Linux Performance Tuner

Linux Performance Tuner

Overview

Generates a tuned sysctl configuration, I/O scheduler settings, CPU governor settings, and workload-specific optimizations based on the user's hardware and use case. Always measures before tuning — includes profiling commands to find the actual bottleneck before applying any change.

Rule: Profile first, tune second. Never apply tuning blind. Always identify the bottleneck first.

Language: Respond in the user's language. Config files and scripts in English.

When to Use

• User reports high load, slow response times, or poor throughput
• User wants to optimize for a specific workload (web, database, HPC, containers)
• User wants to tune kernel parameters for their server
• User asks about CPU governor, I/O scheduler, huge pages, NUMA
• User wants to profile where their system is spending time
• User asks "why is my server slow?"

When NOT to Use

• User wants to harden the server → linux-security-hardener
• User wants to monitor ongoing performance → linux-monitoring-setup
• User wants to tune Docker/container resource limits → docker-compose-writer

Step 1 — Find the Bottleneck First

Before generating any tuning, output these diagnostic commands and ask the user to share results if they haven't already:

# ── 60-second performance snapshot ──────────────────────────
# CPU, memory, I/O, network — one command each

# 1. Overall system health
uptime                          # load averages (1, 5, 15 min)
vmstat 1 10                     # CPU/memory/swap/io per second (10 samples)

# 2. CPU breakdown
mpstat -P ALL 1 5               # per-core CPU usage (5 samples)
top -b -n1 | head -20           # top processes by CPU

# 3. Memory
free -h                         # RAM + swap usage
cat /proc/meminfo | grep -E "MemTotal|MemFree|MemAvailable|Buffers|Cached|SwapUsed"

# 4. I/O
iostat -xz 1 5                  # per-device I/O stats (5 samples)
iotop -bo -n5 2>/dev/null       # top I/O processes

# 5. Network
sar -n DEV 1 5 2>/dev/null      # per-interface throughput
ss -s                           # socket statistics summary
netstat -s | grep -E "failed|error|overflow|retran" 2>/dev/null

# 6. Identify biggest CPU consumers
ps aux --sort=-%cpu | head -10

# 7. Check for kernel errors
dmesg -T | tail -30 | grep -iE "error|warn|oom|throttl"

Step 2 — Identify Workload Type

If the bottleneck or workload type isn't clear, present options:

What is this server's primary workload?

1. Web / Application server (nginx, Apache, Node.js, Python, Ruby) 2. Database server (PostgreSQL, MySQL, Redis, MongoDB) 3. High-throughput networking (load balancer, proxy, high-connection count) 4. General purpose / mixed (VPS, dev server, multiple services) 5. Compute / HPC (CPU-intensive batch jobs, scientific computing) 6. Storage / I/O heavy (file server, NFS, large file processing)

Tuning Profiles

Profile 1 — Web / Application Server

CPU:

# Apply immediately (current session only):
cpupower frequency-set -g performance
# Or without cpupower:
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do
  echo performance > "$cpu"
done

# To persist across reboots, create a systemd service:
cat > /etc/systemd/system/cpu-performance.service << 'EOF'
[Unit]
Description=Set CPU governor to performance
After=multi-user.target

[Service]
Type=oneshot
ExecStart=/bin/sh -c 'for f in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do [ -w "$f" ] && echo performance > "$f"; done; true'
# Note: Some systems (ARM, VMs, certain kernels) may not expose cpufreq — exit 0 always
RemainAfterExit=yes

[Install]
WantedBy=multi-user.target
EOF
systemctl enable --now cpu-performance.service

Kernel (/etc/sysctl.d/99-webserver.conf):

# File descriptor limits
fs.file-max = 2097152

# Network — connection handling
net.core.somaxconn = 65535
net.core.netdev_max_backlog = 65535
net.ipv4.tcp_max_syn_backlog = 65535

# TCP performance
net.ipv4.tcp_fin_timeout = 10
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_keepalive_time = 60
net.ipv4.tcp_keepalive_intvl = 10
net.ipv4.tcp_keepalive_probes = 6
net.ipv4.tcp_slow_start_after_idle = 0

# TCP buffers
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_rmem = 4096 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216

# Congestion control (BBR — better throughput on high-bandwidth links)
# Note: BBR can increase latency on lossy or congested networks.
# Fallback: net.ipv4.tcp_congestion_control = cubic
net.ipv4.tcp_congestion_control = bbr
net.core.default_qdisc = fq

# Memory
vm.swappiness = 10
vm.dirty_ratio = 15
vm.dirty_background_ratio = 5

ulimits (/etc/security/limits.d/99-webserver.conf):

*    soft nofile 65536
*    hard nofile 262144
*    soft nproc  65536
*    hard nproc  65536

Profile 2 — Database Server

Kernel (/etc/sysctl.d/99-database.conf):

# Shared memory for PostgreSQL / MySQL
kernel.shmmax = 68719476736     # 64 GB — set to 75% of RAM
kernel.shmall = 4294967296

# Huge pages (PostgreSQL benefit significantly)
vm.nr_hugepages = 512           # = shared_buffers_bytes / 2097152
                                # Example: 4GB shared_buffers → 4096MB / 2MB = 2048 huge pages
# Check current: grep HugePages /proc/meminfo

# Reduce swap use — databases need RAM, not swap
vm.swappiness = 1
vm.dirty_ratio = 10
vm.dirty_background_ratio = 3
vm.overcommit_memory = 2        # prevent OOM kills of DB processes
vm.overcommit_ratio = 80

# Network for DB connections
net.core.somaxconn = 4096
net.ipv4.tcp_keepalive_time = 300

I/O scheduler (critical for database performance):

# For SSDs / NVMe — use none (noop) or mq-deadline
for disk in /sys/block/sd* /sys/block/nvme*; do
  if [[ -f "${disk}/queue/scheduler" ]]; then
    echo mq-deadline > "${disk}/queue/scheduler"   # SSD
    # echo none > "${disk}/queue/scheduler"         # NVMe
    echo 0 > "${disk}/queue/rotational" 2>/dev/null || true
    echo 256 > "${disk}/queue/nr_requests" 2>/dev/null || true
  fi
done

# For spinning HDDs — use bfq (best fairness) or mq-deadline
# echo bfq > /sys/block/sda/queue/scheduler

PostgreSQL-specific tuning (postgresql.conf guidance):

Profile 3 — High-Throughput Networking

Kernel (/etc/sysctl.d/99-network.conf):

# Maximize socket buffers
net.core.rmem_max = 134217728
net.core.wmem_max = 134217728
net.core.rmem_default = 262144
net.core.wmem_default = 262144
net.ipv4.tcp_rmem = 4096 262144 134217728
net.ipv4.tcp_wmem = 4096 262144 134217728

# Connection queue
net.core.somaxconn = 65535
net.core.netdev_max_backlog = 300000
net.ipv4.tcp_max_syn_backlog = 65535

# Connection reuse
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_fin_timeout = 5
net.ipv4.ip_local_port_range = 1024 65535

# BBR congestion control
net.ipv4.tcp_congestion_control = bbr
net.core.default_qdisc = fq

# Interrupt coalescing — reduce CPU overhead per packet
# (set via ethtool, driver-dependent)
# ethtool -C eth0 rx-usecs 50 tx-usecs 50

NIC offloading:

# Enable hardware offloading (reduces CPU load for checksums)
ethtool -K eth0 gso on gro on tso on tx on rx on

# For high packet rates — tune interrupt affinity
# Spread NIC interrupts across CPU cores
cat /proc/interrupts | grep eth0
# Then pin each queue to a different CPU

Profile 4 — General Purpose VPS

Kernel (/etc/sysctl.d/99-general.conf):

# Balanced settings for mixed workloads
vm.swappiness = 10
vm.dirty_ratio = 20
vm.dirty_background_ratio = 5

net.core.somaxconn = 8192
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_fin_timeout = 15
net.core.rmem_max = 8388608
net.core.wmem_max = 8388608

# Kernel hardening that doesn't hurt performance
kernel.randomize_va_space = 2
fs.file-max = 1048576

Profile 5 — Compute / HPC

# Disable NUMA balancing if workload is NUMA-aware
echo 0 > /proc/sys/kernel/numa_balancing

# Disable transparent huge pages for consistent latency
echo never > /sys/kernel/mm/transparent_hugepage/enabled
echo never > /sys/kernel/mm/transparent_hugepage/defrag

# Isolate CPUs for latency-sensitive processes
# Add to kernel cmdline: isolcpus=2,3,4,5 nohz_full=2-5 rcu_nocbs=2-5
# ⚠️  Kernel cmdline changes require a reboot to take effect:
#   1. Edit /etc/default/grub → add params to GRUB_CMDLINE_LINUX
#   2. Run: update-grub && reboot
#   Verify after reboot: cat /proc/cmdline

# Set process CPU affinity
taskset -cp 2-5 <pid>

# Set real-time priority
chrt -f 50 /path/to/realtime-process

Profile 6 — Storage / I/O Heavy

For file servers, NFS, object storage, and large file processing workloads.

I/O scheduler (critical — use BFQ for HDDs, mq-deadline for SSDs):

# For spinning HDDs — BFQ provides best fairness under mixed load
echo bfq > /sys/block/sda/queue/scheduler
echo 256 > /sys/block/sda/queue/nr_requests

# For SSDs/NVMe
echo mq-deadline > /sys/block/nvme0n1/queue/scheduler
echo 64 > /sys/block/nvme0n1/queue/nr_requests

# Check which scheduler is active
cat /sys/block/sda/queue/scheduler

Kernel (/etc/sysctl.d/99-storage.conf):

# Maximize page cache use — don't swap until absolutely necessary
vm.swappiness = 1

# Allow more dirty pages in memory before flushing to disk
vm.dirty_ratio = 40
vm.dirty_background_ratio = 10
vm.dirty_expire_centisecs = 3000
vm.dirty_writeback_centisecs = 500

# Increase file descriptor and inode cache limits
fs.file-max = 4194304
fs.inotify.max_user_watches = 524288

# Increase read-ahead for large sequential I/O
# (adjust per workload — too high hurts random I/O)
# blockdev --setra 8192 /dev/sda   # set 4MB read-ahead

NFS-specific tuning:

# Increase NFS server threads (default 8 — try 32–64 for heavy load)
echo 32 > /proc/fs/nfsd/threads

# Optimize NFS client mount options
# Add to /etc/fstab:
# server:/export /mnt/nfs nfs rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2,_netdev 0 0

ulimits (/etc/security/limits.d/99-storage.conf):

*    soft nofile 262144
*    hard nofile 1048576

Profile 7 — Redis Cache / Message Broker

Kernel (/etc/sysctl.d/99-redis.conf):

# Redis requires vm.overcommit_memory=1 to avoid fork() failures during saves
vm.overcommit_memory = 1

# Disable swap — Redis in swap = terrible latency
vm.swappiness = 0

# High connection counts
net.core.somaxconn = 65535

Disable Transparent Huge Pages (causes Redis latency spikes):

echo never > /sys/kernel/mm/transparent_hugepage/enabled
echo never > /sys/kernel/mm/transparent_hugepage/defrag

# Persist via systemd or rc.local

Key redis.conf settings:

Check Redis health:

redis-cli info stats | grep -E "evicted|rejected|keyspace"
redis-cli info memory | grep -E "used_memory_human|maxmemory_human"
redis-cli --latency -h localhost -p 6379

Profiling Tools Reference

Use these to identify the bottleneck before tuning:

Quick flamegraph:

# Record 30 seconds of CPU stack traces
perf record -F 99 -a -g -- sleep 30
perf script | /path/to/FlameGraph/stackcollapse-perf.pl | \
  /path/to/FlameGraph/flamegraph.pl > flame.svg
# Open flame.svg in browser

Output Format

Write tuning files to ./performance/ in the current working directory:

performance/
  sysctl.conf         ← drop into /etc/sysctl.d/99-tuning.conf
  limits.conf         ← drop into /etc/security/limits.d/99-tuning.conf
  io-scheduler.sh     ← set I/O scheduler + persist via udev rule
  cpu-governor.sh     ← set CPU governor + systemd service
  apply-all.sh        ← apply everything at once

Then print ONLY:

✅ Performance tuning written to ./performance/

▶ Review before applying — understand each change:
  cat performance/sysctl.conf

▶ Apply all at once:
  chmod +x performance/apply-all.sh
  sudo ./performance/apply-all.sh

▶ Or apply individually:
  sudo cp performance/sysctl.conf /etc/sysctl.d/99-tuning.conf
  sudo sysctl -p /etc/sysctl.d/99-tuning.conf
  sudo cp performance/limits.conf /etc/security/limits.d/99-tuning.conf

▶ Measure after applying (compare to before):
  vmstat 1 10
  iostat -xz 1 5

💡 Always benchmark before and after — tuning without measurement is guessing.
💡 Next: /linux-monitoring-setup to track metrics continuously after tuning.