Managing Prosthodontic Cases
Structures prosthodontic evaluation, treatment planning, and execution for fixed prosthetics (crowns, bridges, implant restorations), removable prosthetics (complete and partial dentures), and combined fixed-removable rehabilitation using Kennedy classification, Siebert ridge classification, and evidence-based material selection.
Why This Skill Exists
Prosthodontic treatment represents the highest-cost category of dental care and the area most vulnerable to planning errors. A poorly planned bridge creates biomechanical overload leading to abutment failure. A denture fabricated without proper jaw relation records produces a prosthesis the patient cannot wear. An implant placed without prosthodontic-driven positioning results in a restoration that is uncleanable, unesthetic, or both. The remake rate for prosthodontic cases averages 5–8% nationally, and each remake costs $500–$2,000 in lab fees, materials, and chair time.
This skill structures the diagnostic workup, treatment sequencing, impression and jaw relation protocols, and delivery procedures that reduce remakes and produce predictable, functional, esthetic prosthetic outcomes.
Checkpoint A: Pre-Treatment Intake (Mandatory)
- What teeth are missing, and what teeth remain (full dental charting)?
- What is the patient's chief complaint and treatment goal (function, esthetics, both)?
- What is the periodontal status of remaining teeth (probing depths, mobility, furcation involvement)?
- What is the occlusal scheme (Angle classification, vertical dimension assessment, parafunctional habits)?
- What prior prosthetic history exists (previous dentures, bridges, implants, failures)?
- What is the patient's medical history relevant to prosthodontics (xerostomia, osteoporosis, bisphosphonates, radiation history)?
- What is the patient's financial situation and insurance coverage for prosthetic options?
- Has the patient been evaluated for implant candidacy (bone volume, systemic health, expectations)?
Documents to Request
- Full-mouth periapical radiograph series or panoramic radiograph
- Diagnostic casts or digital scans of maxillary and mandibular arches
- Face-bow transfer record (if full-arch or complex case)
- Centric relation record or bite registration
- Photographs (full face smile, retracted anterior, lateral)
- Periodontal charting with mobility grades
- CBCT scan (if implant-supported restoration planned)
- Prior prosthetic records (lab prescriptions, denture duplicates)
Step 1: Diagnostic Classification
Kennedy Classification of Partially Edentulous Arches
| Class |
Description |
Design Implication |
| Class I |
Bilateral distal extension (edentulous areas posterior to remaining teeth) |
Requires combined tooth-tissue support; consider distal extension RPD design with altered cast impression |
| Class II |
Unilateral distal extension |
Asymmetric support; requires careful path of insertion and indirect retention |
| Class III |
Unilateral bounded edentulous space |
Tooth-supported RPD possible; fixed bridge alternative often preferred |
| Class IV |
Single bilateral anterior edentulous space crossing midline |
Tooth-supported; esthetics critical; no modification spaces |
Applegate's Rules: Modification spaces are additional edentulous areas in the same arch. Modification spaces are numbered (Mod 1, Mod 2, etc.) but do not change the primary Kennedy class.
Siebert Ridge Classification (Residual Ridge Defects)
| Class |
Defect Pattern |
Prosthetic Impact |
| I |
Buccolingual loss of ridge width |
Pontic esthetics compromised; may need ridge augmentation |
| II |
Apicocoronal loss of ridge height |
Increased crown height; possible esthetic deficit |
| III |
Combined loss of width and height |
Significant prosthetic challenge; often requires surgical ridge augmentation before fixed prosthetics |
Step 2: Treatment Planning — Fixed Prosthetics
Crown Indications and Abutment Assessment
| Factor |
Favorable for Crown/Bridge |
Unfavorable |
| Crown-to-root ratio |
≥ 1:1 after preparation |
< 1:1 (poor prognosis as abutment) |
| Root configuration |
Multi-rooted, divergent |
Single, tapered, or fused roots |
| Periodontal status |
≤ 3 mm probing, no mobility |
Mobility Grade II+, furcation involvement |
| Endodontic status |
Vital or adequately treated |
Failed endo, persistent periapical pathology |
| Remaining tooth structure |
≥ 2 mm ferrule of sound dentin |
Subgingival caries, insufficient ferrule |
Ante's Law and Bridge Planning
Ante's Law: The combined root surface area of abutment teeth must equal or exceed the root surface area of the teeth being replaced. This is a guideline, not an absolute rule — modify based on periodontal status, occlusal forces, and number of pontics.
Bridge Design Principles
- Pier abutment problem: An intermediate abutment between two segments creates a fulcrum; use non-rigid connectors or consider segmented prosthetics
- Cantilever bridges: Maximum one pontic; the abutment must have excellent bone support and favorable crown-to-root ratio
- Pontic design: Ovate pontic for anterior esthetics (requires ridge preparation); modified ridge lap for premolars; hygienic (sanitary) for posterior areas with access challenges
- Connector design: Minimum 4 mm² cross-section for metal connectors; 9 mm² for all-ceramic connectors (zirconia); 16 mm² for lithium disilicate connectors
Step 3: Treatment Planning — Removable Prosthetics
Complete Denture Treatment Sequence
- Preliminary impressions: Irreversible hydrocolloid in stock tray for diagnostic casts
- Custom tray fabrication: Acrylic or light-cured resin with 2–3 mm spacer, border-molded with impression compound or PVS
- Final impression: Medium-body PVS or zinc oxide-eugenol in border-molded custom tray
- Jaw relation records: Face-bow transfer; centric relation record (using Gothic arch tracing, bimanual manipulation, or wax rim technique); vertical dimension of occlusion (VDO) determination
- Tooth selection and arrangement: Select teeth (shade, mold, size) matching patient's facial proportions; arrange in balanced articulation
- Wax try-in: Verify esthetics, phonetics (S, F/V sounds), VDO, CR, lip support with patient
- Processing: Flask, pack, and process; remount to correct processing errors
- Delivery: Verify fit, occlusion, and esthetics; provide patient with insertion/removal instructions and care instructions
- Adjustments: 24-hour follow-up; subsequent adjustments at 48 hours, 1 week, 1 month
VDO Assessment Methods
| Method |
Technique |
Limitation |
| Closest speaking space |
Measure during "S" sounds; VDO = closest speaking space + 1–2 mm |
Requires patient cooperation |
| Facial proportions |
Lower third of face should equal middle third |
Approximation only |
| Swallowing method |
Mandible returns to rest position during swallow |
Unreliable in edentulous patients |
| Pre-extraction records |
Use prior denture or records as reference |
Not always available |
| Willis gauge |
Nose-chin distance (mouth closed) ≈ pupil-commissure distance |
Rough approximation |
Removable Partial Denture Components
| Component |
Function |
Design Consideration |
| Major connector |
Connects RPD components across arch |
Maxillary: palatal plate, horseshoe, or palatal strap. Mandibular: lingual bar (most common), lingual plate |
| Rests |
Transmit occlusal forces to abutment teeth |
Placed on prepared rest seats; must be rigid (not flexible) |
| Direct retainers (clasps) |
Retain RPD against displacement |
Circumferential (suprabulge) or bar (infrabulge); reciprocal arm required |
| Indirect retainers |
Resist rotational displacement in distal extension |
Placed as far anterior to fulcrum line as possible |
| Denture base |
Supports artificial teeth; contacts residual ridge |
Acrylic or metal mesh; distal extension bases require accurate tissue impression |
Step 4: Implant-Supported Prosthodontics
Implant Prosthetic Planning Hierarchy
- Prosthodontic-driven placement: Plan the final restoration FIRST; then determine implant position to support that restoration
- Diagnostic wax-up or digital design: Create the ideal tooth position before CBCT or surgical planning
- Surgical guide: Fabricate based on prosthetic plan; fully guided or partially guided
- Abutment selection: Stock vs. custom; cement-retained vs. screw-retained
- Restoration fabrication: Follow standard lab coordination protocols
Implant Prosthetic Options by Edentulism
| Clinical Scenario |
Prosthetic Option |
Minimum Implants |
| Single tooth |
Screw-retained implant crown |
1 |
| Short-span bounded space (2–3 teeth) |
Implant-supported FPD |
2 |
| Long-span posterior |
Implant-supported FPD |
2–3 |
| Fully edentulous — fixed |
Implant-supported fixed full-arch prosthesis (All-on-4/6) |
4 (mandible), 4–6 (maxilla) |
| Fully edentulous — removable |
Implant-retained overdenture |
2 (mandible; gold standard), 4 (maxilla) |
Cement-Retained vs. Screw-Retained Decision
| Factor |
Cement-Retained |
Screw-Retained |
| Retrievability |
Difficult; cement may not release |
Easy; access through screw channel |
| Excess cement risk |
Peri-implant cement disease possible |
None |
| Esthetics |
No screw access hole |
Screw access hole on occlusal/palatal surface |
| Passive fit requirement |
More forgiving |
Demanding; misfit causes screw loosening |
| Preferred when |
Angulation correction needed; anterior esthetics critical |
Single implant crowns; posterior; when retrievability desired |
Step 5: Impression Techniques and Digital Workflow
Impression Material Selection
| Material |
Working Time |
Accuracy |
Best For |
Limitation |
| Polyvinyl siloxane (PVS) |
2–4 min |
Excellent (< 25 µm) |
Crowns, bridges, implant impressions |
Hydrophobic; moisture-sensitive |
| Polyether |
2–3 min |
Excellent |
Implant impressions, full-arch |
Rigid; difficult removal from undercuts; moisture sensitive storage |
| Alginate (irreversible hydrocolloid) |
1.5–2 min |
Moderate |
Diagnostic casts, study models, opposing arch |
Dimensionally unstable; pour within 30 minutes |
| Digital intraoral scan |
N/A |
Excellent (< 20 µm for single units) |
Single crowns, short-span bridges, implant scan bodies |
Accuracy decreases with full-arch scans; learning curve |
Digital vs. Conventional Workflow Decision
| Factor |
Digital (Intraoral Scan) |
Conventional (Impression) |
| Single unit accuracy |
Comparable or superior |
Established gold standard |
| Full-arch accuracy |
Improving but variable by scanner |
More consistent with experienced technique |
| Patient comfort |
Preferred by 90%+ of patients |
Gag reflex and discomfort common |
| Immediate quality check |
Yes — review margins on screen before sending |
No — defects discovered at lab |
| Lab communication |
STL file + digital shade + photos |
Physical impression + shade tab + written Rx |
| Cost per unit |
Lower marginal cost after scanner investment |
Material cost per impression |
Checkpoint B: Post-Delivery Alignment (Mandatory)
- Does the prosthesis meet the treatment plan objectives (function, esthetics, occlusion)?
- Was the occlusion verified in centric and excursive movements with articulating paper?
- Were radiographs taken to verify fit of fixed restorations and implant components?
- Were the patient's home care instructions provided (denture care, bridge flossing, implant hygiene)?
- Are follow-up appointments scheduled (adjustments, recall, screw-retorquing for implants)?
Quality Audit
| # |
Criterion |
Pass / Fail |
| 1 |
Diagnostic casts or digital scans obtained before treatment planning |
|
| 2 |
Kennedy classification documented for removable partial denture cases |
|
| 3 |
Abutment teeth assessed for crown-to-root ratio, periodontal status, and endodontic status |
|
| 4 |
Face-bow transfer performed for all full-arch and complex occlusion cases |
|
| 5 |
Centric relation record verified before prosthetic fabrication |
|
| 6 |
VDO assessment method documented with rationale |
|
| 7 |
Wax try-in completed for complete dentures and RPDs with patient approval |
|
| 8 |
Lab prescription complete with all required elements per ADA/FDA standard |
|
| 9 |
Implant position prosthodontically driven with diagnostic wax-up or digital plan |
|
| 10 |
Connector dimensions meet minimum cross-section requirements for the material |
|
| 11 |
Pontic design appropriate for location (ovate anterior, hygienic posterior) |
|
| 12 |
Post-delivery occlusion verified and adjusted |
|
| 13 |
Follow-up adjustments scheduled and completed |
|
| 14 |
Remake root cause documented when applicable (lab error, impression, communication) |
|
Guidelines
- Never skip the diagnostic wax-up or digital design phase for complex cases — it is the single most effective tool for preventing prosthodontic remakes
- Face-bow transfer is mandatory for any case involving changes to the occlusal plane or VDO; it is strongly recommended for all multi-unit fixed prosthetics
- Verify centric relation independently of the patient's habitual bite — maximum intercuspation ≠ centric relation in most partially dentate patients
- For distal extension RPDs, use an altered cast (reline) impression technique to capture the distal extension ridge under functional load
- Implant placement must be prosthodontically driven — a surgically convenient position that produces an unrestorable or uncleanable restoration is a failure regardless of osseointegration
- Document every try-in appointment with patient feedback on esthetics, phonetics, and comfort — this protects against post-delivery disputes
- Screw-retained implant crowns are preferred for single implant restorations due to retrievability and absence of cement risk
- Track remake rates by case type, provider, and lab — this data drives quality improvement more than any other metric in prosthodontics
1---2name: managing-prosthodontic-cases3description: Structures prosthodontic evaluation with crown, bridge, and denture planning documentation. Use when planning prosthetic restorations, documenting impression techniques, or managing prosthetic treatment.4---5
6# Managing Prosthodontic Cases
7
8Structures prosthodontic evaluation, treatment planning, and execution for fixed prosthetics (crowns, bridges, implant restorations), removable prosthetics (complete and partial dentures), and combined fixed-removable rehabilitation using Kennedy classification, Siebert ridge classification, and evidence-based material selection.
9
10## Why This Skill Exists
11
12Prosthodontic treatment represents the highest-cost category of dental care and the area most vulnerable to planning errors. A poorly planned bridge creates biomechanical overload leading to abutment failure. A denture fabricated without proper jaw relation records produces a prosthesis the patient cannot wear. An implant placed without prosthodontic-driven positioning results in a restoration that is uncleanable, unesthetic, or both. The remake rate for prosthodontic cases averages 5–8% nationally, and each remake costs $500–$2,000 in lab fees, materials, and chair time.
13
14This skill structures the diagnostic workup, treatment sequencing, impression and jaw relation protocols, and delivery procedures that reduce remakes and produce predictable, functional, esthetic prosthetic outcomes.
15
16---
17
18## Checkpoint A: Pre-Treatment Intake (Mandatory)
19
201. What teeth are missing, and what teeth remain (full dental charting)?
212. What is the patient's chief complaint and treatment goal (function, esthetics, both)?
223. What is the periodontal status of remaining teeth (probing depths, mobility, furcation involvement)?
234. What is the occlusal scheme (Angle classification, vertical dimension assessment, parafunctional habits)?
245. What prior prosthetic history exists (previous dentures, bridges, implants, failures)?
256. What is the patient's medical history relevant to prosthodontics (xerostomia, osteoporosis, bisphosphonates, radiation history)?
267. What is the patient's financial situation and insurance coverage for prosthetic options?
278. Has the patient been evaluated for implant candidacy (bone volume, systemic health, expectations)?
28
29### Documents to Request
30
31- Full-mouth periapical radiograph series or panoramic radiograph
32- Diagnostic casts or digital scans of maxillary and mandibular arches
33- Face-bow transfer record (if full-arch or complex case)
34- Centric relation record or bite registration
35- Photographs (full face smile, retracted anterior, lateral)
36- Periodontal charting with mobility grades
37- CBCT scan (if implant-supported restoration planned)
38- Prior prosthetic records (lab prescriptions, denture duplicates)
39
40---
41
42## Step 1: Diagnostic Classification
43
44### Kennedy Classification of Partially Edentulous Arches
45
46| Class | Description | Design Implication |
47|-------|------------|-------------------|
48| Class I | Bilateral distal extension (edentulous areas posterior to remaining teeth) | Requires combined tooth-tissue support; consider distal extension RPD design with altered cast impression |
49| Class II | Unilateral distal extension | Asymmetric support; requires careful path of insertion and indirect retention |
50| Class III | Unilateral bounded edentulous space | Tooth-supported RPD possible; fixed bridge alternative often preferred |
51| Class IV | Single bilateral anterior edentulous space crossing midline | Tooth-supported; esthetics critical; no modification spaces |
52
53**Applegate's Rules**: Modification spaces are additional edentulous areas in the same arch. Modification spaces are numbered (Mod 1, Mod 2, etc.) but do not change the primary Kennedy class.
54
55### Siebert Ridge Classification (Residual Ridge Defects)
56
57| Class | Defect Pattern | Prosthetic Impact |
58|-------|---------------|------------------|
59| I | Buccolingual loss of ridge width | Pontic esthetics compromised; may need ridge augmentation |
60| II | Apicocoronal loss of ridge height | Increased crown height; possible esthetic deficit |
61| III | Combined loss of width and height | Significant prosthetic challenge; often requires surgical ridge augmentation before fixed prosthetics |
62
63---
64
65## Step 2: Treatment Planning — Fixed Prosthetics
66
67### Crown Indications and Abutment Assessment
68
69| Factor | Favorable for Crown/Bridge | Unfavorable |
70|--------|---------------------------|-------------|
71| Crown-to-root ratio | ≥ 1:1 after preparation | < 1:1 (poor prognosis as abutment) |
72| Root configuration | Multi-rooted, divergent | Single, tapered, or fused roots |
73| Periodontal status | ≤ 3 mm probing, no mobility | Mobility Grade II+, furcation involvement |
74| Endodontic status | Vital or adequately treated | Failed endo, persistent periapical pathology |
75| Remaining tooth structure | ≥ 2 mm ferrule of sound dentin | Subgingival caries, insufficient ferrule |
76
77### Ante's Law and Bridge Planning
78
79Ante's Law: The combined root surface area of abutment teeth must equal or exceed the root surface area of the teeth being replaced. This is a guideline, not an absolute rule — modify based on periodontal status, occlusal forces, and number of pontics.
80
81### Bridge Design Principles
82
831. **Pier abutment problem**: An intermediate abutment between two segments creates a fulcrum; use non-rigid connectors or consider segmented prosthetics
842. **Cantilever bridges**: Maximum one pontic; the abutment must have excellent bone support and favorable crown-to-root ratio
853. **Pontic design**: Ovate pontic for anterior esthetics (requires ridge preparation); modified ridge lap for premolars; hygienic (sanitary) for posterior areas with access challenges
864. **Connector design**: Minimum 4 mm² cross-section for metal connectors; 9 mm² for all-ceramic connectors (zirconia); 16 mm² for lithium disilicate connectors
87
88---
89
90## Step 3: Treatment Planning — Removable Prosthetics
91
92### Complete Denture Treatment Sequence
93
941. **Preliminary impressions**: Irreversible hydrocolloid in stock tray for diagnostic casts
952. **Custom tray fabrication**: Acrylic or light-cured resin with 2–3 mm spacer, border-molded with impression compound or PVS
963. **Final impression**: Medium-body PVS or zinc oxide-eugenol in border-molded custom tray
974. **Jaw relation records**: Face-bow transfer; centric relation record (using Gothic arch tracing, bimanual manipulation, or wax rim technique); vertical dimension of occlusion (VDO) determination
985. **Tooth selection and arrangement**: Select teeth (shade, mold, size) matching patient's facial proportions; arrange in balanced articulation
996. **Wax try-in**: Verify esthetics, phonetics (S, F/V sounds), VDO, CR, lip support with patient
1007. **Processing**: Flask, pack, and process; remount to correct processing errors
1018. **Delivery**: Verify fit, occlusion, and esthetics; provide patient with insertion/removal instructions and care instructions
1029. **Adjustments**: 24-hour follow-up; subsequent adjustments at 48 hours, 1 week, 1 month
103
104### VDO Assessment Methods
105
106| Method | Technique | Limitation |
107|--------|-----------|-----------|
108| Closest speaking space | Measure during "S" sounds; VDO = closest speaking space + 1–2 mm | Requires patient cooperation |
109| Facial proportions | Lower third of face should equal middle third | Approximation only |
110| Swallowing method | Mandible returns to rest position during swallow | Unreliable in edentulous patients |
111| Pre-extraction records | Use prior denture or records as reference | Not always available |
112| Willis gauge | Nose-chin distance (mouth closed) ≈ pupil-commissure distance | Rough approximation |
113
114### Removable Partial Denture Components
115
116| Component | Function | Design Consideration |
117|-----------|----------|---------------------|
118| Major connector | Connects RPD components across arch | Maxillary: palatal plate, horseshoe, or palatal strap. Mandibular: lingual bar (most common), lingual plate |
119| Rests | Transmit occlusal forces to abutment teeth | Placed on prepared rest seats; must be rigid (not flexible) |
120| Direct retainers (clasps) | Retain RPD against displacement | Circumferential (suprabulge) or bar (infrabulge); reciprocal arm required |
121| Indirect retainers | Resist rotational displacement in distal extension | Placed as far anterior to fulcrum line as possible |
122| Denture base | Supports artificial teeth; contacts residual ridge | Acrylic or metal mesh; distal extension bases require accurate tissue impression |
123
124---
125
126## Step 4: Implant-Supported Prosthodontics
127
128### Implant Prosthetic Planning Hierarchy
129
1301. **Prosthodontic-driven placement**: Plan the final restoration FIRST; then determine implant position to support that restoration
1312. **Diagnostic wax-up or digital design**: Create the ideal tooth position before CBCT or surgical planning
1323. **Surgical guide**: Fabricate based on prosthetic plan; fully guided or partially guided
1334. **Abutment selection**: Stock vs. custom; cement-retained vs. screw-retained
1345. **Restoration fabrication**: Follow standard lab coordination protocols
135
136### Implant Prosthetic Options by Edentulism
137
138| Clinical Scenario | Prosthetic Option | Minimum Implants |
139|------------------|------------------|-----------------|
140| Single tooth | Screw-retained implant crown | 1 |
141| Short-span bounded space (2–3 teeth) | Implant-supported FPD | 2 |
142| Long-span posterior | Implant-supported FPD | 2–3 |
143| Fully edentulous — fixed | Implant-supported fixed full-arch prosthesis (All-on-4/6) | 4 (mandible), 4–6 (maxilla) |
144| Fully edentulous — removable | Implant-retained overdenture | 2 (mandible; gold standard), 4 (maxilla) |
145
146### Cement-Retained vs. Screw-Retained Decision
147
148| Factor | Cement-Retained | Screw-Retained |
149|--------|----------------|---------------|
150| Retrievability | Difficult; cement may not release | Easy; access through screw channel |
151| Excess cement risk | Peri-implant cement disease possible | None |
152| Esthetics | No screw access hole | Screw access hole on occlusal/palatal surface |
153| Passive fit requirement | More forgiving | Demanding; misfit causes screw loosening |
154| Preferred when | Angulation correction needed; anterior esthetics critical | Single implant crowns; posterior; when retrievability desired |
155
156---
157
158## Step 5: Impression Techniques and Digital Workflow
159
160### Impression Material Selection
161
162| Material | Working Time | Accuracy | Best For | Limitation |
163|----------|-------------|----------|----------|-----------|
164| Polyvinyl siloxane (PVS) | 2–4 min | Excellent (< 25 µm) | Crowns, bridges, implant impressions | Hydrophobic; moisture-sensitive |
165| Polyether | 2–3 min | Excellent | Implant impressions, full-arch | Rigid; difficult removal from undercuts; moisture sensitive storage |
166| Alginate (irreversible hydrocolloid) | 1.5–2 min | Moderate | Diagnostic casts, study models, opposing arch | Dimensionally unstable; pour within 30 minutes |
167| Digital intraoral scan | N/A | Excellent (< 20 µm for single units) | Single crowns, short-span bridges, implant scan bodies | Accuracy decreases with full-arch scans; learning curve |
168
169### Digital vs. Conventional Workflow Decision
170
171| Factor | Digital (Intraoral Scan) | Conventional (Impression) |
172|--------|------------------------|--------------------------|
173| Single unit accuracy | Comparable or superior | Established gold standard |
174| Full-arch accuracy | Improving but variable by scanner | More consistent with experienced technique |
175| Patient comfort | Preferred by 90%+ of patients | Gag reflex and discomfort common |
176| Immediate quality check | Yes — review margins on screen before sending | No — defects discovered at lab |
177| Lab communication | STL file + digital shade + photos | Physical impression + shade tab + written Rx |
178| Cost per unit | Lower marginal cost after scanner investment | Material cost per impression |
179
180---
181
182## Checkpoint B: Post-Delivery Alignment (Mandatory)
183
1841. Does the prosthesis meet the treatment plan objectives (function, esthetics, occlusion)?
1852. Was the occlusion verified in centric and excursive movements with articulating paper?
1863. Were radiographs taken to verify fit of fixed restorations and implant components?
1874. Were the patient's home care instructions provided (denture care, bridge flossing, implant hygiene)?
1885. Are follow-up appointments scheduled (adjustments, recall, screw-retorquing for implants)?
189
190---
191
192## Quality Audit
193
194| # | Criterion | Pass / Fail |
195|---|-----------|-------------|
196| 1 | Diagnostic casts or digital scans obtained before treatment planning | |
197| 2 | Kennedy classification documented for removable partial denture cases | |
198| 3 | Abutment teeth assessed for crown-to-root ratio, periodontal status, and endodontic status | |
199| 4 | Face-bow transfer performed for all full-arch and complex occlusion cases | |
200| 5 | Centric relation record verified before prosthetic fabrication | |
201| 6 | VDO assessment method documented with rationale | |
202| 7 | Wax try-in completed for complete dentures and RPDs with patient approval | |
203| 8 | Lab prescription complete with all required elements per ADA/FDA standard | |
204| 9 | Implant position prosthodontically driven with diagnostic wax-up or digital plan | |
205| 10 | Connector dimensions meet minimum cross-section requirements for the material | |
206| 11 | Pontic design appropriate for location (ovate anterior, hygienic posterior) | |
207| 12 | Post-delivery occlusion verified and adjusted | |
208| 13 | Follow-up adjustments scheduled and completed | |
209| 14 | Remake root cause documented when applicable (lab error, impression, communication) | |
210
211---
212
213## Guidelines
214
215- Never skip the diagnostic wax-up or digital design phase for complex cases — it is the single most effective tool for preventing prosthodontic remakes
216- Face-bow transfer is mandatory for any case involving changes to the occlusal plane or VDO; it is strongly recommended for all multi-unit fixed prosthetics
217- Verify centric relation independently of the patient's habitual bite — maximum intercuspation ≠ centric relation in most partially dentate patients
218- For distal extension RPDs, use an altered cast (reline) impression technique to capture the distal extension ridge under functional load
219- Implant placement must be prosthodontically driven — a surgically convenient position that produces an unrestorable or uncleanable restoration is a failure regardless of osseointegration
220- Document every try-in appointment with patient feedback on esthetics, phonetics, and comfort — this protects against post-delivery disputes
221- Screw-retained implant crowns are preferred for single implant restorations due to retrievability and absence of cement risk
222- Track remake rates by case type, provider, and lab — this data drives quality improvement more than any other metric in prosthodontics
CaseMark