Causal Inference

Causal Inference

Reference for implementing causal inference methods: from identification strategy to estimation to diagnostics and robustness. Covers the major quasi-experimental and observational methods used in applied economics and quantitative social science.

When to Use This Skill

Use when the user is:

• Choosing an identification strategy for a causal question
• Implementing IV/2SLS, DiD, RDD, synthetic control, or matching
• Debugging specification issues (weak instruments, parallel trends violations, bandwidth sensitivity)
• Running robustness checks or falsification tests
• Working with modern DiD methods for staggered treatment timing

Skip when:

• The task is structural estimation (use structural-modeling skill)
• The task is pure prediction/ML (no causal question)
• The user needs simulation design (use numerical-auditor agent)

Where to Start

• Choosing a method? Jump to Method Selection Guide at the end
• Implementing a specific method? Go directly to that method's section below
• Need full code? See references/method-implementations.md for complete implementations

Frameworks

Two complementary frameworks underpin all causal inference:

Potential Outcomes (Rubin): Define Y(1), Y(0) as potential outcomes under treatment and control. The causal effect is τ = Y(1) - Y(0). The fundamental problem: we never observe both for the same unit. All methods are strategies for constructing valid counterfactuals.

DAGs (Pearl): Graphical models encoding conditional independence assumptions. Use d-separation to determine what must be conditioned on (and what must NOT be conditioned on) to identify causal effects. Particularly useful for reasoning about bad controls (colliders, mediators), overcontrol bias, and which instruments satisfy the exclusion restriction.

Quick Reference: Methods at a Glance

Target Parameters

Be precise about what parameter you are estimating:

Common mistake: IV estimates LATE, not ATE. DiD estimates ATT, not ATE. This matters for policy interpretation.

Instrumental Variables (IV/2SLS)

Key idea: Find a variable Z that shifts D (first stage) but affects Y only through D (exclusion restriction).

from linearmodels.iv import IV2SLS

result = IV2SLS.from_formula(
    'lwage ~ 1 + exper + expersq + [educ ~ nearc4 + nearc2]',
    data=df
).fit(cov_type='robust')

# Always check first-stage F > 10; report LIML as robustness with weak instruments

For R/Stata implementations, weak instrument corrections (LIML, Anderson-Rubin), and overidentification tests, see references/method-implementations.md.

IV Diagnostics Checklist:

• First-stage F > 10 (or Olea-Pflueger effective F for robust inference)
• Exclusion restriction argued substantively (not testable)
• Monotonicity for LATE interpretation (no defiers)
• Reduced form significant (regress Y directly on Z)
• Overidentification test reported if over-identified
• Compare OLS vs 2SLS — direction and magnitude as expected?
• Report LATE interpretation — who are the compliers?

Difference-in-Differences (DiD)

Key idea: Compare changes over time between treated and control groups, assuming they would have followed parallel trends absent treatment.

import statsmodels.formula.api as smf

# Standard 2x2 DiD
result = smf.ols('y ~ treated + post + treated:post', data=df).fit(
    cov_type='cluster', cov_kwds={'groups': df['state']}
)
# Coefficient on treated:post is the DiD estimate

Staggered treatment timing: With staggered adoption, TWFE can produce sign-reversed estimates due to negative weights. Use:

• Callaway-Sant'Anna (did R package): Most flexible aggregation, doubly robust
• Sun-Abraham (fixest::sunab): Integrates directly into feols; simpler for event studies
• Bacon decomposition (bacondecomp R): Diagnose how much weight TWFE puts on contaminated comparisons

For full staggered DiD code (C-SA, Sun-Abraham, BJS24, de Chaisemartin-D'H), see references/staggered-did.md. For event study code and HonestDiD pre-trend sensitivity, see references/method-implementations.md.

DiD Diagnostics Checklist:

• Pre-trends: Event study shows no significant pre-treatment coefficients
• Parallel trends sensitivity: Rambachan-Roth or similar analysis
• Staggered timing: If varies, use C-SA or S-A — NOT naive TWFE
• Clustering at level of treatment assignment (typically state/county)
• Anticipation: Check period just before treatment
• Bacon decomposition if using TWFE

Regression Discontinuity (RDD)

Key idea: Units just above and below a threshold are locally comparable; the jump at the threshold identifies the causal effect.

from rdrobust import rdrobust, rdbwselect, rdplot

# Basic sharp RD with bias-corrected robust CI
result = rdrobust(y=df['outcome'], x=df['running_var'], c=0)
# Reports: point estimate, robust CI, MSE-optimal bandwidth, N left/right

# Density test for manipulation
from rddensity import rddensity
density_test = rddensity(X=df['running_var'], c=0)

For fuzzy RDD, bandwidth sensitivity tables, and R/Stata implementations, see references/method-implementations.md.

RDD Diagnostics Checklist:

• McCrary density test: No manipulation of running variable at cutoff
• Covariate balance: Run RD on predetermined covariates as placebo outcomes
• Bandwidth sensitivity: Results stable across 0.5×, 0.75×, 1×, 1.5×, 2× optimal
• Local linear (p=1) is standard — avoid high-order polynomials
• Donut hole: Drop observations very close to cutoff
• Placebo cutoffs: Run RD where no effect should exist

Synthetic Control

When to use: Single or very few treated units, long pre-treatment series, no obvious comparison group. SC constructs a synthetic counterfactual as a weighted average of donor units.

Key packages: R: Synth, tidysynth, augsynth; Python: SparseSC, SyntheticControlMethods

Diagnostics: Pre-treatment RMSPE (fit quality), permutation/placebo tests across donor units, leave-one-out stability, time placebo at earlier date.

For full implementation (Synth setup, augsynth, permutation tests), see references/synthetic-control.md and references/method-implementations.md. The identification-critic agent can evaluate SC identification assumptions.

Matching and Weighting

Key idea: Reweight control group to match treated group on observed characteristics. Only valid under selection-on-observables (no unobserved confounders).

AIPW (doubly robust) is the recommended default — consistent if either the propensity score model or the outcome model is correctly specified.

from econml.dr import LinearDRLearner
from sklearn.ensemble import GradientBoostingRegressor, GradientBoostingClassifier

# Doubly robust learner
dr = LinearDRLearner(
    model_regression=GradientBoostingRegressor(),
    model_propensity=GradientBoostingClassifier()
)
dr.fit(Y=df['y'], T=df['treatment'], X=df[covariates], W=None)
ate = dr.ate(df[covariates])

For propensity score estimation, IPW/Hajek estimators, and manual AIPW implementation, see references/method-implementations.md.

Matching Diagnostics Checklist:

• Covariate balance: Standardized mean differences < 0.1 after weighting
• Common support: Substantial overlap in propensity score distributions
• Sensitivity analysis: Rosenbaum bounds
• No post-treatment covariates in the propensity model
• Trim if propensity scores near 0 or 1

Method Selection Guide

Decision heuristic:

1. Is there a sharp threshold? → RDD
2. Is there an instrument? → IV
3. Is there a clean pre/post + treated/control? → DiD
4. Only one treated unit? → Synthetic control
5. Rich observables, selection on observables plausible? → AIPW
6. None of the above → structural model may be needed

Common Anti-Patterns

Integration with compound-science

• econometric-reviewer — Reviews identification strategy, standard errors, and asymptotic properties
• identification-critic — Evaluates exclusion restrictions, support conditions, and identification completeness
• identification-critic agent / identification-proofs skill — Formalize an identification argument end-to-end
• /estimate — Run a full estimation pipeline with diagnostics
• empirical-playbook skill (sensitivity-analysis.md) — Oster bounds, specification curve, breakdown frontier for robustness

Additional References

• references/method-implementations.md — Full IV/2SLS, DiD event study, RDD, and matching/AIPW implementation code
• references/staggered-did.md — Full implementation code for Callaway-Sant'Anna, Sun-Abraham, BJS24, de Chaisemartin-D'Haultfoeuille, and Bacon decomposition
• references/synthetic-control.md — Standard SC optimizer, permutation/placebo test code, augmented SC, diagnostics checklist