Mobicom Experiments

MobiCom Experiments

MobiCom's evidence culture is physical: a mobile/wireless mechanism is believed when it is measured over the air, on real hardware, under conditions that resemble deployment. A simulation-only or single-run evaluation reads as under-done here. Design the evaluation as a set of questions about the mechanism, then build the smallest measurement campaign that answers them on real radios.

Questions before measurements

Write the evaluation's subsection titles as questions first — Does the mechanism hold under mobility? What does it cost in energy at rest? When does the channel defeat it? — then design one experiment per question. The inverted approach (run everything, narrate the survivors) produces the benchmark tour that MobiCom reviews call unfocused.

A minimal matrix for a wireless-mechanism paper:

Measurement methodology reviewers check

• State the RF setup completely: radio/SDR model and firmware, carrier frequency, bandwidth, transmit power, antenna and gain, and receiver chain. A number without its radio context is not interpretable.
• Name the channel condition: distance, line-of-sight vs multipath, ambient interference, and how you characterized it (RSSI/CSI traces, coherence time). Do not let "in our lab" stand in for a channel description.
• Make mobility explicit: walker paths, speeds, and schedules for mobility experiments, and a stationary control. "Under mobility" without the traces is unverifiable.
• Report ground-truth honestly: how position, gesture, or decode-correctness truth was obtained, and its own error, since a sensing result is only as good as its reference.

Energy is a first-class metric

Battery and harvested-energy claims are common at MobiCom and are held to instrument-level scrutiny:

Energy report checklist:
  instrument: power monitor / shunt + DAQ, sampling rate
  quantity: energy-per-bit or per-operation, not just average power
  boundary: what is inside the measured envelope (radio only? whole tag?)
  budget: for harvested/batteryless designs, the source and the duty cycle

An energy claim that cannot be re-derived from a described measurement setup should not survive your own audit.

Baselines on tuned hardware

• Compare against the incumbent people actually run, configured the way its own documentation prescribes — an untuned baseline is the most common credibility wound in systems and wireless reviewing.
• Include the do-less baseline: the trivial fix (more power, a fixed high rate, another antenna). If the mechanism cannot beat it at equal cost, that is the finding.
• When a competitor cannot be run (proprietary radio, unavailable hardware), reimplement and label it a reimplementation, or compare on published numbers with the configuration deltas stated.

Distributions, not superlatives

• Report percentiles and confidence intervals for delivery, latency, and throughput claims; a single "up to N×" without the distribution behind it is a review risk (mobicom-writing-style).
• Show CDFs for headline results and repeat runs across enough channel realizations, days, or walker paths to expose run-to-run spread; state what varies between repeats.
• Wireless results are time- and place-dependent — a result from one room at one hour is not a claim about the mechanism until the spread is characterized.

Audit checklist

• Every evaluation subsection answers a named question.
• RF setup, channel condition, and mobility fully specified per experiment.
• Energy measured with a described instrument and boundary, not estimated.
• Incumbent-grade baseline present and tuned; do-less baseline present.
• Percentiles + distributions for headline metrics; multi-run spread reported.
• At least one condition the mechanism does not win, discussed rather than buried.
• Numbers in abstract/intro regenerate from the recorded runs.
• A hardware-optional or downscaled variant exists for artifact evaluators (mobicom-artifact-evaluation).

Output format

[Evidence form] over-the-air testbed / deployment / trace / simulation (claimed vs actual)
[Question map] question -> experiment -> metric (gaps flagged)
[RF+channel] setup and conditions specified? y/n per headline experiment
[Energy] measured, with instrument and boundary? y/n
[Baseline audit] incumbent tuned? do-less present?
[Break condition] regime where the mechanism loses: <named or MISSING>
[Priority additions] ordered by review-risk reduction per testbed-week