Lisa Setup Github

Setup GitHub: $ARGUMENTS

Make GitHub Issues a tracker, a PRD source, or both for this project. After this skill, .lisa.config.json contains github.org + github.repo, the configured repo carries the lifecycle label namespaces lisa needs, and (optionally) tracker / source point at GitHub.

Unlike setup-jira / setup-confluence, this skill has no setup-atlassian dependency — GitHub auth runs through the gh CLI directly.

Workflow

Step 0 — Decide what GitHub is for

Ask via AskUserQuestion (multiSelect):

What should lisa use this GitHub repo for?

1. Destination tracker — lisa writes Epics / Stories / Sub-tasks here as Issues, and the build queue (/lisa:intake, /lisa:implement) runs off the status:* label namespace. Sets tracker: "github".
2. PRD source — humans drop PRDs here as Issues labeled prd-ready; /lisa:intake scans and ticketes them off the prd-* label namespace. Sets source: "github".

The answer drives which label namespaces get scaffolded in Step 3: tracker → status:*, source → prd-* + sentinel. Self-host (both) is supported — the two namespaces never overlap (see the config-resolution rule's "Self-host edge case").

If the user selects neither, stop — there's nothing to configure.

Step 1 — Ensure the gh CLI is installed and authenticated

if ! command -v gh >/dev/null 2>&1; then
  if command -v brew >/dev/null 2>&1; then
    brew install gh
  else
    cat >&2 <<'EOF'
Error: gh (GitHub CLI) not found and Homebrew unavailable. Install it:
  https://github.com/cli/cli#installation
Then re-run /lisa:setup:github.
EOF
    exit 1
  fi
fi

# Auth: prefer an interactive login; CI/headless uses GH_TOKEN.
if ! gh auth status >/dev/null 2>&1; then
  if [ -n "$GH_TOKEN" ] || [ -n "$GITHUB_TOKEN" ]; then
    echo "gh not logged in interactively, but GH_TOKEN/GITHUB_TOKEN is set — gh will use it."
  else
    cat >&2 <<'EOF'
Error: gh is not authenticated. Run:
  gh auth login           # interactive (developer machines)
or set GH_TOKEN as a secret (CI / headless), then re-run /lisa:setup:github.
EOF
    exit 1
  fi
fi

Confirm the authenticated identity can write Issues and labels — gh auth status shows the token scopes; repo scope (or fine-grained Issues: read-write + metadata: read) is required to create labels and issues. If the scopes look read-only, surface it and instruct gh auth refresh -s repo.

Step 2 — Resolve org/repo

Honor any --repo=org/repo argument. Otherwise default-detect from the current repo's origin remote, then confirm — the tracker/PRD repo is frequently a different repo than the code repo (e.g. a dedicated product-prds repo):

DEFAULT_REPO=$(gh repo view --json nameWithOwner -q .nameWithOwner 2>/dev/null)

Present the detected value via AskUserQuestion:

Use <DEFAULT_REPO> as the GitHub repo for lisa's issues/PRDs, or specify a different org/repo?

Once resolved, split into ORG and REPO and confirm reachability + write access:

gh repo view "$ORG/$REPO" --json name,viewerPermission \
  --jq 'if (.viewerPermission | IN("ADMIN","MAINTAIN","WRITE")) then "ok" else error("insufficient permission: \(.viewerPermission)") end'

If permission is READ / TRIAGE, stop — lisa cannot create labels or issues. Surface and exit.

Step 2b — Choose the queue repository

When GitHub is selected as the destination tracker, initialize the choice from an existing github.queueRepo, or $ORG/$REPO when absent, then ask whether the build backlog lives there, in the identity repo, or in another umbrella/planning repo. If the user gives an umbrella repo, accept a short name by normalizing it to $ORG/<name> or accept a full owner/repo, then verify it is reachable and the authenticated identity can manage the lifecycle labels Lisa needs:

gh repo view "$QUEUE_ORG/$QUEUE_REPO" --json name,viewerPermission \
  --jq 'if (.viewerPermission | IN("ADMIN","MAINTAIN","WRITE")) then "ok" else error("insufficient permission: \(.viewerPermission)") end'

Store github.queueRepo only when the canonical queue owner/repo differs from $ORG/$REPO. This choice changes queue scans, not repository identity: github.repo, repo:<current> claim scoping, issue destinations, and automation naming remain tied to the identity/tracker repo.

Step 3 — Scaffold the lifecycle label namespaces

Read role → label mappings with the same default-fallback ladder the intake skills use, so the labels created here exactly match what they look for. Only the namespaces selected in Step 0 are scaffolded.

read_role() {  # $1=namespace (build|prd) $2=role $3=default
  local ns="$1" role="$2" default="$3" local_v global_v
  local_v=$(jq -r ".github.labels.${ns}.${role} // empty" .lisa.config.local.json 2>/dev/null)
  global_v=$(jq -r ".github.labels.${ns}.${role} // empty" .lisa.config.json 2>/dev/null)
  echo "${local_v:-${global_v:-$default}}"
}

# Idempotent label creator: create if missing, leave untouched if present.
# LABEL_ORG/LABEL_REPO select the repo for the namespace being scaffolded.
ensure_label() {  # $1=name $2=hex-color $3=description
  local name="$1" color="$2" desc="$3"
  if gh label list --repo "$LABEL_ORG/$LABEL_REPO" --limit 200 --json name --jq '.[].name' | grep -qxF "$name"; then
    echo "  = $name (exists)"
  else
    gh label create "$name" --repo "$LABEL_ORG/$LABEL_REPO" --color "$color" --description "$desc" \
      && echo "  + $name (created)"
  fi
}

3a. Build-queue labels (only if GitHub is the tracker)

Defaults from config-resolution. The done role is env-keyed — create all three by default; a project whose terminal state is env-independent can later collapse github.labels.build.done to a single string.

LABEL_ORG="$QUEUE_ORG"
LABEL_REPO="$QUEUE_REPO"
ensure_label "$(read_role build ready    status:ready)"        FBCA04 "Ready for build (human signal)"
ensure_label "$(read_role build claimed  status:in-progress)"  0E8A16 "Build in progress (agent owns)"
ensure_label "$(read_role build blocked  status:blocked)"      D93F0B "Blocked — human attention required"
ensure_label "$(read_role build done.dev        status:on-dev)" 1D76DB "Deployed to dev"
ensure_label "$(read_role build done.staging    status:on-stg)" 1D76DB "Deployed to staging"
ensure_label "$(read_role build done.production status:done)"   0E8A16 "Shipped to production"

3b. PRD-lifecycle labels (only if GitHub is the PRD source)

LABEL_ORG="$ORG"
LABEL_REPO="$REPO"
ensure_label "$(read_role prd draft     prd-draft)"            C5DEF5 "PRD in progress (product owns)"
ensure_label "$(read_role prd ready     prd-ready)"            FBCA04 "PRD ready for ticketing"
ensure_label "$(read_role prd in_review prd-in-review)"        5319E7 "Claude is reviewing this PRD"
ensure_label "$(read_role prd blocked   prd-blocked)"          D93F0B "PRD blocked — see comments"
ensure_label "$(read_role prd ticketed  prd-ticketed)"         0E8A16 "Tickets created — see comments"
ensure_label "$(read_role prd shipped   prd-shipped)"          1D76DB "Work delivered (product owns)"
ensure_label "$(read_role prd verified  prd-verified)"         0E8A16 "Shipped product empirically verified against the PRD (product owns)"
ensure_label "$(read_role prd sentinel  prd-intake-feedback)"  EDEDED "Marker for PRD-intake feedback issues"

3c. Handle name collisions / renames

If a project already uses a differently-named label for a role (e.g. ready-for-dev instead of status:ready), do NOT create a duplicate. Present the repo's existing labels via AskUserQuestion and let the user map the role to the existing label — that mapping becomes an override written in Step 4. Renaming-in-place (keeping lisa's defaults) is also fine if the user prefers; just surface the choice.

Step 4 — Write .lisa.config.json

github.org / github.repo are project-wide → committed. Write only label keys that differ from the documented defaults — never echo the full default map into config (keeps it lean; missing keys inherit defaults at runtime).

touch .lisa.config.json
[ -s .lisa.config.json ] || echo '{}' > .lisa.config.json

jq --arg org "$ORG" --arg repo "$REPO" \
   '.github = ((.github // {}) | .org = $org | .repo = $repo)' \
   .lisa.config.json > .lisa.config.json.tmp && mv .lisa.config.json.tmp .lisa.config.json

# Queue repo is canonical owner/repo and omitted for the identity/default case.
# A source-only setup rerun preserves any existing build-queue choice.
if [ "$GITHUB_TRACKER_SELECTED" = "true" ]; then
  if [ "$QUEUE_ORG/$QUEUE_REPO" = "$ORG/$REPO" ]; then
    jq 'del(.github.queueRepo)' .lisa.config.json > .lisa.config.json.tmp \
      && mv .lisa.config.json.tmp .lisa.config.json
  else
    jq --arg queue "$QUEUE_ORG/$QUEUE_REPO" '.github.queueRepo = $queue' \
      .lisa.config.json > .lisa.config.json.tmp \
      && mv .lisa.config.json.tmp .lisa.config.json
  fi
fi

# Conditionally write label overrides (only roles the user mapped to non-default names).
# $LABEL_OVERRIDES_JSON is e.g. {"build":{"ready":"ready-for-dev"}} — {} if all defaults.
if [ -n "$LABEL_OVERRIDES_JSON" ] && [ "$LABEL_OVERRIDES_JSON" != "{}" ]; then
  jq --argjson o "$LABEL_OVERRIDES_JSON" \
     '.github.labels = ((.github.labels // {}) * $o)' \
     .lisa.config.json > .lisa.config.json.tmp && mv .lisa.config.json.tmp .lisa.config.json
fi

If this project later enables shared GitHub Project coordination, store it under the same github block as:

"github": {
  "org": "<tracked-repo-owner>",
  "repo": "<tracked-repo>",
  "projects": {
    "v2": {
      "owner": { "kind": "organization", "slug": "<tracked-repo-owner>" },
      "number": 7,
      "required": false
    }
  }
}

That block is optional and coordination-only: real issues and pull requests stay the durable source of truth. In v1, github.projects.v2.owner.slug MUST match the tracked repository namespace (github.org) — user-owned repos use a user-owned Project, org-owned repos use an org-owned Project, and cross-namespace Project ownership is rejected. required defaults to false, meaning Project membership is best-effort unless a later setup/doctor flow explicitly opts into strict mode.

When that block is present, later setup/doctor and runtime validation must read the shared Project's owner + access before membership writes depend on it. Best-effort mode (required: false) reports warning-level validation failures and continues repository-local writes without Project membership; strict mode (required: true) reports the same failures as blocking errors and stops the write.

No secrets go in config — the GitHub token lives in gh's own store (~/.config/gh/) or the GH_TOKEN env var, never in .lisa.config.json.

Step 5 — Offer to set top-level tracker / source

For each role selected in Step 0, offer the matching top-level flag (skip if already set to GitHub).

If tracker was selected and .tracker is unset or not "github", ask via AskUserQuestion:

Repo <org>/<repo> configured. Set top-level tracker: "github" so all vendor-neutral skills write Issues here?

If yes: jq '.tracker = "github"' ...

If source was selected and .source is unset or not "github", ask:

Set top-level source: "github" so /lisa:intake (with no args) scans this repo for prd-ready PRDs?

If yes: jq '.source = "github"' ...

Both are project-wide switches that change every downstream skill's default — never set either without explicit confirmation.

Step 6 — Verify

jq -e '.github.org and .github.repo' .lisa.config.json >/dev/null
EFFECTIVE_ORG=$(jq -r '.github.org // empty' .lisa.config.local.json 2>/dev/null)
EFFECTIVE_ORG=${EFFECTIVE_ORG:-$(jq -r '.github.org' .lisa.config.json)}
EFFECTIVE_REPO=$(jq -r '.github.repo // empty' .lisa.config.local.json 2>/dev/null)
EFFECTIVE_REPO=${EFFECTIVE_REPO:-$(jq -r '.github.repo' .lisa.config.json)}
QUEUE_VALUE=$(jq -r '.github.queueRepo // empty' .lisa.config.local.json 2>/dev/null)
QUEUE_VALUE=${QUEUE_VALUE:-$(jq -r '.github.queueRepo // empty' .lisa.config.json)}
if [ -z "$QUEUE_VALUE" ]; then
  QUEUE_REF="$EFFECTIVE_ORG/$EFFECTIVE_REPO"
elif [[ "$QUEUE_VALUE" == */* ]]; then
  QUEUE_REF="$QUEUE_VALUE"
else
  QUEUE_REF="$EFFECTIVE_ORG/$QUEUE_VALUE"
fi
gh repo view "$QUEUE_REF" --json nameWithOwner --jq .nameWithOwner
gh label list --repo "$ORG/$REPO" --limit 200 --json name --jq '.[].name' \
  | grep -E 'prd-' || true
gh label list --repo "$QUEUE_REF" --limit 200 --json name --jq '.[].name' \
  | grep -E 'status:' || true

If github.projects.v2 is configured, setup verification MUST also run the shared Project utility in read-only resolution mode before declaring success:

operation: resolve-project

This is the setup/doctor chokepoint for GitHub Project coordination. Do not inline ad-hoc GraphQL here; delegate to lisa-github-project-v2 so setup, doctor, writers, and linked-PR flows all read the same owner/access contract and surface the same exact failure text.

Verification contract when github.projects.v2 is present:

• First enforce the v1 namespace rule locally: github.projects.v2.owner.slug MUST equal github.org. If not, report the exact configuration failure and remediation:

  code: project_namespace_mismatch
  message: "github.projects.v2.owner.slug must match github.org in v1"
  remediation: "Use a Project owned by <github.org> or remove github.projects.v2."
  

• Then resolve the configured Project owner + number through lisa-github-project-v2.

• Preserve the exact GitHub / GraphQL failure text for inaccessible or unsupported Project configurations. Examples: missing Project, Resource not accessible by integration, unsupported owner kind, or any other Project read failure.

• Report the exact remediation path. At minimum, say whether the operator must:

  1. choose a Project owned by the tracked repo namespace,
  2. grant the token Project read/write access,
  3. correct the configured Project number/owner, or
  4. remove github.projects.v2 if coordination is not required.

• Branch severity on required exactly the same way the shared utility does: required: false => warning-level validation failure, continue repository-local setup success; required: true => blocking verification failure, stop setup/doctor before claiming coordination is usable.

The verify output should make the operator's next step obvious. Good examples:

WARNING github.projects.v2: Resource not accessible by integration
Remediation: grant the token Project read/write access or remove github.projects.v2.required.
Repository-local GitHub issue/PR flows remain usable; Project coordination is disabled.

ERROR github.projects.v2: github.projects.v2.owner.slug must match github.org in v1
Remediation: use a Project owned by CodySwannGT or remove github.projects.v2.

Report success with the resolved org/repo, which label namespaces were scaffolded (and which labels already existed vs. were created), any non-default label overrides written, and whether tracker / source were set. Direct the user to /lisa:intake to test.

Idempotency

• Re-running merges the github section's fields rather than appending — jq merge semantics throughout.
• ensure_label is find-or-create: existing labels are left exactly as they are (color/description not overwritten), so a re-run never churns labels a human customized.
• Re-running does not re-prompt for tracker / source if they already point at GitHub.

Rules

• Never write the GitHub token to .lisa.config.json. It stays in gh's store or GH_TOKEN.
• Never create a duplicate label for a role that already has a (differently-named) label — map the role to the existing label and record it as a config override instead.
• Never overload one label across both the PRD and build namespaces — a single issue is either a PRD or a build ticket, never both (see config-resolution).
• Never set tracker / source without explicit user confirmation — they're project-wide and switch every downstream skill's behavior.
• Never invent an org/repo. Default-detect from the remote and confirm; if detection fails, ask the user to supply it.