Inertia Rails Ssr

Inertia Rails Server-Side Rendering (SSR)

Server-Side Rendering pre-renders JavaScript pages on the server, delivering fully rendered HTML to visitors. This improves SEO, enables faster initial page loads, and allows basic navigation even with JavaScript disabled.

When to Use SSR

• SEO-critical pages - Landing pages, blog posts, product pages
• Social sharing - Pages that need proper Open Graph meta tags
• Slow connections - Users see content before JavaScript loads
• Accessibility - Basic functionality without JavaScript

Requirements

• Node.js must be available on your server
• Vite Ruby for build configuration
• @inertiajs/vite plugin (recommended for v3)

Recommended: Vite Plugin Setup (v3)

The @inertiajs/vite plugin simplifies SSR dramatically. In development, SSR runs through the Vite dev server automatically — no separate Node.js process needed.

1. Install the Vite Plugin

npm install @inertiajs/vite

2. Configure Vite

Update your vite.config.js:

React:

import { defineConfig } from 'vite'
import react from '@vitejs/plugin-react'
import inertia from '@inertiajs/vite'

export default defineConfig({
  plugins: [
    inertia(),
    react(),
  ],
})

Vue 3:

import { defineConfig } from 'vite'
import vue from '@vitejs/plugin-vue'
import inertia from '@inertiajs/vite'

export default defineConfig({
  plugins: [
    inertia(),
    vue(),
  ],
})

Svelte:

import { defineConfig } from 'vite'
import { svelte } from '@sveltejs/vite-plugin-svelte'
import inertia from '@inertiajs/vite'

export default defineConfig({
  plugins: [
    inertia(),
    svelte(),
  ],
})

3. Update Entry Point for Hydration

The client entry point should use hydration instead of full rendering when SSR is enabled.

React:

import { createInertiaApp } from '@inertiajs/react'
import { hydrateRoot } from 'react-dom/client'

createInertiaApp({
  resolve: (name) => {
    const pages = import.meta.glob('../pages/**/*.tsx', { eager: true })
    return pages[`../pages/${name}.tsx`]
  },
  setup({ el, App, props }) {
    hydrateRoot(el, <App {...props} />)
  },
})

Vue 3:

import { createInertiaApp } from '@inertiajs/vue3'
import { createSSRApp, h } from 'vue'

createInertiaApp({
  resolve: (name) => {
    const pages = import.meta.glob('../pages/**/*.vue', { eager: true })
    return pages[`../pages/${name}.vue`]
  },
  setup({ el, App, props, plugin }) {
    createSSRApp({
      render: () => h(App, props),
    })
      .use(plugin)
      .mount(el)
  },
})

4. Enable SSR in Rails

# config/initializers/inertia_rails.rb
InertiaRails.configure do |config|
  config.ssr_enabled = true

  # In development, SSR is handled by the Vite dev server automatically.
  # Set ssr_url to nil to auto-detect from Vite.
  config.ssr_url = nil

  # Optional: only enable SSR when the bundle exists (production)
  # config.ssr_bundle = Rails.root.join('public/vite-ssr/ssr.js')

  # Optional: cache SSR responses
  # config.ssr_cache = true
  # config.ssr_cache = { expires_in: 1.hour }

  # Optional: handle SSR errors gracefully
  config.ssr_raise_on_error = !Rails.env.production?
  config.on_ssr_error = ->(error, page) {
    Rails.logger.error "SSR error for #{page[:component]}: #{error.message}"
  }
end

5. Start Development

# Terminal 1: Rails server
bin/rails server

# Terminal 2: Vite dev server (handles SSR automatically)
bin/vite dev

That's it! No separate SSR server process needed in development.

Manual SSR Setup (Without Vite Plugin)

If you can't use the Vite plugin, you can set up SSR manually with a separate entry point.

1. Create SSR Entry Point

Create app/frontend/ssr/ssr.js:

Vue 3:

import { createInertiaApp } from '@inertiajs/vue3'
import createServer from '@inertiajs/vue3/server'
import { renderToString } from '@vue/server-renderer'
import { createSSRApp, h } from 'vue'

const pages = import.meta.glob('../pages/**/*.vue', { eager: true })

createServer((page) =>
  createInertiaApp({
    page,
    render: renderToString,
    resolve: (name) => {
      const page = pages[`../pages/${name}.vue`]
      if (!page) throw new Error(`Page not found: ${name}`)
      return page
    },
    setup({ App, props, plugin }) {
      return createSSRApp({
        render: () => h(App, props),
      }).use(plugin)
    },
  })
)

React:

import { createInertiaApp } from '@inertiajs/react'
import createServer from '@inertiajs/react/server'
import ReactDOMServer from 'react-dom/server'

const pages = import.meta.glob('../pages/**/*.jsx', { eager: true })

createServer((page) =>
  createInertiaApp({
    page,
    render: ReactDOMServer.renderToString,
    resolve: (name) => {
      const page = pages[`../pages/${name}.jsx`]
      if (!page) throw new Error(`Page not found: ${name}`)
      return page
    },
    setup: ({ App, props }) => <App {...props} />,
  })
)

2. Configure Vite Ruby

Update config/vite.json:

{
  "all": {
    "sourceCodeDir": "app/frontend",
    "entrypointsDir": "entrypoints"
  },
  "development": {
    "autoBuild": true
  },
  "production": {
    "ssrBuildEnabled": true
  }
}

3. Enable SSR in Rails

InertiaRails.configure do |config|
  config.ssr_enabled = ViteRuby.config.ssr_build_enabled
  config.ssr_url = 'http://localhost:13714'
end

4. Build and Run

bin/vite build
bin/vite build --ssr
bin/vite ssr

Production Deployment

In production, you still need to build the SSR bundle and run a Node.js server (even with the Vite plugin).

Build for Production

bin/vite build
bin/vite build --ssr

Process Manager (systemd)

Create /etc/systemd/system/inertia-ssr.service:

[Unit]
Description=Inertia SSR Server
After=network.target

[Service]
Type=simple
User=deploy
WorkingDirectory=/var/www/myapp/current
ExecStart=/usr/bin/node public/vite-ssr/ssr.js
Restart=on-failure
Environment=NODE_ENV=production

[Install]
WantedBy=multi-user.target

sudo systemctl enable inertia-ssr
sudo systemctl start inertia-ssr

Process Manager (PM2)

pm2 start public/vite-ssr/ssr.js --name inertia-ssr
pm2 save

Docker

CMD ["sh", "-c", "node public/vite-ssr/ssr.js & bundle exec puma"]

Advanced Configuration

SSR Response Caching

Cache SSR responses to reduce Node.js load:

InertiaRails.configure do |config|
  # Simple boolean — uses default Rails cache store
  config.ssr_cache = true

  # Or with options
  config.ssr_cache = { expires_in: 1.hour }
end

SSR Bundle Detection

Only attempt SSR when the bundle exists:

InertiaRails.configure do |config|
  config.ssr_bundle = Rails.root.join('public/vite-ssr/ssr.js')
  # Can also be an array of paths to check
  # config.ssr_bundle = [
  #   Rails.root.join('public/vite-ssr/ssr.js'),
  #   Rails.root.join('public/vite-ssr/ssr.mjs'),
  # ]
end

Clustering

For better performance on multi-core systems:

// ssr/ssr.js
createServer(
  (page) => createInertiaApp({ /* ... */ }),
  { cluster: true }
)

Custom Port

createServer(
  (page) => createInertiaApp({ /* ... */ }),
  { port: 13715 }
)

Conditional SSR

Enable SSR only for specific routes:

class ApplicationController < ActionController::Base
  # Disable SSR for admin pages
  inertia_config(ssr_enabled: false)
end

class PagesController < ApplicationController
  # Enable SSR for public pages
  inertia_config(ssr_enabled: Rails.env.production?)
end

# Per-action with a lambda
class PostsController < ApplicationController
  inertia_config(ssr_enabled: ->(request) {
    request.path.start_with?('/blog')
  })
end

Title and Meta Tags

Server-Managed Meta Tags (v3)

Set meta tags from your controller using the inertia_meta helper or the meta: render option:

class PostsController < ApplicationController
  def show
    post = Post.find(params[:id])

    render inertia: {
      post: post.as_json(only: [:id, :title, :content])
    }, meta: {
      title: post.title,
      description: post.excerpt,
      og_image: post.cover_image_url
    }
  end
end

Using Head Component

Vue 3:

<script setup>
import { Head } from '@inertiajs/vue3'

defineProps(['post'])
</script>

<template>
  <Head>
    <title>{{ post.title }}</title>
    <meta name="description" :content="post.excerpt" />
    <meta property="og:title" :content="post.title" />
    <meta property="og:image" :content="post.coverImageUrl" />
  </Head>

  <article>
    <h1>{{ post.title }}</h1>
  </article>
</template>

React:

import { Head } from '@inertiajs/react'

export default function Show({ post }) {
  return (
    <>
      <Head>
        <title>{post.title}</title>
        <meta name="description" content={post.excerpt} />
        <meta property="og:title" content={post.title} />
      </Head>

      <article>
        <h1>{post.title}</h1>
      </article>
    </>
  )
}

Default Title Template

createInertiaApp({
  title: (title) => title ? `${title} - My App` : 'My App',
  // ...
})

Troubleshooting

SSR Server Not Responding

1. Check if the SSR server is running: curl http://localhost:13714
2. Check logs: journalctl -u inertia-ssr -f
3. Verify the port matches your Rails config
4. If using the Vite plugin in dev, ensure the Vite dev server is running

Hydration Mismatch Errors

1. Ensure client and server render the same content
2. Avoid browser-only APIs in initial render (use onMounted/useEffect)
3. Check for date/time formatting differences

// Bad - different on server vs client
const time = new Date().toLocaleTimeString()

// Good - render after mount
const time = ref(null)
onMounted(() => {
  time.value = new Date().toLocaleTimeString()
})

Memory Leaks

1. Avoid global state mutations in SSR
2. Use request-scoped state only
3. Monitor Node.js memory usage

SSR Fails Silently

Configure error handling to catch and log SSR failures:

InertiaRails.configure do |config|
  config.ssr_raise_on_error = !Rails.env.production?
  config.on_ssr_error = ->(error, page) {
    Rails.logger.error "SSR error: #{error.message}"
    Sentry.capture_exception(error) if defined?(Sentry)
  }
end

Performance Tips

1. Keep SSR lightweight - Defer heavy computations to client
2. Use caching - Enable ssr_cache for static/semi-static pages
3. Use clustering - Enable multi-worker mode for production
4. Monitor latency - Track SSR render times
5. Bundle detection - Use ssr_bundle to gracefully fall back to CSR

# Log slow SSR renders
around_action :track_ssr_time, if: -> { request.inertia? }

def track_ssr_time
  start = Time.current
  yield
  duration = Time.current - start
  Rails.logger.info "SSR render: #{duration.round(3)}s" if duration > 0.1
end