Stata

Stata Skill

You have access to comprehensive Stata reference files. Do not load all files. Read only the 1-3 files relevant to the user's current task using the routing table below.

Critical Gotchas

These are Stata-specific pitfalls that lead to silent bugs. Internalize these before writing any code.

Missing Values Sort to +Infinity

Stata's . (and .a-.z) are greater than all numbers.

* WRONG — includes observations where income is missing!
gen high_income = (income > 50000)

* RIGHT
gen high_income = (income > 50000) if !missing(income)

* WRONG — missing ages appear in this list
list if age > 60

* RIGHT
list if age > 60 & !missing(age)

= vs ==

= is assignment; == is comparison. Mixing them up is a syntax error or silent bug.

* WRONG — syntax error
gen employed = 1 if status = 1

* RIGHT
gen employed = 1 if status == 1

Local Macro Syntax

Locals use `name' (backtick + single-quote). Globals use $name or ${name}. Forgetting the closing quote is the #1 macro bug.

local controls "age education income"
regress wage `controls'        // correct
regress wage `controls         // WRONG — missing closing quote
regress wage 'controls'        // WRONG — wrong quote characters

by Requires Prior Sort (Use bysort)

* WRONG — error if data not sorted by id
by id: gen first = (_n == 1)

* RIGHT — bysort sorts automatically
bysort id: gen first = (_n == 1)

* Also RIGHT — explicit sort
sort id
by id: gen first = (_n == 1)

Factor Variable Notation (i. and c.)

Use i. for categorical, c. for continuous. Omitting i. treats categories as continuous.

* WRONG — treats race as continuous (e.g., race=3 has 3x effect of race=1)
regress wage race education

* RIGHT — creates dummies automatically
regress wage i.race education

* Interactions
regress wage i.race##c.education    // full interaction
regress wage i.race#c.education     // interaction only (no main effects)

generate vs replace

generate creates new variables; replace modifies existing ones. Using generate on an existing variable name is an error.

gen x = 1
gen x = 2          // ERROR: x already defined
replace x = 2      // correct

String Comparison Is Case-Sensitive

* May miss "Male", "MALE", etc.
keep if gender == "male"

* Safer
keep if lower(gender) == "male"

merge Always Check _merge

Never skip tab _merge — it costs nothing and is the only diagnostic you get when assert fails.

merge 1:1 id using other.dta
tab _merge                      // ALWAYS tab before assert
assert _merge == 3              // fails silently without tab output
drop _merge

preserve / restore + tempfile for Collapse-Merge-Back

The standard pattern for computing group stats and merging them onto the original data:

tempfile stats
preserve
collapse (mean) avg_x=x, by(group)
save `stats'
restore
merge m:1 group using `stats'
tab _merge
assert _merge == 3
drop _merge

For simple group means, bysort group: egen avg_x = mean(x) avoids the round-trip entirely.

Weights Are Not Interchangeable

• fweight — frequency weights (replication)
• aweight — analytic/regression weights (inverse variance)
• pweight — probability/sampling weights (survey data, implies robust SE)
• iweight — importance weights (rarely used)

capture Swallows Errors

capture some_command
if _rc != 0 {
    di as error "Failed with code: " _rc
    exit _rc
}

Line Continuation Uses ///

regress y x1 x2 x3 ///
    x4 x5 x6, ///
    vce(robust)

Stored Results: r() vs e() vs s()

• r() — r-class commands (summarize, tabulate, etc.)
• e() — e-class commands (estimation: regress, logit, etc.)
• s() — s-class commands (parsing)

A new estimation command overwrites previous e() results. Store them first:

regress y x1 x2
estimates store model1

Running Stata from the Command Line

Claude can execute Stata code by running .do files in batch mode from the terminal. This is how to run Stata non-interactively.

Finding the Stata Binary

Stata on macOS is a .app bundle. The actual binary is inside it. Common locations:

# Stata 18 / StataNow (most common)
/Applications/Stata/StataMP.app/Contents/MacOS/stata-mp
/Applications/StataNow/StataMP.app/Contents/MacOS/stata-mp

# Other editions (SE, BE)
/Applications/Stata/StataSE.app/Contents/MacOS/stata-se
/Applications/Stata/StataBE.app/Contents/MacOS/stata-be

If Stata isn't on $PATH, find it with: mdfind -name "stata-mp" | grep MacOS

Batch Mode (-b)

# Run a .do file in batch mode — output goes to <filename>.log
/Applications/Stata/StataMP.app/Contents/MacOS/stata-mp -b do analysis.do

# If stata-mp is on PATH (e.g., via symlink or alias):
stata-mp -b do analysis.do

• -b = batch mode (non-interactive, no GUI)
• Output (everything Stata would display) is written to analysis.log in the working directory
• Exit code is 0 on success, non-zero on error
• The log file contains all output, including error messages — check it after execution

Running Inline Stata Code

To run a quick Stata snippet without creating a .do file:

# Write a temp .do file and run it
cat > /tmp/stata_run.do << 'EOF'
sysuse auto, clear
summarize price mpg
EOF
stata-mp -b do /tmp/stata_run.do
cat /tmp/stata_run.log

Checking Results

# Check if it succeeded
stata-mp -b do tests/run_tests.do && echo "SUCCESS" || echo "FAILED"

# Search the log for pass/fail
grep -E "PASS|FAIL|error|r\([0-9]+\)" run_tests.log

Tips

• clear all at the top of batch scripts — batch mode starts with a fresh Stata session, but clear all ensures no stale state from prior runs in the same session.
• set more off — prevents Stata from pausing for --more-- prompts (fatal in batch mode).
• Log files overwrite silently — analysis.do always writes to analysis.log in the current directory. If you run multiple .do files, check the right log.
• Working directory — Stata's working directory is wherever you run the command from, not where the .do file lives. Use cd in the .do file or absolute paths if needed.

Routing Table

Read only the files relevant to the user's task. Paths are relative to this SKILL.md file.

Data Operations

Statistics & Econometrics

Causal Inference

Advanced Methods

Graphics

Programming

Output & Workflow

Community Packages

Common Patterns

Regression Table Workflow

* Estimate models
eststo clear
eststo: regress y x1 x2, vce(robust)
eststo: regress y x1 x2 x3, vce(robust)
eststo: regress y x1 x2 x3 x4, vce(cluster id)

* Export table
esttab using "results.tex", replace ///
    se star(* 0.10 ** 0.05 *** 0.01) ///
    label booktabs ///
    title("Main Results") ///
    mtitles("(1)" "(2)" "(3)")

Panel Data Setup

xtset panelid timevar          // declare panel structure
xtdescribe                      // check balance
xtsum outcome                   // within/between variation

* Fixed effects
xtreg y x1 x2, fe vce(cluster panelid)
* Or with reghdfe (preferred for multiple FE)
reghdfe y x1 x2, absorb(panelid timevar) vce(cluster panelid)

Difference-in-Differences

* Classic 2x2 DiD
gen post = (year >= treatment_year)
gen treat_post = treated * post
regress y treated post treat_post, vce(cluster id)

* Event study (uniform timing — must interact with treatment group)
reghdfe y ib(-1).rel_time#1.treated, absorb(id year) vce(cluster id)
testparm *.rel_time#1.treated   // pre-trend test

* Modern staggered DiD (Callaway & Sant'Anna)
csdid y x1 x2, ivar(id) time(year) gvar(first_treat) agg(event)
csdid_plot

Graph Export

* Publication-quality scatter with fit line
twoway (scatter y x, mcolor(navy%50) msize(small)) ///
       (lfit y x, lcolor(cranberry) lwidth(medthick)), ///
    title("Title Here") ///
    xtitle("X Label") ytitle("Y Label") ///
    legend(off) scheme(s2color)
graph export "figure1.pdf", replace as(pdf)
graph export "figure1.png", replace as(png) width(2400)

Data Cleaning Pipeline

* Load and inspect
import delimited "raw_data.csv", clear varnames(1)
describe
codebook, compact

* Clean
rename *, lower                 // lowercase all varnames
destring income, replace force  // convert string to numeric
replace income = . if income < 0

* Label
label variable income "Annual household income (USD)"
label define yesno 0 "No" 1 "Yes"
label values employed yesno

* Save
compress
save "clean_data.dta", replace

Multiple Imputation

mi set mlong
mi register imputed income education
mi impute chained (regress) income (ologit) education = age i.gender, add(20) rseed(12345)
mi estimate: regress wage income education age i.gender

Help Improve This Skill

If you produce Stata code with a significant error — wrong syntax, incorrect command usage, or a gotcha you failed to catch — and the issue seems to stem from a gap in these reference files rather than a one-off mistake, consider suggesting to the user that they file an issue on the skill repository. This helps future users.

When to raise this: Only after you've already corrected the error and the user has working code. Frame it as optional: "I made an error with [X] that I think comes from a gap in the Stata skill documentation. If you'd like, I can help you file an issue or a PR so it gets fixed for everyone."

When NOT to raise this: If the user is on Claude Haiku, the error is more likely a model capability issue than a documentation gap. In that case, suggest they try Sonnet or Opus for complex Stata work instead of filing an issue.

If the user agrees, read references/filing-issues.md for instructions on writing a good issue report.