Tables & Figures (pom-tables-figures)
When to trigger
- Exhibits are cluttered, off house style, or not self-explanatory
- You are over the 32-page cap and must decide what moves to the e-companion
- A reviewer cannot follow the contribution from the table/figure sequence
The POM exhibit budget: main paper vs. e-companion
POM's 32-page limit counts tables, figures, appendices, and references (1.5 spacing, 11-pt). Treat exhibits as a scarce budget: only the displays that carry the core operational insight belong in the main paper; full proofs, large parameter grids, extended robustness, and supplementary tables go to the unlimited online e-companion. Number e-companion exhibits distinctly (e.g., EC.1, Table EC.2) and cross-reference them stably from the main text.
Match the exhibit to the method track
- Analytical/modeling: a model schematic (decision timeline, information structure); a comparative-statics or sensitivity figure showing how the optimal policy moves with cost, lead time, or competition; a table of structural results. Lead with the managerial reading of the curve, not just its monotonicity.
- Empirical OM: a descriptive/summary table; the main results table with effect sizes and standard errors; robustness columns. Put units in decision-relevant terms (cost, fill rate, days).
- Behavioral OM: treatment-by-condition means with error bars; manipulation-check evidence.
- Operations data science: validation/performance tables plus a figure showing the operational gain (e.g., cost or service improvement from predict-then-optimize), not just accuracy.
- Simulation: plots with confidence intervals across sensitivity ranges.
Make every exhibit decision-legible
- Title and note each exhibit with its decision implication, not only the statistical or mathematical object.
- State operational units explicitly.
- Ensure a Department Editor can grasp the contribution from the first one or two exhibits.
- Avoid duplicating main-paper content in appendices or the e-companion.
Execution bridge (StatsPAI / Stata MCP)
Generate exhibits from the fitted result, not by retyping numbers (the usual source of
body-vs-appendix drift). Full map: execution-with-mcp. POM spans analytical and empirical OM; apply the chain below to its empirical-OM papers, and note when a contribution is analytical / optimization.
- Tables:
etable (multi-model columns) or did_summary_to_latex straight from the
result_id.
- Figures:
plot_from_result / enhanced_event_study_plot / event_study_table —
axis units and the SE/clustering note baked in.
- Every note names the estimator + clustering and states the effect size in
interpretable units.
See a full fitted-result → exhibit chain in the JF execution walkthrough.
Checklist
Exhibit pass for Production and Operations Management
Treat this skill as an executable review pass, not a prose hint. First lock the operational decision, the performance metric, and the implementable lever; then judge whether the current manuscript answers the venue's real reader: POM reviewers who want operational insight tied to production, service, supply-chain, or platform decisions.
- Do the pass: For every table or figure, state the estimand or object, sample or case base, uncertainty display, and one sentence the exhibit proves for the venue audience.
- Return a ledger: give
claim / evidence / risk / manuscript location rows, so the next agent can edit rather than rediscover the issue.
- Sibling guard: compare against Management Science for broader OR/MS theory, Operations Research for method-first optimization, MSOM for manufacturing/service operations depth; if a sibling owns the contribution, recommend re-routing before polishing format.
- Stop condition: do not give submission-ready advice until the pack's
resources/official-source-map.md has been checked for volatile rules and the manuscript has one concrete fix for the largest venue-specific risk.
Output format
【Exhibit】table / figure / schematic / appendix item
【Purpose】mechanism / result / robustness / implication / method detail
【Placement】main paper / e-companion (EC.*)
【Problem】readability / page budget / missing units
【Revision】specific design change
【Next step】pom-writing-style
1---2name: pom-tables-figures3description: Use when designing the exhibits for a Production and Operations Management (POM) manuscript — result tables, comparative-statics and sensitivity plots, model schematics, empirical tables, simulation plots — and deciding what stays in the 32-page main paper vs. the online e-companion. Designs exhibits; it does not run the analysis (pom-data-analysis).4metadata:5 source: https://skillmd.com/skills/brycewang-stanford/pom-tables-figures6---78# Tables & Figures (pom-tables-figures)910## When to trigger1112- Exhibits are cluttered, off house style, or not self-explanatory13- You are over the 32-page cap and must decide what moves to the e-companion14- A reviewer cannot follow the contribution from the table/figure sequence1516## The POM exhibit budget: main paper vs. e-companion1718POM's **32-page** limit *counts* tables, figures, appendices, and references (1.5 spacing, 11-pt). Treat exhibits as a scarce budget: only the displays that carry the core operational insight belong in the main paper; full proofs, large parameter grids, extended robustness, and supplementary tables go to the **unlimited online e-companion**. Number e-companion exhibits distinctly (e.g., EC.1, Table EC.2) and cross-reference them stably from the main text.1920## Match the exhibit to the method track2122- **Analytical/modeling:** a model schematic (decision timeline, information structure); a comparative-statics or sensitivity figure showing how the optimal policy moves with cost, lead time, or competition; a table of structural results. Lead with the *managerial* reading of the curve, not just its monotonicity.23- **Empirical OM:** a descriptive/summary table; the main results table with effect sizes and standard errors; robustness columns. Put units in decision-relevant terms (cost, fill rate, days).24- **Behavioral OM:** treatment-by-condition means with error bars; manipulation-check evidence.25- **Operations data science:** validation/performance tables plus a figure showing the **operational gain** (e.g., cost or service improvement from predict-then-optimize), not just accuracy.26- **Simulation:** plots with confidence intervals across sensitivity ranges.2728## Make every exhibit decision-legible2930- Title and note each exhibit with its **decision implication**, not only the statistical or mathematical object.31- State operational units explicitly.32- Ensure a Department Editor can grasp the contribution from the first one or two exhibits.33- Avoid duplicating main-paper content in appendices or the e-companion.3435## Execution bridge (StatsPAI / Stata MCP)3637Generate exhibits from the fitted result, not by retyping numbers (the usual source of38body-vs-appendix drift). Full map: [`execution-with-mcp`](../../../shared-resources/empirical-methods/execution-with-mcp.md). POM spans analytical and empirical OM; apply the chain below to its empirical-OM papers, and note when a contribution is analytical / optimization.3940- **Tables:** `etable` (multi-model columns) or `did_summary_to_latex` straight from the41 `result_id`.42- **Figures:** `plot_from_result` / `enhanced_event_study_plot` / `event_study_table` —43 axis units and the SE/clustering note baked in.44- **Every note** names the estimator + clustering and states the effect size in45 interpretable units.4647See a full fitted-result → exhibit chain in the [JF execution walkthrough](../../../Journal-of-Finance-Skills/resources/worked-examples/02-execution-walkthrough.md).48## Checklist4950- [ ] Core insight exhibits in the main paper; depth in the e-companion51- [ ] Exhibits counted against the 32-page budget52- [ ] Operational units and decision implications labeled53- [ ] E-companion exhibits numbered (EC.*) and cross-referenced stably54- [ ] No duplication between main paper, appendix, and e-companion555657## Exhibit pass for Production and Operations Management5859Treat this skill as an executable review pass, not a prose hint. First lock the operational decision, the performance metric, and the implementable lever; then judge whether the current manuscript answers the venue's real reader: POM reviewers who want operational insight tied to production, service, supply-chain, or platform decisions.6061- **Do the pass:** For every table or figure, state the estimand or object, sample or case base, uncertainty display, and one sentence the exhibit proves for the venue audience.62- **Return a ledger:** give `claim / evidence / risk / manuscript location` rows, so the next agent can edit rather than rediscover the issue.63- **Sibling guard:** compare against Management Science for broader OR/MS theory, Operations Research for method-first optimization, MSOM for manufacturing/service operations depth; if a sibling owns the contribution, recommend re-routing before polishing format.64- **Stop condition:** do not give submission-ready advice until the pack's `resources/official-source-map.md` has been checked for volatile rules and the manuscript has one concrete fix for the largest venue-specific risk.6566## Output format6768```69【Exhibit】table / figure / schematic / appendix item70【Purpose】mechanism / result / robustness / implication / method detail71【Placement】main paper / e-companion (EC.*)72【Problem】readability / page budget / missing units73【Revision】specific design change74【Next step】pom-writing-style75```