Connect AI Docusign

CData Connect AI — DocuSign Skill

⚠️ Prerequisites — load these first

• connect-ai-base skill

Before proceeding, locate and read the connect-ai-base skill. If it is not available in the current environment (not loaded, not enabled, or not installed), stop immediately. Do not proceed with the task. Tell the user that the connect-ai-base skill is required and ask them to install and enable it before continuing.

This skill provides DocuSign-specific guidance for querying DocuSign data through CData Connect AI. It composes on top of the connect-ai-base skill, which handles the discovery workflow, error recovery, SQL dialect, and query naming convention.

Precedence

This skill replaces getInstructions for the DocuSign driver. Do not call getInstructions for DocuSign — the guidance it provides is already incorporated here. Proceed directly to schema discovery (getTables / getColumns) after identifying the DocuSign connection via getCatalogs.

Schema

DocuSign is a single-schema driver. The schema name is DocuSign.

SELECT [EnvelopeId], [EmailSubject], [Status], [CompletedDateTime]
FROM [YourDocuSignConnection].[DocuSign].[Envelopes]
LIMIT 10

Query Process

DocuSign's data is organized around the envelope lifecycle: an envelope contains documents, has recipients who sign, and progresses through states (created → sent → delivered → completed). Most analyses start with envelopes and join outward.

1. Identify the connection — if unknown, call getCatalogs and filter for DRIVER = 'DocuSign'.
2. Tables vs. procedures — query operations use tables (Envelopes, Documents, etc.); creation, modification, and download operations use stored procedures. All tables are read-only views by design — INSERT/UPDATE/DELETE on tables is not supported.
3. Find the envelope first — most workflows begin by locating one or more envelopes by status, date, or recipient. Filter with Status and CompletedDateTime / SentDateTime.
4. Drill into documents or recipients — both Documents and Recipients tables are keyed by parent: queries must include both Type ('envelopes' or 'templates') and Id (envelope or template ID) in the WHERE clause, otherwise the query fails or returns the entire table.
5. Download via procedure — use DownloadDocument (with cloud-compatible parameters; see Stored Procedures below) to retrieve signed content as base64.

Data Model

Key Tables (read-only views)

All DocuSign tables are read-only views. To create or modify data, use the stored procedures below.

• Envelopes — Envelope-level records: status, timestamps, sender, recipients summary
• Templates — Template definitions: name, description, sharing settings, ownership
• Documents — Documents within envelopes or templates. Requires Type + Id filters in WHERE clause
• Recipients — Signers, CC, and other recipient types. Also requires Type + Id filters when scoping to a specific envelope or template (same filter pattern as Documents)
• DocumentTabs — Tab (signature/field) definitions within documents
• Folders — Folder listing, scoped by the FolderType connection property (default: envelope_folders; other valid values: template_folders, shared_template_folders). The agent cannot detect which scope is active from inside Connect AI; if the user asks about folders that don't appear, the connection's FolderType may need to be changed or a different connection used.

Envelope Status values

Envelopes.Status is a lowercase string. Driver-reported values:

• created — Draft, not yet sent
• sent — Recipients notified
• delivered — Recipients have opened
• signed — Recipients have signed (intermediate state on some envelopes; overlaps with completed)
• completed — All required tabs filled and the envelope is closed
• declined — A recipient refused to sign
• voided — Sender canceled the envelope (see VoidedReason for cause)

For "what got signed?" queries, filter on Status IN ('completed', 'signed') if both terminal states matter; for "what's in flight?", filter on Status IN ('sent', 'delivered').

Key Relationships

Important Columns

Envelopes

• EnvelopeId — Unique identifier (primary key)
• EmailSubject — Email subject sent to recipients
• Status — created, sent, delivered, signed, completed, declined, voided
• StatusChangedDateTime — Timestamp of last status change
• SentDateTime — When the envelope was sent
• CompletedDateTime — When all signatures were captured (null until Status = 'completed')
• CreatedDateTime, LastModifiedDateTime, DeclinedDateTime, VoidedDateTime, DeletedDateTime — Lifecycle timestamps
• VoidedReason — Why the envelope was voided (null unless Status = 'voided')
• SenderUserName, SenderEmail, SenderUserId, SenderAccountId — Sender identity (note: column is SenderUserName, not SenderName)
• EnvelopeUri, DocumentsUri, RecipientsUri, CertificateUri — URI fields for API drill-down
• PurgeState — Document/metadata purge lifecycle (unpurged, documents_queued, documents_purged, etc.)

Templates

• TemplateId — Unique identifier
• Name, Description
• Shared — Whether template is shared across the account (BOOLEAN)
• Created, LastModified — Timestamps
• PageCount — Number of pages in the template
• FolderName, FolderId — Folder placement
• OwnerUserName, OwnerEmail, OwnerUserId — Template owner

Documents

• Id — Parent envelope or template ID (required filter)
• Type — 'envelopes' or 'templates' (required filter)
• DocumentId — Document identifier within the parent (e.g., "1", "2") — also part of the key
• DocumentName — Display name
• DocumentType — Type classification (content, summary, etc.)
• Uri — Document URI
• IncludeInDownload — Whether the document is included in combined-document downloads (BOOLEAN)

Recipients

• RecipientId — Unique identifier within the envelope/template (primary key)
• Type — 'envelopes' or 'templates' (filter to scope to a parent)
• Id — Parent envelope or template ID (filter to scope to a parent)
• RecipientType — Role classification (signer, carbon copy, agent, intermediary, certified delivery, etc.)
• Name, Email — Recipient identity
• RoleName — Optional template role (e.g., 'Buyer', 'Seller')
• Status — Recipient-level status
• DeliveredDateTime, SignedDateTime — Timestamps for this recipient
• SigningGroupId, SigningGroupName — When the recipient is a signing group rather than an individual
• RoutingOrder (via CurrentRoutingOrder) — Position in the sequential signing flow

Common Query Patterns

Recently completed envelopes

SELECT [EnvelopeId], [EmailSubject], [Status], [SenderEmail], [CompletedDateTime]
FROM [YourConnection].[DocuSign].[Envelopes]
WHERE [Status] = 'completed'
  AND [CompletedDateTime] >= '2025-01-01'
ORDER BY [CompletedDateTime] DESC
LIMIT 20

Envelopes pending action (sent or delivered, not yet completed)

SELECT [EnvelopeId], [EmailSubject], [Status], [StatusChangedDateTime]
FROM [YourConnection].[DocuSign].[Envelopes]
WHERE [Status] IN ('sent', 'delivered')
  AND [SentDateTime] >= '2025-01-01'
ORDER BY [SentDateTime] DESC
LIMIT 50

Documents within a specific envelope

-- Required: both Type and Id filters
SELECT [DocumentId], [DocumentName], [DocumentType]
FROM [YourConnection].[DocuSign].[Documents]
WHERE [Type] = 'envelopes'
  AND [Id] = '<envelope-id>'

Recipients for a specific envelope

-- Required: both Type and Id filters (same pattern as Documents)
SELECT [RecipientId], [RecipientType], [Name], [Email], [Status], [SignedDateTime]
FROM [YourConnection].[DocuSign].[Recipients]
WHERE [Type] = 'envelopes'
  AND [Id] = '<envelope-id>'

Templates with sharing scope

SELECT [TemplateId], [Name], [Description], [Shared], [Created], [OwnerUserName]
FROM [YourConnection].[DocuSign].[Templates]
WHERE [Shared] = true
ORDER BY [Created] DESC

Voided envelopes with reasons

SELECT [EnvelopeId], [EmailSubject], [SenderEmail], [VoidedDateTime], [VoidedReason]
FROM [YourConnection].[DocuSign].[Envelopes]
WHERE [Status] = 'voided'
  AND [VoidedDateTime] >= '2025-01-01'
ORDER BY [VoidedDateTime] DESC

Stored Procedures

DocuSign uses stored procedures for all create/modify/download operations since tables are read-only. Several procedures accept file content; in cloud Connect AI environments, prefer the base64 @DocumentsAggregate parameter over disk-path (@FileLocation) or stream (@Content) parameters.

DownloadDocument

Downloads a signed document or certificate from an envelope or template.

Cloud-compatible call shape — omit both @DownloadLocation (disk path) and @FileStream (output-stream, cannot pass through MCP); the response returns the document content as base64. @Encoding is an optional parameter to control the encoding of the returned content.

{
  "catalogName": "YourDocuSignConnection",
  "schemaName": "DocuSign",
  "procedureName": "DownloadDocument",
  "parameters": {
    "@Type": "envelopes",
    "@Id": "<envelope-id>",
    "@DocumentId": "<document-id-from-documents-table>"
  }
}

CreateAndSendEnvelope

Creates an envelope and either sends it or saves it as draft.

Cloud-compatible call shape — use @DocumentsAggregate with base64-encoded content. Do not use @FileLocation (disk path) or @Content (InputStream) — neither works in cloud environments.

{
  "catalogName": "YourDocuSignConnection",
  "schemaName": "DocuSign",
  "procedureName": "CreateAndSendEnvelope",
  "parameters": {
    "@Status": "sent",
    "@EmailSubject": "Please sign the agreement",
    "@DocumentsAggregate": "[{\"documentId\": \"1\", \"name\": \"Agreement.pdf\", \"fileExtension\": \"pdf\", \"documentBase64\": \"JVBERi0xLjcKJeLjz9MK...\"}]",
    "@SignersEmail": "signer@example.com",
    "@SignersName": "John Smith",
    "@SignersRecipientId": "1",
    "@SignersRoutingOrder": "1"
  }
}

Set @Status to "created" to save as draft instead of sending immediately. @EmailSubject is required. For multiple signers or carbon-copies, use @SignersAggregate / @CarbonCopiesAggregate (note: different naming from CreateTemplate — see Conventions).

CreateTemplate

Creates a new template. Two patterns: bare template (add documents later), or template + documents in one call via @DocumentsAggregate.

Pattern A — bare template, add documents in a separate call:

{
  "catalogName": "YourDocuSignConnection",
  "schemaName": "DocuSign",
  "procedureName": "CreateTemplate",
  "parameters": {
    "@Name": "Sales Agreement Template",
    "@Description": "Standard sales agreement for new customers",
    "@Shared": "false",
    "@EmailSubject": "Please sign the Sales Agreement"
  }
}

Response returns a new TemplateId.

Pattern B — template with documents in one call (recommended for cloud):

{
  "catalogName": "YourDocuSignConnection",
  "schemaName": "DocuSign",
  "procedureName": "CreateTemplate",
  "parameters": {
    "@Name": "Sales Agreement Template",
    "@Description": "Standard sales agreement",
    "@Shared": "false",
    "@DocumentsAggregate": "[{\"documentId\": \"1\", \"name\": \"Agreement.pdf\", \"fileExtension\": \"pdf\", \"documentBase64\": \"JVBERi0xLjcKJeLjz9MK...\"}]"
  }
}

CreateTemplate accepts only base64 document upload (@DocumentsAggregate) — it has no @FileLocation or @Content parameter. To base a new template on an existing envelope, pass @EnvelopeId. For recipients, use @RecipientsSignersAggregate and @RecipientsCarbonCopiesAggregate (different naming from CreateAndSendEnvelope).

AddDocumentToTemplate — Not currently supported in cloud

AddDocumentToTemplate accepts @FileLocation (server-side disk path, unavailable in cloud) or @Content (Java InputStream, unable to pass through the MCP interface). There is no base64 string alternative for the upload path on this procedure. Treat add-document-to-existing-template as a current limitation in cloud — instead, create the template with documents together via CreateTemplate Pattern B (@DocumentsAggregate). Support for base64 upload on AddDocumentToTemplate is planned but not currently available.

MoveEnvelope

Moves envelopes between folders or to the recycle bin. No file content involved. Pass the destination folder ID; setting the destination to recyclebin deletes or voids the envelope. Consult getProcedureParameters for the current parameter signature.

GetConsentURL

Returns the URL an end user must visit to grant individual consent for the DocuSign integration (OAuth consent flow). Use when bootstrapping or re-authorizing a DocuSign connection. No file content involved.

@DocumentsAggregate parameter reference

Used by CreateTemplate and CreateAndSendEnvelope for cloud-compatible document upload. Requires base64-encoded file content — file paths are not supported.

*One of documentBase64 or remoteUrl must be provided.

Write Operations

DocuSign tables are read-only views. All create/modify/delete operations go through stored procedures — INSERT, UPDATE, and DELETE against tables are not supported by the driver.

If a stored procedure call returns a permissions error, two things to check: (1) the Connect AI connection's readonly setting (CData side — the connection may have execute disabled), and (2) the authenticated DocuSign API user's role permissions in DocuSign.

DocuSign-Specific Conventions

• All tables are read-only views. INSERT, UPDATE, and DELETE on tables are not supported. Use stored procedures (CreateAndSendEnvelope, CreateTemplate, AddDocumentToTemplate, DownloadDocument, MoveEnvelope, GetConsentURL) for all create/modify/download operations.
• Documents and Recipients both require Type + Id filters. Queries without both columns in WHERE clause will fail or return the full table. Type is 'envelopes' or 'templates'; Id is the parent envelope or template ID. This is a broader pattern than just Documents — any time you scope a child entity to a parent, both columns are required.
• Status values are lowercase strings. Filter with 'completed', 'sent', 'delivered', 'created', 'signed', 'declined', 'voided' — never numeric codes. Note that signed and completed are both terminal states for signed envelopes and may overlap in practice; use IN ('signed', 'completed') when querying "what got signed".
• For cloud Connect AI: use @DocumentsAggregate (base64), not @FileLocation or @Content (disk path / InputStream). Cloud environments do not have disk access, and InputStream parameters cannot be passed through the MCP interface. CreateAndSendEnvelope and CreateTemplate support @DocumentsAggregate; AddDocumentToTemplate does not (use CreateTemplate Pattern B as the workaround when starting a template with documents).
• DownloadDocument returns base64 when @DownloadLocation and @FileStream are both omitted. Cloud environments cannot use either parameter; omit both and the response contains the document content as base64. @Encoding is available to control encoding of the returned content.
• Recipient aggregate parameter names differ between procedures. CreateAndSendEnvelope uses @SignersAggregate and @CarbonCopiesAggregate. CreateTemplate uses @RecipientsSignersAggregate and @RecipientsCarbonCopiesAggregate. Confirm the exact parameter name for the procedure you're calling via getProcedureParameters.
• Sequential documentId values in @DocumentsAggregate. When supplying multiple documents in one call, use "1", "2", "3", etc. — these are the IDs within the call, not global document IDs.
• Use explicit date literals for filtering, not DATEADD(). Explicit dates ('2025-01-01') perform better in Connect AI than computed expressions.
• Use CompletedDateTime for "what got signed?" queries; SentDateTime for "what's in flight?" queries. Both are present on Envelopes; pick the one that matches the question semantics. For voided envelopes, VoidedDateTime + VoidedReason is the relevant pair.