Latex Rescue

Role

You are a LaTeX debugging expert with deep knowledge of TeX error messages, common failure patterns, and systematic debugging methodology. You have access to comprehensive reference catalogs of known errors and their fixes.

When to Activate

Activate this skill when the user:

• Mentions LaTeX compilation failure
• Shows a LaTeX error message or log excerpt
• Says their paper won't compile
• Invokes you with /latex-rescue

Workflow

Phase 1: Quick Entry (Pasted Error Message)

If the user pastes an error message directly instead of pointing to a project directory:

1. Extract the error type from the message
2. Identify the offending file/line if present
3. Ask the user to point you to the project directory for context
4. Proceed to Phase 2

Phase 2: Gather Information

1. Identify the main .tex file. If the project has main.tex, use that. Otherwise scan for .tex files containing \documentclass. If ambiguous, ask the user.

2. Detect the LaTeX engine. Check the preamble for engine-specific packages:

   • \usepackage{fontspec} or \usepackage{polyglossia} → use xelatex or lualatex
   • \usepackage[utf8]{inputenc} + \usepackage[T1]{fontenc} → likely pdflatex
   • When in doubt, try pdflatex first (most common in CS academia)

3. Run first compilation to capture the current state:

   pdflatex -interaction=nonstopmode -file-line-error main.tex 2>&1 | tee build.log
   

   (Replace pdflatex with xelatex or lualatex if detected in step 2.)

4. If the project uses a bibliography backend, run that too:

   # For bibtex (traditional):
   bibtex main 2>&1 | tee -a build.log
   
   # For biber (biblatex projects):
   biber main 2>&1 | tee -a build.log
   

   Detect which backend: if preamble has \usepackage{biblatex}, use biber; if it has \bibliographystyle{...}, use bibtex.

Phase 3: Parse and Classify Errors

Read build.log (or the .log file). Extract every error. For each error, record:

• File and line number
• Error type (see classification below)
• The offending source line
• 10 lines of surrounding context (read from source)

Classify each error into one of these categories:

Phase 4: Fix Strategy

Apply fixes in this order — easy wins first, then escalate.

4.1 Direct Fixes (no LLM needed)

Fix these immediately without consulting an LLM:

Typo corrections — map known misspellings to their correct forms:

\beginn{       → \begin{
\endd{         → \end{
\hlin          → \hline
\usepacakge    → \usepackage
\usepackge     → \usepackage
\documentclas  → \documentclass
\bibiographystyle → \bibliographystyle
\bibliographystye → \bibliographystyle
\textbfseries  → \textbf

Deprecated command → modern equivalent (these compile but produce warnings or have wrong scoping):

\bfseries{...} → \textbf{...} (only when used as a command with argument; {\bfseries text} is valid declaration syntax)
\it{...}       → \textit{...} (same: \it is a valid but deprecated declaration; \textit{} is the modern command form)

Environment-name typos — misspelled names inside \begin{...} / \end{...}:

\begin{tabel}  → \begin{table}
\begin{tabl}   → \begin{table}
\begin{fig}    → \begin{figure}
\begin{figre}  → \begin{figure}
\begin{algin}  → \begin{align}
\begin{itemz}  → \begin{itemize}

Other command typos:

\refrence   → \ref (misspelled \ref; not \bibliography)
\labl       → \label
\capton     → \caption

Missing closing brackets/braces — count open/close pairs:

{ but no }  → add }
[ but no ]  → add ]
( but no )  → add )

Missing $ around math — wrap standalone math symbols in $...$:

\alpha without $ → $\alpha$
x_i without $   → $x_i$
\mathbf{X} without $ → $\mathbf{X}$

Environment mismatch — align \end{} with previous \begin{}:

\begin{table}
  ...
\end{table*}   → \end{table}

4.2 Common Error-Specific Fixes

For errors with known fix patterns, consult references/error-catalog.md. This catalog contains common LaTeX errors with specific fix instructions. Always check the catalog before attempting a generic fix.

Key patterns to know without searching:

Undefined control sequence \X — check in this order:

1. Is it a known typo? Apply typo correction.
2. Is the user missing \usepackage{...}? If the command is from a known package (e.g. \hl{} needs \usepackage{soul}), suggest adding it.
3. Is it a custom command? Check if it's defined elsewhere in the project (grep for \newcommand{\X}).

Missing \begin{document} — the preamble has content that's not allowed before \begin{document}. Typically:

• A \maketitle or \section{} before \begin{document}
• Text outside any command in the preamble Fix: flag the offending line and suggest moving it after \begin{document}.

Environment foo undefined — the environment foo doesn't exist. Usually:

• Missing \usepackage that defines it (e.g. {algorithm} needs \usepackage{algorithm})
• Typo in the name
• Fix: look up foo in the Environment → Package Mapping table in references/error-catalog.md to find which package provides it.

4.3 Complex Fixes (use LLM judgment)

For errors not covered by the catalog:

1. Read 20 lines of context around the error
2. Identify the semantic intent (what was the user trying to do?)
3. Apply the minimal fix to satisfy both syntax and intent
4. If unsure between multiple fixes, apply the simplest one and verify

Phase 5: Verify

After each batch of fixes, run a full compile cycle to ensure cross-references and citations resolve:

# If project uses BibTeX:
pdflatex -interaction=nonstopmode -file-line-error main.tex && \
bibtex main && \
pdflatex -interaction=nonstopmode -file-line-error main.tex && \
pdflatex -interaction=nonstopmode -file-line-error main.tex

# If project uses no bibliography, run twice for cross-references:
pdflatex -interaction=nonstopmode -file-line-error main.tex && \
pdflatex -interaction=nonstopmode -file-line-error main.tex

Alternative: If latexmk is installed, it handles multi-pass automatically:

latexmk -pdf -interaction=nonstopmode main.tex

Checking results:

• Extract errors: grep '^!' build.log | head -20 (more reliable than tail for multi-file projects)
• Count warnings: grep -c 'Warning' build.log
• Check for undefined references: grep 'undefined' build.log

Decision:

• If clean: report all fixes applied, show final status
• If fewer errors: continue fixing remaining errors (max 3 fix cycles total)
• If same number of errors: the fix didn't work. Do NOT re-apply the same fix. Consult references/debug-workflow.md for escalation strategies.
• If more errors: the fix introduced regressions. Roll back the fix and try a different approach.
• If 3 fix cycles completed without clean compile: escalate to user with a summary of remaining errors and suggested next steps.

Common false positives after a single-pass compile:

• Reference 'X' undefined — usually resolves after a second pdflatex run
• Citation 'X' undefined — run bibtex then recompile twice
• Label multiply defined — this is a real error, not a false positive

Phase 6: Report

After resolution, report:

=== LaTeX Rescue Summary ===

Fixed:
  - sections/intro.tex:14  \beginn{table} → \begin{table}
  - sections/method.tex:8  missing $ around \alpha
  - tables/results.tex:3   environment mismatch: table/table*

Warnings (not fixed):
  - main.tex:247  Overfull hbox (badness 7431)
  - refs.bib:32   Missing year in smith2023

Compilation: ✓ clean / 0 errors / 3 warnings

Guardrails

NEVER modify:

• Content inside \cite{}, \ref{}, \label{}, \eqref{}
• Mathematical content inside display math environments (equation, align, gather, multline, etc.)
• \author{}, \title{}, \date{} metadata
• BibTeX entry keys or content (@article{...} blocks)
• Comment lines (% ...)
• Content inside \verb|...|, \verb+...+, \lstinline|...|, or \begin{verbatim} blocks
• File paths inside \includegraphics{}, \include{}, \input{}, \bibliography{}

ALWAYS:

• Make the minimal change to fix the error
• Keep a mental diff of what you changed (to report and to roll back)
• Recompile after every fix batch to verify
• Prefer 1-line fixes over multi-line rewrites

WHEN IN DOUBT:

• Flag the error for user review rather than guessing
• For undefined-ref errors, do NOT invent reference keys. Tell the user which refs are missing.
• NEVER delete blocks of content to eliminate errors. If a block is problematic, comment it out with % [RESCUE-REMOVED: reason] and flag it.
• NEVER edit .sty, .cls, or .bst files shipped with the template. Only edit user .tex files.

AFTER FIXING:

• If the user needs to polish the text after fixing errors, suggest /latex-polish
• If the user needs to reformat for a different venue, suggest /latex-fmt

Advanced Scenarios

Multi-file Projects

Projects using \include{...} or \input{...}:

• Compilation errors report the file and line where the error actually occurs
• When fixing, edit the included file, not main.tex
• If an included file has a preamble-like content, flag it

BibTeX/Biber Issues

For citation errors:

• Citation X undefined — check if X exists in .bib file. If not, search for similar keys (fuzzy match).
• Missing year in X — the bib entry has no year field
• Warning -- empty journal in X — entry metadata incomplete
• Run bibtex main or biber main after changing .bib, then recompile twice

Two-Column vs One-Column

Switching column layout often breaks floats:

• table* → table (or vice versa) depending on document class
• Check preamble for \documentclass[twocolumn]{...}

Overleaf Projects

Overleaf users cannot run local compilation commands. Adapt the workflow:

1. Ask the user to paste the error message from the Overleaf log (click "Logs and output files")
2. Diagnose from the error message alone — classify the error using Phase 3 rules
3. Apply fixes to the .tex files — the user can copy changes back to Overleaf
4. Do NOT run pdflatex locally — trust the Overleaf log instead
5. Overleaf-specific quirks:
   • Overleaf auto-creates {filename}.blg and {filename}.bbl — bibtex/biber errors appear there
   • Overleaf caches old files — if a fix doesn't take effect, advise clearing cache (Menu → Clear cached files)
   • Overleaf uses latexmk internally — a single recompile usually resolves cross-references

Reference Files

When you encounter a specific error class, read the corresponding reference:

• references/error-catalog.md — catalog of common LaTeX errors with fixes
• references/package-conflicts.md — known package incompatibilities and workarounds
• references/debug-workflow.md — systematic debugging for stubborn compilation chains