Connect AI Quickbooksonline

CData Connect AI — QuickBooks Online Skill

⚠️ Prerequisites — load these first

• connect-ai-base skill

Before proceeding, locate and read the connect-ai-base skill. If it is not available in the current environment (not loaded, not enabled, or not installed), stop immediately. Do not proceed with the task. Tell the user that the connect-ai-base skill is required and ask them to install and enable it before continuing.

This skill provides QuickBooks Online-specific guidance for querying QuickBooks Online data through CData Connect AI. It composes on top of the connect-ai-base skill, which handles the discovery workflow, error recovery, SQL dialect, and query naming convention.

Precedence

This skill replaces getInstructions for the QuickBooksOnline driver. Do not call getInstructions for QuickBooksOnline — the guidance it provides is already incorporated here. Proceed directly to schema discovery (getTables / getColumns) after identifying the QuickBooks Online connection via getCatalogs.

Schema

QuickBooks Online is a single-schema driver. The schema name is QuickBooksOnline.

SELECT * FROM [YourConnection].[QuickBooksOnline].[Accounts] LIMIT 10

Query Process

QuickBooks Online data is structured around master records (Accounts, Customers, Vendors, Items) that anchor transactions (Invoices, Bills, JournalEntries, Purchases) and their line items. Most user questions follow this pattern: find the master record, traverse to its transactions, then aggregate or compute balances.

Step 1: Identify the Master Record

Locate the master record relevant to the question — usually an Account, Customer, or Vendor. Use a LIKE filter on Name/DisplayName plus a type filter where applicable. Master tables are non-transactional, so SELECT DISTINCT is acceptable when no dedicated lookup table exists.

SELECT [Id], [Name], [AccountType], [AccountSubType], [FullyQualifiedName], [Active], [CurrentBalance]
FROM [YourConnection].[QuickBooksOnline].[Accounts]
WHERE [Name] LIKE '%Promotional%' AND [AccountType] = 'Expense'

Step 2: Traverse to Transactions or Line Items

Use the master record's Id to filter transaction line-item tables via the appropriate *Ref foreign key. Always include a TxnDate filter — large QuickBooks instances will time out without one.

SELECT [PurchaseId], [TxnDate], [EntityRef_Name], [Line_Description], [Line_Amount], [TotalAmt]
FROM [YourConnection].[QuickBooksOnline].[PurchaseLineItems]
WHERE [Line_AccountBasedExpenseLineDetail_AccountRef] = '17'
  AND [TxnDate] >= '2024-09-10'
ORDER BY [Line_Amount] DESC
LIMIT 10

Step 3: Compute or Verify Balances

Pull balance fields off the master record, or aggregate from line items when you need a period balance rather than the live balance.

SELECT [Id], [Name], [AccountType], [CurrentBalance], [CurrentBalanceWithSubAccounts]
FROM [YourConnection].[QuickBooksOnline].[Accounts]
WHERE [Id] = '17'

Step 4: Inspect Columns When Needed

When a query refers to fields you haven't validated, run getColumns on the table before issuing the query. QuickBooks Online has many compound column names following the Line_<DetailType>_<Field> pattern that are easy to misspell.

Data Model

Key Tables

Core General Ledger

• Accounts — Chart of accounts with account types, subtypes, and balances
• JournalEntries / JournalEntryLineItems — Manual journal entries with debit/credit details
• CompanyInfo / Preferences — Company settings and accounting configuration

Accounts Payable (AP)

• Vendors — Vendor master data
• Bills / BillLineItems — Vendor invoices with line details
• BillPayments — Payments to vendors
• VendorCredits — Credits from vendors

Accounts Receivable (AR)

• Customers — Customer master data
• Invoices / InvoiceLineItems — Sales invoices with line details
• Payments — Customer payments received
• CreditMemos — Credits issued to customers

Products & Banking

• Items — Product/service catalog with pricing
• Deposits / Transfers — Bank transactions
• Purchases / PurchaseLineItems — Direct purchases (cash/credit card)

Organization & Tax

• Class / Departments — Tracking dimensions for reporting
• TaxCodes / TaxRates — Sales tax configuration
• Terms — Payment terms for AR/AP

Pre-built Report Objects

• BalanceSheetSummaryReport — Complete balance sheet with hierarchy
• CustomerBalanceDetail — Customer aging details
• GetReport stored procedure — May not work in all environments; prefer the report tables above

Key Relationships

Master → Transaction Flow

• Customers → Invoices, Payments, CreditMemos, Estimates, SalesReceipts (via CustomerRef)
• Vendors → Bills, BillPayments, PurchaseOrders, VendorCredits, Purchases (via VendorRef)
• Accounts → Various line items and deposits (via AccountRef fields)
• Items → Various line items (via ItemRef fields)

Each transaction links to its line items: Transaction Id → LineItems ParentId + LineId.

Payment Application

• Invoices ← PaymentLineItems (via Line_LinkedTxn_TxnId)
• Bills ← BillPaymentLineItems (via Line_LinkedTxn_TxnId)

Field Patterns

Keys

• Primary: All tables use Id
• Composite: LineItems use ParentId + LineId (e.g., InvoiceId + LineId)
• Foreign: <Entity>Ref (e.g., CustomerRef, VendorRef)
• Display Names: <Entity>Ref_Name

Line Item Fields

Pattern: Line_<DetailType>_<Field>

• Universal: Line_Amount, Line_Description
• Sales Items: Line_SalesItemLineDetail_ItemRef, Line_SalesItemLineDetail_UnitPrice
• Linked Transactions: Line_LinkedTxn_TxnId, Line_LinkedTxn_TxnType

Status Fields

• Balance: >0 (Open), =0 (Paid)
• Active: 1 (Active), 0 (Inactive)
• EmailStatus: NotSet, NeedToSend, EmailSent
• PrintStatus: NotSet, NeedToPrint, PrintComplete
• GlobalTaxCalculation: TaxExcluded, TaxInclusive, NotApplicable

Account Types

Bank, Accounts Receivable, Accounts Payable, Other Current Asset, Fixed Asset, Credit Card, Other Current Liability, Equity, Income, Expense, Cost of Goods Sold

Common Fields

• Amounts: TotalAmt, Balance, Line_Amount, CurrentBalance, UnappliedAmt, HomeTotalAmt
• Dates: TxnDate, DueDate, MetaData_CreateTime, MetaData_LastUpdatedTime
• Tax: TxnTaxDetail_TotalTax, TxnTaxDetail_TxnTaxCodeRef, Line_SalesItemLineDetail_TaxCodeRef

Important Columns

Accounts

• Id — Internal identifier
• Name — Account display name
• FullyQualifiedName — Full path including parent accounts
• AccountType — High-level type (Bank, Income, Expense, etc.)
• AccountSubType — Detailed type
• Active — 1 for active, 0 for inactive
• CurrentBalance — Live balance (0 for P&L / Income/Expense accounts)
• CurrentBalanceWithSubAccounts — Balance including sub-accounts
• AcctNum — Account number
• ParentRef / ParentRef_Name — Parent account reference

Customers

• Id — Internal identifier
• DisplayName — Display name (use this for human-readable lookups)
• CompanyName — Company name
• Balance — Outstanding balance (DECIMAL)
• BalanceWithJobs — Cumulative balance including subcustomers
• Active — 1 for active, 0 for inactive
• SalesTermRef / SalesTermRef_Name — Payment terms (Customers use SalesTermRef, not TermRef)
• PaymentMethodRef / PaymentMethodRef_Name — Preferred payment method
• PrimaryEmailAddr_Address — Primary email
• PrimaryPhone_FreeFormNumber — Primary phone
• Taxable — Whether the customer is taxable
• ParentRef / ParentRef_Name — Parent customer (for subcustomers and projects)
• Job — Whether this record is a job/subcustomer
• IsProject — Whether this record is a project

Vendors

• Id — Internal identifier
• DisplayName — Display name (use this for human-readable lookups)
• CompanyName — Company name
• Balance — Outstanding balance (VARCHAR — see Conventions)
• Active — 1 for active, 0 for inactive
• TermRef / TermRef_Name — Payment terms (Vendors use TermRef, not SalesTermRef)
• APAccountRef / APAccountRef_Name — Accounts-payable account used for this vendor
• PrimaryEmailAddr_Address — Primary email
• PrimaryPhone_FreeFormNumber — Primary phone
• AcctNum — The vendor's account number with your organization
• Vendor1099 — Whether this vendor receives a 1099-MISC at year end
• TaxIdentifier — Vendor tax ID (TIN)
• CostRate / BillRate — Cost and billing rates for the vendor's services

Invoices / Bills

• Id — Internal identifier
• DocNumber — Document number
• SyncToken — Optimistic-concurrency token; required for VoidInvoice / VoidPayment / VoidSalesReceipt and incremented after any update
• TxnDate — Transaction date
• DueDate — Payment due date
• CustomerRef / CustomerRef_Name — Customer (Invoices)
• VendorRef / VendorRef_Name — Vendor (Bills)
• TotalAmt — Total amount
• Balance — Outstanding balance (0 when paid)
• HomeTotalAmt — Total in home currency
• LineAggregate — XML aggregate of all line items (used for INSERT — see Write Operations)
• BillEmail_Address / BillEmailCc_Address / BillEmailBcc_Address — Email addresses on Invoices. Note that the column name is BillEmail_Address, but the corresponding VoidInvoice procedure parameter is the bare name BillEmail. (SendInvoice uses a different parameter name, EmailAddress, defaulting to BillEmail_Address if omitted — see Stored Procedures.)
• EmailStatus — NotSet, NeedToSend, or EmailSent (Invoices). BillEmail is only required as a procedure parameter when EmailStatus = NeedToSend
• PrivateNote — Internal note; stamped with "Voided" after VoidInvoice / VoidPayment / VoidSalesReceipt

Line-Item Tables (InvoiceLineItems, BillLineItems, JournalEntryLineItems, PurchaseLineItems, etc.)

• <Parent>Id + LineId — Composite key (e.g., InvoiceId + LineId)
• Line_Amount — Line amount
• Line_Description — Line description
• Line_SalesItemLineDetail_ItemRef — Item reference (sales lines)
• Line_SalesItemLineDetail_UnitPrice — Unit price
• Line_AccountBasedExpenseLineDetail_AccountRef — GL account (expense lines)
• Line_JournalEntryLineDetail_AccountRef — GL account (journal entry lines)
• Line_JournalEntryLineDetail_AccountRef_Name — GL account display name (journal entry lines)
• Line_JournalEntryLineDetail_PostingType — Debit or Credit (journal entry lines)
• Line_LinkedTxn_TxnId / Line_LinkedTxn_TxnType — Linked transaction (payment application)

The Line_<DetailType>_<Field> prefix follows the line's detail type: SalesItemLineDetail on Invoices/SalesReceipts/CreditMemos, AccountBasedExpenseLineDetail on Bills/Purchases, JournalEntryLineDetail on JournalEntries. Use the detail type that matches the parent transaction table.

BalanceSheetSummaryReport

• Account — Account or grouping label
• Total — Period total
• RowType — Detail row vs. header/summary row
• RowGroup — Section grouping (Assets, Liabilities, Equity)

Common Query Patterns

Active Accounts by Type

SELECT [AccountType], COUNT(*) AS ActiveAccountCount
FROM [YourConnection].[QuickBooksOnline].[Accounts]
WHERE [Active] = 1
GROUP BY [AccountType]
ORDER BY [AccountType]

Outstanding AR Invoices

SELECT
    [Id],
    [DocNumber],
    [TxnDate],
    [DueDate],
    [CustomerRef_Name],
    [TotalAmt],
    [Balance],
    CASE WHEN [DueDate] < GETDATE() THEN 'Overdue' ELSE 'Current' END AS Status
FROM [YourConnection].[QuickBooksOnline].[Invoices]
WHERE [Balance] > 0
ORDER BY [DueDate], [CustomerRef_Name]
LIMIT 20

Vendor Balances

SELECT
    [Id],
    [DisplayName],
    [CompanyName],
    [Balance],
    [Active],
    [TermRef_Name],
    [AcctNum],
    [PrimaryPhone_FreeFormNumber],
    [PrimaryEmailAddr_Address]
FROM [YourConnection].[QuickBooksOnline].[Vendors]
WHERE [Balance] != '0' AND [Balance] != ''

Balance Sheet Summary

SELECT [Account], [Total], [RowType], [RowGroup]
FROM [YourConnection].[QuickBooksOnline].[BalanceSheetSummaryReport]
ORDER BY [RowGroup]

GL Detail for a Specific Account

SELECT [PurchaseId], [TxnDate], [EntityRef_Name], [Line_Description], [Line_Amount], [TotalAmt]
FROM [YourConnection].[QuickBooksOnline].[PurchaseLineItems]
WHERE [Line_AccountBasedExpenseLineDetail_AccountRef] = '<AccountId>'
  AND [TxnDate] >= '2025-01-01'
ORDER BY [TxnDate], [Line_Amount] DESC
LIMIT 50

Sales by Item

SELECT
    [Line_SalesItemLineDetail_ItemRef_Name] AS Item,
    SUM([Line_Amount]) AS Revenue
FROM [YourConnection].[QuickBooksOnline].[InvoiceLineItems]
WHERE [TxnDate] >= '2025-01-01'
GROUP BY [Line_SalesItemLineDetail_ItemRef_Name]
ORDER BY Revenue DESC
LIMIT 20

Payments Applied to an Invoice

SELECT p.[Id], p.[TxnDate], p.[TotalAmt], pli.[Line_LinkedTxn_TxnId] AS InvoiceId
FROM [YourConnection].[QuickBooksOnline].[Payments] p
INNER JOIN [YourConnection].[QuickBooksOnline].[PaymentLineItems] pli ON p.[Id] = pli.[PaymentId]
WHERE pli.[Line_LinkedTxn_TxnId] = '<InvoiceId>'
  AND pli.[Line_LinkedTxn_TxnType] = 'Invoice'

Stored Procedures

VoidInvoice / VoidPayment / VoidSalesReceipt

Void an existing transaction — the record is retained but its financial impact is reversed. Each procedure requires the target transaction's Id and current SyncToken (fetch from the transaction table first).

SELECT [Id], [SyncToken] FROM [YourConnection].[QuickBooksOnline].[Invoices] WHERE [Id] = '130'

{
  "procedure": "VoidInvoice",
  "parameters": {
    "InvoiceId": "130",
    "SyncToken": "0"
  }
}

SendInvoice

Emails an existing invoice to the customer. Defaults to the invoice's BillEmail_Address if EmailAddress is omitted.

{
  "procedure": "SendInvoice",
  "parameters": {
    "InvoiceId": "130",
    "EmailAddress": "customer@example.com"
  }
}

GetReport

Runs one of QuickBooks Online's report endpoints with QuickBooks-defined parameters (e.g., ReportType=ProfitAndLoss, date macros, filters by department/class/customer). The procedure takes a large number of optional parameters that vary by report type — call getProcedureParameters to inspect them before use. The source's caveat (May not work in all environments) is real: not every QuickBooks tenant has every report enabled.

Prefer the pre-built report tables (BalanceSheetSummaryReport, CustomerBalanceDetail) when they cover the question — they are simpler and more reliable than GetReport.

DownloadPDF

Downloads an Invoice, Sales Receipt, or Estimate as a PDF. In cloud-based Connect AI environments, omit DownloadFolder and FileStream — the procedure returns the file as base64 in the Base64EncodedData column. A DownloadPDF call with only TxnType and TxnID returns the base64-encoded PDF.

{
  "procedure": "DownloadPDF",
  "parameters": {
    "TxnType": "Invoice",
    "TxnID": "130"
  }
}

Response columns: Base64EncodedData (the encoded file), Result (Success), PDFFile (empty when no DownloadFolder was provided). Decode the base64 to retrieve the original PDF for download or display.

DownloadAttachment / DownloadNote

Same cloud-friendly calling pattern as DownloadPDF — omit DownloadFolder and FileStream, supply only AttachmentId, and decode the returned base64 content.

{
  "procedure": "DownloadAttachment",
  "parameters": {
    "AttachmentId": "<id from Attachables>"
  }
}

To find attachment IDs, use the AttachableRefs companion table — it joins attachments to their parent entities and exposes flat columns directly (no XML parsing needed). AttachableRefs already includes FileName, Size, and ContentType, so a join back to Attachables is unnecessary for discovery:

SELECT [AttachableId], [FileName], [Size], [ContentType]
FROM [YourConnection].[QuickBooksOnline].[AttachableRefs]
WHERE [AttachableRef_EntityRef] = '<transaction-id>'
  AND [AttachableRef_EntityRef_type] = 'Invoice'

AttachableRefs and Attachables are companion tables: AttachableRefs exposes the entity-to-attachment relationships with flat columns, while Attachables holds attachment-level metadata. The Attachables table itself exposes the entity reference only as an XML aggregate column (AttachableRefAggregate), so query AttachableRefs instead for any "what's attached to transaction X" question. Use the returned AttachableId value as the input to DownloadAttachment.

UploadAttachment — Not currently supported in cloud

UploadAttachment accepts either FilePath (server-side disk path, unavailable in cloud) or Content as a Java InputStream (cannot be passed through the MCP interface). There is no base64 string alternative yet. Treat file uploads as a current limitation — do not invent parameter names that the driver does not accept. Support for base64 string uploads is planned across CData drivers; check for updates if this capability is needed.

Write Operations

QuickBooks Online supports INSERT and UPDATE through Connect AI where the QuickBooks user's permissions allow it.

LineAggregate for Transactions with Line Items

Several transaction tables — Invoices, Bills, BillPayments, Payments, PurchaseOrders, SalesReceipts, RefundReceipts — accept a LineAggregate column on INSERT instead of separate line-item rows. LineAggregate is an XML payload describing all line items for the transaction.

Before writing an INSERT against one of these tables for the first time, run a small SELECT (around 5 rows) to inspect the actual XML shape LineAggregate produces for that table, then mirror that structure in your INSERT.

SELECT TOP 5 [Id], [LineAggregate]
FROM [YourConnection].[QuickBooksOnline].[Invoices]

Sample Invoice INSERT:

INSERT INTO [YourConnection].[QuickBooksOnline].[Invoices]
    ([CustomerRef], [TxnDate], [LineAggregate])
VALUES
    ('6342',
     '2025-09-23',
     '<Line><DetailType>SalesItemLineDetail</DetailType><Amount>125.00</Amount><SalesItemLineDetail><ItemRef>15</ItemRef><UnitPrice>125.00</UnitPrice><Qty>1</Qty></SalesItemLineDetail><Description>Manchester United Away Jersey</Description></Line><Line><DetailType>SalesItemLineDetail</DetailType><Amount>0.00</Amount><SalesItemLineDetail><ItemRef>2</ItemRef><UnitPrice>0.00</UnitPrice><Qty>1</Qty></SalesItemLineDetail><Description>Hours</Description></Line><Line><DetailType>SalesItemLineDetail</DetailType><Amount>75.60</Amount><SalesItemLineDetail><ItemRef>1</ItemRef><UnitPrice>75.60</UnitPrice><Qty>1</Qty></SalesItemLineDetail><Description>Sales</Description></Line>')

Update an Existing Record

UPDATE [YourConnection].[QuickBooksOnline].[Customers]
SET [PrimaryEmailAddr_Address] = 'new@example.com'
WHERE [Id] = '6342'

Write Access Control

If write operations are blocked, the Connect AI connection may be set to readonly. Guide the user to their Connect AI connection settings to ensure write access is enabled. Beyond that, the QuickBooks user authorized for the connection must have permission for the specific operation in QuickBooks.

QuickBooks Online-Specific Conventions

• VARCHAR numeric fields: A handful of numeric fields are stored as VARCHAR — confirmed cases: Vendors.Balance and the TxnTaxDetail_TotalTax column on transaction tables (Invoices, Bills, line-item tables). Most other numeric fields (TotalAmt, Line_Amount, Customers.Balance, Invoices.Balance, Bills.Balance, Accounts.CurrentBalance) are DECIMAL and do not need casting. When you encounter a VARCHAR numeric field, use CAST(field AS DECIMAL) for comparisons, sorting, and aggregation — plain > or SUM() can return wrong results.
• NULL vs empty string: Some optional fields contain '' (empty string) instead of NULL. Filter both when checking for missing values: WHERE [Field] IS NOT NULL AND [Field] != ''.
• CurrentBalance is 0 for P&L accounts: Income and Expense accounts always report CurrentBalance = 0. For P&L figures, aggregate line items from the relevant transaction tables or use the report tables.
• Filter master data by [Active] = 1: Vendors, Customers, Accounts, Items, etc. retain inactive records. Always filter for active records unless the question specifically asks about inactive ones.
• Date format: Use 'YYYY-MM-DD' for date literals in WHERE clauses.
• Date filters are essential: Transaction tables grow large fast — always filter by TxnDate (or MetaData_LastUpdatedTime for change tracking) on Invoices, Bills, Purchases, Payments, JournalEntries, and their line-item tables to avoid timeouts.
• LineAggregate for inserts: Transaction tables with line items expect an XML LineAggregate column on INSERT — sample the column from existing rows before writing one.
• Composite line-item keys: Line-item tables use <Parent>Id + LineId as the composite key — Id alone does not uniquely identify a line.
• *Ref vs *Ref_Name: *Ref holds the ID used for joins and inserts; *Ref_Name holds the human-readable display name. Always join on *Ref.
• Report objects vs GetReport procedure: The pre-built report tables (BalanceSheetSummaryReport, CustomerBalanceDetail) are more reliable than the generic GetReport stored procedure, which is not available in all environments.