Debug Rls

debug-rls

Systematic methodology for debugging Row-Level Security issues in Butterbase. Uses role simulation (as_role/as_user parameters) to verify policy behavior without needing real user sessions.

1. Overview

Row-Level Security (RLS) in Butterbase controls which rows each database role can see or modify. When RLS is misconfigured, users may see no data, too much data, or get unexpected errors on insert. This skill walks through a repeatable four-step process to identify and fix the root cause.

Key principle: MCP tools default to the service key (bb_sk_...), which bypasses all RLS. Always use as_role/as_user to simulate the role your frontend actually uses.

2. Quick Diagnosis

Match the symptom your user reports to the most likely cause before diving into the full protocol.

3. The Three Roles

Butterbase automatically assigns a database role based on the auth header of each request. You never create these roles — they are built in.

Important: When you call select_rows or insert_row without as_role, you are always running as butterbase_service. This means the result tells you nothing about what a real user would see. Use as_role to simulate the correct role.

4. Four-Step Debugging Protocol

Work through these steps in order. Each step narrows down the cause.

Step 1: Check if RLS is enabled

Call manage_rls with action: "list" for the app_id:

manage_rls(app_id: "app_abc123", action: "list")

Returns { policies: [...], tables_with_rls: [...] }. The tables_with_rls array shows which tables have RLS turned on but no policies yet (effective default deny).

• Look for the table in the response.
• If the table has no policies, RLS might not be enabled at all — or it was enabled but no policies were added, which causes a default deny for all non-service roles.
• If the table does appear, move to Step 2 to inspect what the policies actually do.

A table with RLS enabled but zero policies is inaccessible to butterbase_anon and butterbase_user. The butterbase_service role is unaffected.

Step 2: Inspect existing policies

Read each policy's fields carefully:

Common issues to look for:

• Policy exists for butterbase_user but not butterbase_anon (anonymous users blocked)
• Policy exists for SELECT but not INSERT (reads work, writes fail)
• USING expression references the wrong column (e.g., owner_id instead of user_id)
• Policy covers ALL commands but the WITH CHECK expression is missing (inserts may fail silently)

Step 3: Test as different roles

Use the as_role and as_user parameters on select_rows and insert_row to simulate each role. This is the most direct way to reproduce what a real user experiences.

# Test SELECT as an authenticated user
select_rows(
  app_id: "app_abc123",
  table: "posts",
  as_role: "user",
  as_user: "user-uuid-here"
)

# Test SELECT as anonymous
select_rows(
  app_id: "app_abc123",
  table: "posts",
  as_role: "anon"
)

# Test INSERT as an authenticated user
insert_row(
  app_id: "app_abc123",
  table: "posts",
  data: { title: "Hello" },
  as_role: "user",
  as_user: "user-uuid-here"
)

Compare results between roles:

If results differ from expectations, you have confirmed which role/command combination is misconfigured.

Without as_role, MCP tools always use the service key and bypass RLS. Never use this to validate that RLS is working.

Step 4: Check auto-populate trigger

This step specifically diagnoses AUTH_RLS_POLICY_VIOLATION on INSERT.

1. Insert a row as a user (using as_role: "user"):

insert_row(
  app_id: "app_abc123",
  table: "posts",
  data: { title: "Test post" },
  as_role: "user",
  as_user: "user-uuid-here"
)

2. Check if the user_id / author_id column was auto-populated in the returned row.

3. If the column is NULL or missing from the response, the auto-populate trigger is missing. The RLS policy requires user_id = current_user_id(), but the column was never filled in, so the WITH CHECK fails.

Root cause: enable_rls + create_policy (without user_column) does not install an auto-populate trigger. Clients would need to manually include the user column in every POST body — which most frontends don't do.

Fix: See Fix 1 or Fix 3 in the next section.

5. Common Fixes

Four ready-to-use recipes. Copy the MCP tool call that matches your situation.

Fix 1: Enable basic user isolation

Use this when a table has no RLS at all and you want users to only see their own rows.

manage_rls(
  app_id: "app_abc123",
  action: "create_user_isolation",
  table_name: "posts",
  user_column: "author_id"
)

What this creates automatically:

• RLS enabled on the table
• User isolation policy: author_id = current_user_id()::uuid for ALL commands
• Auto-populate trigger: sets author_id from the JWT on INSERT (clients don't need to send it)
• Service bypass: butterbase_service always passes through (built into the platform)

This is the recommended starting point for any user-owned data table.

Fix 2: Add public read access

Use this when you want anonymous users (or all authenticated users) to be able to read certain rows — for example, published blog posts or public profiles.

manage_rls(
  app_id: "app_abc123",
  action: "create_policy",
  table_name: "posts",
  policy_name: "public_read_published",
  command: "SELECT",
  role: "anon",
  using_expression: "published = true"
)

This lets anonymous users read posts where published = true. They still cannot read unpublished posts or write anything.

To also allow authenticated (non-anonymous) users to read public rows, add a second policy with role: "user" and the same using_expression.

Alternatively, if you haven't set up user isolation yet, use the public_read_column shorthand:

manage_rls(
  app_id: "app_abc123",
  action: "create_user_isolation",
  table_name: "posts",
  user_column: "author_id",
  public_read_column: "published"
)

This sets up user isolation and adds permissive SELECT policies for both butterbase_user and butterbase_anon to read rows where published = true — in a single call.

Fix 3: Fix missing auto-populate trigger

Use this when inserts fail with AUTH_RLS_POLICY_VIOLATION and the user column is NULL after insert (diagnosed in Step 4).

Option A — Recommended: replace with create_user_isolation

The cleanest fix if you're starting fresh or can replace the existing policy:

manage_rls(
  app_id: "app_abc123",
  action: "create_user_isolation",
  table_name: "posts",
  user_column: "author_id"
)

Always includes the auto-populate trigger. No manual step needed.

Option B — additive: pass user_column on create_policy

Use this when you want to keep existing policies but just install the trigger:

manage_rls(
  app_id: "app_abc123",
  action: "create_policy",
  table_name: "posts",
  policy_name: "posts_user_insert",
  command: "INSERT",
  role: "user",
  with_check_expression: "author_id = current_user_id()::uuid",
  user_column: "author_id"
)

Passing user_column to create_policy installs the auto-populate trigger alongside the policy.

Without the trigger: clients must include the user column (author_id, user_id, etc.) in every POST body. Most frontends don't do this, causing all inserts to fail with RLS violations.

Fix 4: Add cross-table restrictive check

Use this when you need to enforce a condition that involves another table — for example, only allowing comments on published posts.

manage_rls(
  app_id: "app_abc123",
  action: "create_policy",
  table_name: "comments",
  policy_name: "comments_on_public_posts_only",
  command: "INSERT",
  role: "user",
  with_check_expression: "EXISTS (SELECT 1 FROM posts WHERE posts.id = post_id AND posts.published = true)",
  restrictive: true
)

Why restrictive: true?

A RESTRICTIVE policy is AND'd with all permissive policies. Without it, if the user isolation policy already passes (because user_id = current_user_id()), the cross-table check would never be evaluated — users could comment on private posts.

Setting restrictive: true ensures this check runs in addition to any permissive policies, so both conditions must be satisfied.

Use RESTRICTIVE policies sparingly — only when a condition must never be bypassed by another policy.

6. Expression Reference

Helper functions

Use current_user_id() (text) when your user column is TEXT. Use current_user_id()::uuid when your user column is UUID. Mismatched types cause silent policy failures.

Policy clauses

For ALL command policies, both USING and WITH CHECK may apply:

• On SELECT/DELETE: only USING is evaluated
• On INSERT: only WITH CHECK is evaluated
• On UPDATE: both are evaluated (USING for old row, WITH CHECK for new row)

Policy permissiveness

Example: If a table has two permissive policies (user isolation + public read), a row is visible if either passes. If you add a restrictive policy, the row is only visible if the restrictive condition also passes.

7. Verification Checklist

After applying any fix, run through this checklist to confirm correct behavior:

• manage_rls (action: "list") shows the expected policies for the table
• select_rows with as_role: "user" returns only the user's own rows
• select_rows with as_role: "anon" returns only publicly visible rows (or empty if no anon policy)
• select_rows without as_role (service) returns all rows (confirms RLS is only blocking end-users, not admin)
• insert_row with as_role: "user" succeeds and the user column is auto-populated
• insert_row with as_role: "anon" fails (unless you explicitly added an anon INSERT policy)
• select_rows with as_role: "user" for a different user's UUID does not return the first user's rows

8. Anti-Patterns to Avoid

If a docs/butterbase/00-state.md exists in the working directory, prefer invoking via /butterbase-skills:journey-rls so the journey orchestrator stays in sync.