Configuring Connections

Configuring Connections

A connection is a credential and configuration object that lets Celigo communicate with an external system. Every export and import references a connection via _connectionId. Connections must be created before the resources that use them.

Concerns when configuring a connection:

• Authentication -- choosing the right auth method (OAuth, token, basic, key-pair, certificate, etc.) and providing the correct credentials
• Concurrency -- how many parallel requests Celigo can make to the target system (concurrencyLevel). Can be shared across connections via _borrowConcurrencyFromConnectionId
• Health monitoring -- ping configuration to verify connectivity and detect credential expiration (offline status)
• Pre-built connectors -- HTTP connectors and trading partner connectors provide pre-configured auth, base URLs, and endpoint definitions for 550+ applications
• Debug logging -- temporary debug mode to capture raw request/response data for troubleshooting
• iClients -- reusable OAuth credential stores (client ID/secret, scopes, token endpoints) shared across connections. See iClients section below.

Used across flows, APIs, and tools.

Connection Types

Quick Reference

Connection Type Decision Matrix

Which of the two HTTP rows applies is determined by search, not preference: check for a pre-built connector first (celigo http-connectors list) and use the manual row only when no connector exists or it doesn't fit -- see Check for a pre-built connector and global iClient.

Minimum Required Fields

Every connection needs at minimum: name, type, and the type-specific config block.

Which Schemas to Read

Rule: Always read the base request.yml for shared fields, then the type-specific schema for the connection type you are configuring.

Schema Index

Connection schemas (in references/schemas/):

• Base fields (all connections): request.yml
• Response shape: response.yml
• HTTP: http.yml
• NetSuite: netsuite.yml
• Salesforce: salesforce.yml
• RDBMS: rdbms.yml
• JDBC: jdbc.yml
• MongoDB: mongodb.yml
• DynamoDB: dynamodb.yml
• FTP: ftp.yml
• S3: s3.yml
• Filesystem: filesystem.yml
• AS2: as2.yml
• VAN: van.yml
• MCP: mcp.yml
• Wrapper: wrapper.yml
• REST (legacy): rest.yml
• OAuth: oauth.yml
• JWT: jwt.yml
• SSL: ssl.yml

iClient schemas (in references/iclient-schemas/):

• Base fields: request.yml
• Response shape: response.yml
• OAuth2 providers: oauth2.yml
• NetSuite: netsuite.yml
• Salesforce: salesforce.yml
• eBay: ebay.yml

Related Skills

• configuring-exports > Quick Reference -- choosing the right export adaptor type and schema for a data source
• configuring-imports > Quick Reference -- choosing the right import adaptor type and schema for a data destination
• building-flows > How to Build a Flow -- wiring connections, exports, and imports into a flow pipeline

How to Build a Connection

1. Identify the target system

What system do you need to connect to? This determines the connection type, auth method, and configuration shape.

2. Name the connection after the system, not the operation

Connection names should describe the system and environment -- not what a specific flow does with them. Connections are shared across exports, imports, and flows, so operation-specific names become misleading as soon as a second resource uses the same connection.

If the account has multiple environments or instances of the same system, include the distinguishing detail (store name, environment, account ID). Otherwise just the system name is fine.

3. Check for existing connections

Before creating a new connection, check what already exists in the account and marketplace:

# Search the account for existing connections by name or keyword
celigo account search "<application-name>"

# Show what uses a connection (exports, imports)
celigo account dependencies connection <id>

# Find offline connections used by enabled flows, orphaned connections
celigo account lint

# Search marketplace for pre-built integration templates
celigo templates marketplace

# Preview a template's connection model
celigo templates preview <id> --model Connection

# List all connections
celigo connections list

# Filter by type
celigo connections list | grep -i "<application-name>"

The account index auto-refreshes when stale (>4 hours). Force a fresh snapshot with celigo account snapshot.

Reusing an existing connection avoids duplicate credentials and shares concurrency.

When presenting connection choices to the user, filter out connections that are offline: true or have status: "offline". Only show online/active connections as options. If ALL matching connections are offline, mention that and let the user decide whether to proceed with an offline connection or fix connectivity first.

4. Check for a pre-built connector and global iClient

For HTTP connections, search for a pre-built connector before configuring manually. Configure by hand only when no connector exists for the application or the connector doesn't support the auth scheme or endpoints you need:

# Search HTTP connectors (550+ apps: Shopify, Stripe, HubSpot, etc.)
celigo http-connectors list
celigo http-connectors get <id> --full    # see auth config, endpoints, resources

# Search trading partner connectors (EDI, AS2, VAN)
celigo tp-connectors list

If an HTTP connector exists, set http._httpConnectorId and http._httpConnectorVersionId on the connection. The connector provides auth templates, base URL, and pre-built endpoints.

Check for a global iClient. Many pre-built connectors ship with a global (Celigo-managed) iClient -- a shared OAuth app registration that handles authorization out of the box (e.g., Microsoft Business Central, Shopify, Google). When a global iClient is available:

• Use it by default. Set http.auth.type: "oauth" with http.auth.oauth.useIClientFields: true and http._iClientId pointing to the global iClient ID.
• Do not fall back to static bearer token auth (auth.type: "token") just because you don't have live credentials yet. The connection should be created with the correct OAuth auth shape and saved as offline: true.
• Only create a custom iClient if the customer has their own app registration (e.g., their own Azure AD app, Shopify private app) or if the global iClient doesn't have the required scopes/consent for their tenant.

To find existing global iClients, check any working connection in the account that uses the same connector -- its http._iClientId will reference the global iClient. You can also inspect the connector's auth configuration via http-connectors get <id> --full.

5. Choose the type, auth method, and build

Use the Connection Types table above to pick the type value and open the matching schema for available auth options and required fields.

Every connection needs at minimum: name, type, and the type-specific config block (http{}, netsuite{}, ftp{}, etc.).

Offline connections must use the correct auth shape. When creating a connection without live credentials (e.g., demo, placeholder, or pre-staging), always configure the full auth structure the connection will ultimately use -- OAuth type, iClient reference, grant type, etc. -- and save with offline: true. This ensures the connection can be authorized in place later without reconfiguration. Never substitute static token auth as a shortcut for an OAuth connection.

6. Test the connection

celigo connections ping <id>

For OAuth connections, authorize via browser first: celigo connections authorize <id>.

CLI Commands

# CRUD
celigo connections list
celigo connections get <id>
celigo connections create < connection.json
celigo connections update <id> < connection.json
celigo connections delete <id>

# Test connectivity
celigo connections ping <id>

# OAuth authorization (opens browser for OAuth flow)
celigo connections authorize <id> [--timeout <seconds>] [--print-url]

# Debug
celigo connections enable-debug <id> [--duration <minutes>]
celigo connections disable-debug <id>
celigo connections debug-logs <id>

# Integration-level connection management
celigo integrations register-connections <integrationId> <connectionIds...>
celigo integrations deregister-connections <integrationId> <connectionIds...>

# Replace connection across a flow's exports/imports
celigo flows replace-connection <flowId> <oldConnectionId> <newConnectionId>

Note: connections set and iclients set only apply PATCH-whitelisted fields (e.g. name, debugDate, debugUntil; iclients also oauth2.failPath). PATCH never re-sends the masked credentials GET returns as "******", so it's safe. Any non-whitelisted field errors instead of falling back to a full PUT that would overwrite stored secrets -- use update (which guards against submitting masked values) for those.

Pre-Submit Checklist

Before creating or updating a connection, verify:

• name describes the system/environment, not a specific operation (e.g., "Shopify - my-store", not "Shopify - Customer Upsert")
• type matches the target system (see Connection Types)
• Type-specific config block is present (http{}, netsuite{}, rdbms{}, etc.)
• Auth credentials are real values, not masked "******" from a prior GET
• For HTTP: a pre-built connector search was done (celigo http-connectors list); manual config only because none exists or it doesn't fit
• For HTTP connectors: http._httpConnectorId and http._httpConnectorVersionId are set
• For OAuth connections: uses global iClient if connector provides one; custom iClient only when needed
• For OAuth connections: auth.type is "oauth" (not "token" with a static bearer), even if saving offline: true
• For NetSuite: netsuite.authType is token-auto (not deprecated basic)
• For RDBMS: host, port, database, user, and password are all provided

Gotchas

These apply to both connections and iClients unless noted:

1. GET masks credentials. Passwords, tokens, and secrets are returned as "******". Never round-trip a GET response back to PUT without restoring the real values. This is why set only PATCHes whitelisted non-credential fields, and update refuses a payload still containing "******" unless you pass --force.
2. PUT erases omitted fields. Always GET first, modify, then PUT the complete object.
3. OAuth connections need browser authorization after creation. Creating via API sets up the shell, but tokens come from a browser redirect. Use celigo connections authorize <id>.

Connections only:

4. rest type is legacy. Always use type: "http" for new REST connections.
5. NetSuite basic auth is deprecated. Use token-auto (Celigo-managed TBA) for new connections.
6. Debug logs are connection-scoped. Enabling debug captures request/response data for all flows using that connection.
7. _borrowConcurrencyFromConnectionId shares slots. The borrowing connection's concurrencyLevel is ignored.
8. Name connections after the system, not the operation. Connections are shared across resources. "Shopify - my-store" is correct; "Shopify - Customer Upsert" is not.
9. Use the global iClient for OAuth connectors. When a pre-built connector ships with a global iClient, use it with auth.type: "oauth" -- do not substitute auth.type: "token" with a static bearer token, even for offline/dummy connections. Static tokens expire and produce the wrong auth shape.

Common Errors

Credential Discipline & Runtime Behavior

How connections behave once they exist -- the credential rules every update must follow, and the runtime model (state, queues, rate-limit recovery, debug) to reason about when troubleshooting.

Never accept or echo real credentials in chat

Celigo requires the external system's credentials to be re-submitted on every connection update -- a security guardrail proving the person making the change controls the target system, not a UI quirk. Because chat conversations are logged in clear text, never accept, request, or echo a real credential (API key, OAuth token or client secret, SFTP password, cert key, AS2 cert pair) in chat.

• When updating a connection programmatically, send the credential fields as dummy/placeholder values so the non-credential changes the user asked for (rename, URL, concurrency) save normally. Then tell the user to finish the change by re-entering their real credentials in the Celigo UI. Signal this on every update, including trivial ones (renames, description tweaks) -- the user shouldn't have to remember which updates need a manual follow-up.
• If a user pastes a real credential, treat it as compromised, full stop. The only correct mitigation: (1) rotate the credential at the external system itself -- regenerate the API key, reset the OAuth grant, rotate the SFTP password, revoke and reissue the cert pair -- then (2) update the connection in the Celigo UI with the rotated value. This holds no matter how trivial the credential looks (a sandbox key, a stale password, a client secret the user thinks is unused).

The credentials live on the durable connection record; the runtime auth state (token still valid, cert still trusted, system reachable) is separate and ephemeral.

Online / offline -- fix the shared connection, not each flow

A connection is online (credentials valid, target reachable, every dependent can run) or offline (token expired, API changed, network unreachable, credentials rotated without updating Celigo, cert expired). The connection resource exists in either state -- going offline doesn't delete it. Probe it with celigo connections ping <id>.

When a user reports "my flow is failing" and the root cause is the connection, fix the shared connection, not each dependent flow. One connection backs many consumers (flows, APIs, Tools, AI agents); every dependent recovers the moment the connection is back online. That one-fix-all-recover payoff is the whole point of the connection abstraction.

Connections as concurrency queues -- throughput and governance

Every connection is backed by its own dedicated FIFO queue. Records routed through a connection land in its queue and process first-in, first-out. Two flows using the same connection share one queue; a flow that touches multiple connections lands in multiple queues (one per connection). This is the mental model for throughput, rate limits, and "why are my flows competing for capacity?"

concurrencyLevel sets how many messages from the queue process in parallel -- match it to the external system's published API governance limit (if the destination permits 25 parallel requests, set concurrencyLevel: 25 to run at the ceiling without going over). Queue depth is connection-level, owned collectively by every consumer -- never attribute a deep queue to a single flow, and treat a deep queue as an explanation (work ahead in line), not a defect.

Throughput symptoms almost always point back to the connection, not the flow:

Auto-recover rate-limit errors

New connections enable auto-recover rate limit errors by default, with a per-adaptor target concurrency (HTTP default 25, FTP default 1, tunable per connection). On a rate-limit error (429 or equivalent), instead of piling errors into Open errors the connection throttles itself and recovers:

1. Drop effective concurrency to 1 and wait ~1 minute before retrying the errored record.
2. Each further rate-limit error doubles the wait (2, 4, 8, ... up to 1024 minutes) -- up to eleven attempts at concurrency 1, roughly 34 hours of accumulated backoff.
3. On a successful retry, walk concurrency back up toward the target (1 -> 2 -> 4 -> 8 -> ...). A rate-limit error mid-recovery restarts the dance from concurrency 1.
4. If the full sequence still hits rate-limit errors, the platform auto-disables the setting on the connection -- it must be re-enabled manually, and until then rate-limit errors flow into Open errors like any other failure.

Recovered records land in the Resolved errors tab (not Open errors), and the concurrency adjustments appear in the connection's audit log. Mid-run, disabling auto-recover cancels recovery (the flow continues at the target concurrency; unresolved rate-limit errors go to Open errors), and changing the target concurrency takes effect immediately for subsequent retries.

Borrowing concurrency

When multiple connections point at the same system but the system enforces an account-wide rate limit, have them share one budget: set _borrowConcurrencyFromConnectionId on each borrowing connection to point at a parent, and set concurrencyLevel on the parent to the system's limit. All borrowers draw from that shared budget (a borrower's own concurrencyLevel is ignored). This fits the "partition by identity" pattern -- different credentials or teams, one global API limit. A borrowing connection has no auto-recover toggle of its own; the parent connection's auto-recover setting governs.

Wire-level debug logging

When a flow fails in ways online/offline doesn't explain -- the target is reachable and credentials look fine, but records are rejected with cryptic errors or the wrong data comes back -- capture the raw traffic with the connection debugger:

celigo connections enable-debug <id> [--duration <minutes>]   # 15 min default, up to ~1 hour
celigo connections debug-logs <id>
celigo connections disable-debug <id>

• Captures every request/response through the connection with sensitive fields masked. Each entry carries an ISO date, a UUID pairing a request to its response, the resource type and id using the connection, and the request or response body (match a request to its response by shared UUID).
• Logs appear only once data is actually moving -- not for flows queued but not yet processing. Captured logs remain available for 24 hours (or until cleared).
• Debug is connection-scoped -- it captures traffic for every flow using that connection.
• Not supported for DynamoDB, MongoDB, or wrapper connectors; fall back to test-mode flow runs, mock data, or the destination's own logs.
• The extra per-request capture adds noticeable lag on high-volume flows (millions of records). Enable it briefly during a representative test run, or narrow the source export's criteria so a small set exercises the connection inside the debug window, then turn it off so the flow runs at full speed.

iClients (OAuth Credential Stores)

An iClient is a reusable OAuth credential store -- it holds the client ID, client secret, scopes, and provider-specific OAuth configuration that can be shared across multiple connections. Instead of embedding OAuth app credentials directly in each connection, you create one iClient and reference it.

When Do You Need an iClient?

The rule of thumb: if a global iClient exists for the connector, use it. If the connection uses OAuth and you're bringing your own app registration, create a custom iClient.

How iClients Relate to Connections

┌──────────────┐       _iClientId        ┌──────────────┐
│  Connection   │ ──────────────────────► │   iClient    │
│  (HTTP/SF/NS) │                         │  (OAuth app) │
└──────────────┘                          └──────────────┘
                                                │
                                    stores clientId, clientSecret,
                                    scopes, token/refresh/revoke
                                    endpoints, provider config

• Connection owns the concurrency, health monitoring, debug logging, and runtime config
• iClient owns the OAuth app registration credentials and flow configuration
• Multiple connections can share one iClient (e.g., multiple connections to the same OAuth app)

Reference fields on connections

• HTTP connections: http._iClientId -- when http.auth.type is oauth and oauth.useIClientFields: true
• NetSuite connections: netsuite._iClientId -- when authType: "token-auto" (Celigo-managed TBA)
• Salesforce connections: uses iClient when packagedOAuth: false (custom Connected App)
• MCP connections: mcp._iClientId -- for OAuth-based MCP server auth

How to Build an iClient

1. Determine the provider

The provider field selects which auth configuration is used:

See request.yml for the full provider enum.

2. Build the iClient

Use the schema for the matching provider. All schemas are in references/iclient-schemas/:

Every iClient needs at minimum: provider and the matching provider-specific config block (oauth2{}, netsuite{}, salesforce{}, etc.).

3. Reference from the connection

After creating the iClient, set the _iClientId on the connection (http._iClientId, netsuite._iClientId, mcp._iClientId).

For OAuth connections, authorize via browser: celigo connections authorize <connectionId>.

custom_oauth2 and JWT-Based Auth

custom_oauth2 -- the generic OAuth2 escape hatch

Pick a named provider whenever one matches the system -- it carries provider-aware defaults and the correct sub-config shape. Reach for custom_oauth2 only for OAuth2 APIs with no named provider; because nothing is preset, you supply the flow details yourself:

• clientId / clientSecret -- the registered app's credentials
• scope (+ scopeDelimiter) and redirectUri (must match the callback registered with the provider exactly)
• grantType -- authorization-code, client-credentials, or password
• token / refresh / revoke endpoints, plus clientCredentialsLocation (send client credentials in a basic-auth header vs the request body)
• PKCE settings where the provider requires them
• validDomainNames -- required for custom_oauth2; list each unique domain from your auth/token/revoke URLs (host only, no scheme or path)

See oauth2.yml for the full field set.

JWT-based auth

Some providers require a JWT assertion as part of the token request. Set enableJWT: true and populate the jwt block on the iClient; for Salesforce JWT bearer, supply the privateKey (see salesforce.yml). Handlebars templates reference the signed token via {{{iClient.jwt.token}}}. The clientSecret and private key are credentials -- the Credential Discipline & Runtime Behavior rules apply: never paste them in chat.

One iClient, Many Connections

An iClient is the app registration, not an identity. It holds the app's clientId / clientSecret, while the per-user access and refresh tokens produced by actually running the OAuth flow live on the connection, not the iClient. That's why the default is one iClient, many connections -- register the app once, store it as an iClient, and point every connection that should authenticate as that app at it via _iClientId. Ten Salesforce connections for ten different orgs can all share one iClient: same app, ten distinct authenticated identities.

Minting a separate iClient per connection duplicates the same clientId / clientSecret and multiplies rotation work. Reach for distinct iClients only when connections genuinely need different registered apps -- different developer accounts, different scope grants, separate rate-limit pools, or a hard separation between environments where each has its own provider-side app.

Update an iClient in Place vs Create a New One

• Secret rotated (the provider reissued it, or it leaked) -> update the existing iClient in place. Every connection authenticating through it picks up the new secret with no retargeting.
• The app itself changed (a different registered app, a different developer account, a move to a new client ID) -> create a new iClient. The old one stays usable for connections still on the old app; connections migrate to the new one as needed.

Smell test (mirrors connections): renewing the same app's credentials -> update in place; switching to a different app -> new iClient.

iClient CLI Commands

# CRUD
celigo iclients list
celigo iclients get <id>
celigo iclients create < iclient.json
celigo iclients update <id> < iclient.json
celigo iclients delete <id>

iClient Gotchas

1. _httpConnectorId is immutable. Once an iClient is linked to an HTTP connector, it cannot be changed. Create a new iClient if you need a different connector.
2. provider determines valid fields. Setting provider: "netsuite" means the netsuite block is used; provider: "custom_oauth2" means the oauth2 block. Mismatching provider and config block silently ignores the wrong block.
3. Handlebars references use {{{iClient.fieldName}}} to access values stored in encrypted or unencrypted objects. For JWT: {{{iClient.jwt.token}}}.
4. validDomainNames is required for custom OAuth2. Provide each unique domain from your auth/token/revoke URLs (without scheme or path).
5. Deleting an iClient breaks referencing connections. Connections that reference a deleted iClient will fail to authorize. Check for references before deleting.
6. Editing a shared iClient's credentials affects every referencing connection. Because one iClient backs many connections, rotating its clientSecret re-points OAuth for all of them at once. Confirm which connections depend on the iClient before changing it.