msg_count} messages in history")
        if msg_count > 0:
            print(f"  [!] Room has readable history — save to evidence")

    # Leave room
    sock.sendall(f"<presence to='{room}/{USERNAME}' type='unavailable'/>".encode())
    recv_until(sock, ">", timeout=3)

sock.close()

Interesting findings in MUC rooms:

• Credentials shared in chat messages (passwords, tokens, API keys)
• Internal hostnames, IP addresses, and infrastructure details
• Employee names mapping to AD usernames
• Application URLs, deployment details, internal documentation links

Save any interesting room history to engagement/evidence/xmpp-room-<name>.txt.

Step 5: Information Gathering

5a. Server Version and Plugins

With authenticated access, query the server for detailed information:

# Query server version (XEP-0092)
sock.sendall(f"<iq type='get' id='ver1' to='{DOMAIN}'><query xmlns='jabber:iq:version'/></iq>".encode())
resp = recv_until(sock, "</iq>")
print(f"[*] Server version: {resp}")

# Query server uptime/stats (admin feature, may be restricted)
sock.sendall(f"<iq type='get' id='stats1' to='{DOMAIN}'><query xmlns='http://jabber.org/protocol/stats'/></iq>".encode())
resp = recv_until(sock, "</iq>")
print(f"[*] Server stats: {resp}")

5b. Known Vulnerabilities by Server Version

If the server version matches a known vulnerable version, report it and return — do not attempt exploitation. The orchestrator will route to the appropriate technique skill.

5c. Admin Interface Detection

Openfire exposes admin consoles on separate ports:

• HTTP: http://<target>:9090
• HTTPS: https://<target>:9091

If these ports were found in the nmap scan, note them for web-discovery. Do not test the web admin interface from this skill.

Troubleshooting

Connection refused on 5222

• Server may only listen on 5223 (legacy TLS) — try direct TLS connection
• Check if a firewall is blocking — try from a different source IP
• Server may use non-standard ports — check nmap results for XMPP on other ports

STARTTLS fails

• Try direct TLS connection on port 5223
• Server may not support TLS — try plain connection (not recommended for auth)
• Certificate hostname mismatch — use -servername flag with openssl

Registration returns "not-allowed"

• In-band registration is disabled (server policy)
• Try SASL ANONYMOUS as an alternative for unauthenticated access
• Report finding and return — user enumeration requires credentials

Stream error: host-unknown

• Wrong domain in stream header — use the domain from TLS certificate or nmap
• Try variations: chat.corp.local, jabber.corp.local, xmpp.corp.local
• Check DNS/hosts file for the correct hostname mapping

Python socket timeout

• Increase timeout values in the scripts (default 10s may be too short)
• Server may be rate-limiting — add delays between requests
• Network latency — try direct TLS (5223) which skips the STARTTLS handshake

Large user directories (>1000 users)

• The search query may return paginated results — check for result set management
• Save output in chunks to avoid memory issues
• Focus on usernames that match AD naming patterns (first.last, flast, etc.)