Uist Reproducibility

UIST Reproducibility

Reproducibility at UIST means something different from rerunning a training script: the question is whether a competent lab could rebuild the artifact and reproduce its measured behavior. That decomposes into three ledgers — build, measurement, and study — and most UIST papers under-specify a different one than they think. UIST posts no reproducibility checklist (none found for 2026 — 待核实), so this discipline is self-imposed and reviewer-enforced.

The build ledger: could they make one?

Everything the system's behavior depends on, pinned:

• Software: exact framework and driver versions, OS, lockfiles; for anything learned, model checkpoints and training data provenance.
• Hardware: part numbers (not "an IMU" but which IMU), mechanical tolerances that matter, firmware version, and the calibration routine with expected outputs.
• Environment: the physical conditions the system assumes — lighting range, acoustic environment, mounting geometry, surface materials.
• Magic numbers: every threshold, filter coefficient, debounce window, and gain, with how each was set (tuned by hand? on which data?). These constants are where re-implementations actually fail.

The measurement ledger: could they get your numbers?

A latency or accuracy figure is reproducible only with its protocol:

Automate the protocol: a measurement harness checked into the supplement converts "trust me" into "run this" (see uist-artifact-evaluation for packaging).

# eval/rerun.sh — regenerate every reported number from raw logs
python analyze_latency.py logs/latency_10k.jsonl --out tables/table1.csv
python analyze_accuracy.py logs/study/ --split per-user --seed 17 --out tables/table2.csv
diff -u tables/table1.csv paper_tables/table1.csv   # drift check against the PDF

Log at the event level with timestamps and raw sensor values, not just computed outcomes — future you, rebuttal you (see uist-author-response), and replicating labs all consume the same logs.

The study ledger: could they rerun the human part?

For any user evaluation: full task instructions and stimuli, counterbalancing scheme, practice/rest structure, apparatus placement (photograph it), inclusion/exclusion criteria, compensation, and the analysis scripts from raw logs to reported statistics. Share instruments even when raw human data cannot leave the IRB envelope — protocol transparency and data availability are separable, and saying so precisely is the honest move.

The availability statement

Write one even though UIST does not require a template, and make it specific:

GOOD: "Firmware, PCB design files, BOM, and the measurement harness are at
      <archive-DOI> (tag: as-published). The gesture corpus (14 of 16
      participants consented to release) is included; per-participant raw
      video is withheld under IRB #—. The two commercial tracking SDKs
      required are named in BUILD.md with tested versions."
BAD:  "Code available upon reasonable request."

Papers with learned components inherit ML reporting norms too — seeds, training configs, compute — and can borrow the shared kit's checklists (see ../../resources/code/README.md).

Learned components inherit ML norms

When the system embeds recognition or generation models, the ML reporting conventions stack on top of the systems ledgers:

• Seeds, splits, and training configs pinned; per-user vs pooled evaluation made explicit (interaction data is brutally user-dependent, and pooled splits inflate accuracy).
• For third-party or hosted models: exact model identifiers and versions, the full prompt set, decoding parameters, and dated transcripts — hosted models drift, so the logged behavior is the only permanent record of what reviewers saw.
• Report the interactive costs alongside accuracy: per-inference latency on the deployment hardware, and per-session cost for metered APIs; a technique that is reproducible but unaffordable to run is only half-replicable.
• The shared kit's checklists cover this lane; the adapter in resources/code/README.md scopes what it can and cannot check.

The one-page REPRO.md

Compress the three ledgers into a single file at the archive root:

# Reproducing <SystemName> (paper §6-7)
## Rebuild        parts: BOM.csv · firmware: v2.3 · calibration: docs/calib.md
## Environment    tested: indoor 200-800 lux, 18-26°C · assumes: mounted per Fig 4
## Constants      thresholds in config.yaml — tuned on pilot data (n=4), §5.2
## Remeasure      eval/rerun.sh regenerates Tables 1-2 from logs/ (or raw capture)
## Study          instruments/ · counterbalancing: latin square, §7.1 · IRB #—
## Known drift    accuracy drops outdoors (§9); p95 latency sensitive to BLE stack

The "known drift" line is the credibility multiplier: it tells replicators you know where the envelope ends before they find out.

Replication drift and its uses

When a rebuilt system misses the paper's numbers, the causes rank: unstated environmental assumptions, hand-tuned constants, part substitutions, then genuine bugs. Pre-empt the first two by stating the envelope and the tuning story in the paper body — it costs three sentences and buys the paper years of credibility (and Lasting Impact eligibility runs on decade-scale credibility).

Output format

[Build ledger] pinned / gaps: <software · hardware · environment · constants>
[Measurement ledger] protocols pinned for <k>/<n> reported numbers
[Study ledger] instruments · counterbalancing · analysis scripts — present?
[Availability statement] drafted? honest about withholdings?
[Top drift risk] <the unstated assumption most likely to break replication>