Codacy Analysis CLI

Codacy Analysis CLI

Glossary: See glossary.md for shared definitions of Codacy concepts (issues, findings, severity, coverage, tools, patterns, etc.).

The Codacy Analysis CLI (codacy-analysis) runs static analysis locally on a repository. It detects languages, selects tools, and reports issues — without pushing code to Codacy. This is a different tool from the Codacy Cloud CLI (codacy), which queries remote Codacy data.

Always use --output-format json for structured output in agentic workflows.

Setup

# Install
npm i -g @codacy/analysis-cli

# Verify
codacy-analysis --help

Authentication (optional)

Authentication is only required for init --remote (fetching config from a Codacy repository). Local analysis works without authentication.

# Option 1: Interactive login
codacy-analysis login

# Option 2: Token flag
codacy-analysis login --token <your-api-token>

# Option 3: Environment variable
export CODACY_API_TOKEN=<your-api-token>

# Obtain tokens: Codacy > My Account > Access Management
# Remove credentials
codacy-analysis logout

Shared session: The Analysis CLI and the Cloud CLI (codacy) share the same credentials at ~/.codacy/credentials. Logging in or out with either CLI applies to both — there is no need to authenticate separately.

Getting help

codacy-analysis --help
codacy-analysis <command> --help
# e.g. codacy-analysis analyze --help

Filesystem conventions

The CLI uses two managed locations:

The analyzed repository is never modified outside of .codacy/. The .codacy/.gitignore is auto-created to exclude generated/, logs, and other transient files.

Key files

• .codacy/codacy.config.json — Main configuration: tools, patterns, excludes, metadata. See references/config-format.md for the full schema
• .codacy/generated/<ToolId>/ — Materialized tool-specific configs (gitignored)
• ~/.codacy/credentials — Stored API token
• ~/.codacy/logs/ — Structured logs (JSON lines, rotated at 10 MB)

Provider values

Used with init --remote. See the Provider section in the glossary for the full table of CLI values (gh, gl, bb).

Analysis workflow

Analysis Progress:
- [ ] Step 1: Initialize configuration
- [ ] Step 2: Inspect tool availability (dry-run)
- [ ] Step 3: Install missing dependencies
- [ ] Step 4: Run analysis
- [ ] Step 5: Interpret results

Step 1: Initialize configuration

Choose the init mode based on the repository's situation:

Repository is in Codacy and you want its exact config:

# Requires authentication (login or CODACY_API_TOKEN)
codacy-analysis init --remote <provider> <org> <repo>
# e.g. codacy-analysis init --remote gh my-org my-repo

Repository is in Codacy but you just want sensible defaults:

# No token needed — uses the public Codacy API for default patterns
codacy-analysis init --default

Broad auto-tuned initialization (maximum pattern coverage):

# Initializes with all patterns matching the given severity/category filter
codacy-analysis init --auto "AllCritical,High,Warning,Minor,AllSecurity,ErrorProne,Performance,BestPractice,UnusedCode,Compatibility,Complexity,Comprehensibility,CodeStyle,Documentation"

The --auto flag selects patterns broadly based on a comma-separated filter of severities and categories. Use this when you want to start with maximum coverage and then trim noise using analysis data.

Repository is not in Codacy (local-only analysis):

# Detects languages and tools based on local files and config
codacy-analysis init

A specific directory (not the current one):

codacy-analysis init /path/to/repo

All modes create .codacy/codacy.config.json in the repo root (or the file passed to --config-file, see Working with alternative configuration files). If a .codacy.yaml (or .codacy.yml) exists, its exclude_paths are automatically merged into the config.

Updating an existing configuration

When the config was initialized with --remote and you want to re-sync with the remote Codacy configuration:

codacy-analysis update-config

This re-fetches the configuration from the same Codacy repository used during init.

Only use update-config with --remote configs. For configs initialized with --default or bare init, update-config re-runs the original init mode, which would overwrite any manual changes you've made to the config file.

Working with alternative configuration files

By default every command reads and writes .codacy/codacy.config.json. Pass --config-file <path> to init, analyze, and update-config to use a different file. This lets you keep several configurations side by side and test them in parallel without overwriting the main config:

# Create an alternative, broadly-tuned config in a separate file
codacy-analysis init --auto AllCritical,AllSecurity --config-file .codacy/auto-config.json

# Analyze using that config instead of the default
codacy-analysis analyze --config-file .codacy/auto-config.json --output-format json

# Regenerate it later using its original init mode (the mode is stored in the file)
codacy-analysis update-config --config-file .codacy/auto-config.json

--config-file is honored by init (where to create the config), analyze (which config to run with), and update-config (which config to regenerate). It defaults to .codacy/codacy.config.json everywhere.

Combining configuration files (config command)

The config command performs set operations on two config files, combining their tools and patterns. Use it to reconcile experimental configs with a baseline:

# Merge — union of tools/patterns from source into dest
codacy-analysis config --merge --source .codacy/extra.json

# Intersect — keep only tools/patterns present in BOTH files
codacy-analysis config --intersect --source a.json --dest b.json

# Diff — keep tools/patterns in dest that are NOT in source (dest − source)
codacy-analysis config --diff --source baseline.json --dest .codacy/codacy.config.json

• Exactly one of --merge, --intersect, --diff is required.
• --source <path> is read-only (default .codacy/codacy.config.json); --dest <path> is overwritten with the result (default .codacy/codacy.config.json).
• At least one of --source / --dest must be provided — they cannot both fall back to the same default file.

--dest is overwritten in place. Point it at a throwaway file (or back up the original first) if you need to preserve the destination config.

Discovering the repository stack

Use discover to auto-detect the repository's languages, frameworks, and libraries before initialization:

codacy-analysis discover --output-format json --output /tmp/codacy-discover.json

The output lists detected languages, frameworks, and the tools that apply. Use this to inform which tools and patterns to enable.

Listing supported tools

Use info to see which tools are available in the local Analysis CLI:

codacy-analysis info

This lists all tools the CLI can run locally. Compare against tools enabled in Codacy Cloud to identify cloud-only tools that the local CLI cannot run.

Step 2: Inspect tool availability (dry-run)

Before running analysis, check which tools are available and which are missing:

codacy-analysis analyze --inspect --output-format json

This produces a capability report without running any analysis. Parse the JSON output:

# See which tools are ready
codacy-analysis analyze --inspect --output-format json | jq '.capability.ready[] | {toolId, version, installation}'

# See which tools are missing and how to fix them
codacy-analysis analyze --inspect --output-format json | jq '.capability.unavailable[] | {toolId, reason, remediation}'

Important: --inspect and --install-dependencies are mutually exclusive. Use --inspect first to check readiness, then --install-dependencies to install and run in a single step.

Decision point:

• If all needed tools are in capability.ready → skip to Step 4
• If tools are in capability.unavailable → proceed to Step 3

Step 3: Install missing dependencies

Preferred: use --install-dependencies — installs tools into the .codacy/ / ~/.codacy/ scope without affecting the rest of the machine:

codacy-analysis analyze --install-dependencies --output-format json

This installs missing tools and then runs analysis in a single command. The installed binaries go to ~/.codacy/ (machine-scoped, reused across repositories).

Last resort: manual installation — if --install-dependencies fails for a specific tool, install it manually on the machine (e.g., brew install shellcheck, pip install ruff). See references/supported-tools.md for tool details.

Step 4: Run analysis

Always use --output-format json for agentic workflows.

Analyze the entire repository

codacy-analysis analyze --output-format json

Analyze specific files or paths

# Single file (positional argument)
codacy-analysis analyze ./src/main.py --output-format json

# Multiple files by path or glob (--files flag)
codacy-analysis analyze --files src/a.py src/b.py --output-format json

# Glob pattern (always quote to prevent shell expansion)
codacy-analysis analyze --files "src/**/*.ts" --output-format json

# Subdirectory
codacy-analysis analyze ./src/api/ --output-format json

Restrict to specific tools

Tool IDs are case-sensitive. See references/supported-tools.md for the full list.

# Single tool
codacy-analysis analyze --tool Ruff --output-format json

# Multiple tools
codacy-analysis analyze --tool Ruff --tool Bandit --output-format json

# Combine with file targeting
codacy-analysis analyze --tool ESLint9 --files "src/**/*.ts" --output-format json

Run with an alternative configuration file

By default analyze reads .codacy/codacy.config.json. Pass --config-file <path> to run with a different config — useful for comparing configurations side by side (see Working with alternative configuration files):

codacy-analysis analyze --config-file .codacy/auto-config.json --output-format json

Git-aware scoping

Analyze only the code that changed, instead of the full repository:

# Only files staged for commit
codacy-analysis analyze --staged --output-format json

# Changes relative to the current branch's merge base (uncommitted + committed)
codacy-analysis analyze --diff --output-format json

# Changes in a pull request (compares against the PR's target branch)
codacy-analysis analyze --pr --output-format json

These flags work with --tool, --files, and all other analyze options. When combined with --files, the intersection is used (files that match both the git scope and the file filter).

Performance tuning

# Run up to 4 tools in parallel
codacy-analysis analyze --parallel-tools 4 --output-format json

# Increase timeout for slow tools (default: 600000ms = 10 min)
codacy-analysis analyze --tool-timeout 600000 --output-format json

Strict mode

Fail immediately if any configured tool is unavailable (instead of skipping it):

codacy-analysis analyze --fail-if-missing --output-format json

Save output to file

codacy-analysis analyze --output-format json --output results.json

Debugging

# Verbose logging to stderr
codacy-analysis analyze --log-level debug --output-format json

# Disable log file writing (e.g., in CI)
codacy-analysis analyze --no-log --output-format json

Step 5: Interpret results

The JSON output contains the full AnalysisResult. See references/output-format.md for the complete schema.

Quick reference for parsing:

# Count issues by severity
codacy-analysis analyze --output-format json | jq '.issues | group_by(.severity) | map({severity: .[0].severity, count: length})'

# Get critical/high issues only
codacy-analysis analyze --output-format json | jq '[.issues[] | select(.severity == "Error" or .severity == "High")]'

# Issues grouped by file
codacy-analysis analyze --output-format json | jq '.issues | group_by(.filePath) | map({file: .[0].filePath, count: length})'

# Check for tool errors
codacy-analysis analyze --output-format json | jq '.errors'

# Per-tool summary
codacy-analysis analyze --output-format json | jq '.toolResults | map({toolId, status, issueCount, durationMs})'

Exit codes:

• 0 — Success, no issues found
• 1 — Issues found
• 2 — Execution error (tool crash, missing dependency, etc.)

Common workflows

Quick scan of a repository not in Codacy

codacy-analysis init
codacy-analysis analyze --install-dependencies --output-format json

Scan only changed files (e.g., before a commit)

# Staged files only (pre-commit check)
codacy-analysis analyze --staged --output-format json

# All changes on the current branch
codacy-analysis analyze --diff --output-format json

# Changes in a pull request
codacy-analysis analyze --pr --output-format json

Reproduce Codacy remote analysis locally

codacy-analysis login --token <token>
codacy-analysis init --remote gh my-org my-repo
codacy-analysis analyze --install-dependencies --output-format json

Check a single file for issues

codacy-analysis analyze ./src/main.py --output-format json

Re-scan after configuration changes

codacy-analysis update-config
codacy-analysis analyze --output-format json

Test two configurations side by side

# Baseline config (default location) plus an experimental, broader config
codacy-analysis init
codacy-analysis init --auto AllCritical,AllSecurity --config-file .codacy/experimental.json

# Run each independently and compare the results
codacy-analysis analyze --output-format json --output baseline-results.json
codacy-analysis analyze --config-file .codacy/experimental.json --output-format json --output experimental-results.json

# Promote the extra tools/patterns from the experiment into the baseline
codacy-analysis config --merge --source .codacy/experimental.json --dest .codacy/codacy.config.json

Run only security-focused tools

codacy-analysis analyze --tool Bandit --tool Brakeman --tool Trivy --tool Semgrep --tool Checkov --output-format json

Analyze a Ruby project

codacy-analysis analyze --tool RuboCop --tool Reek --tool Brakeman --output-format json

Troubleshooting

Reading logs

Logs are written to ~/.codacy/logs/ in JSON lines format:

# View latest log
cat ~/.codacy/logs/*.log | jq .

# Filter for errors
cat ~/.codacy/logs/*.log | jq 'select(.level == "error")'

Use --log-level debug for the most verbose output when troubleshooting tool issues.