Unifi Network Manager

UniFi Network Manager (CLI)

Overview

unifi is a CLI wrapping the UniFi Network Integration API (https://{host}/proxy/network/integration/v1, X-API-KEY auth). Use it to inspect and manage a local UniFi console. JSON is the default output — parse it to answer.

Safety (read first)

• READ before WRITE — inspect with list/get/stats before any mutation.
• Every mutation requires --yes. First state exactly what will happen and get the user's explicit confirmation in conversation (e.g. "This reboots AP (id ...) — proceed?"), THEN run the command with --yes.
• You operate the user's real network. Never run a mutation the user did not approve, and keep actions scoped to the network they asked about. If a request is ambiguous or risky, stop and ask.

Setup Check

1. Verify the tool: command -v unifi. If missing, tell the user to install it (repo has make install). Do NOT install it yourself without asking.
2. Test connectivity: unifi info.

If you see host is required or auth errors, config is missing. Precedence: flags > env (UNIFI_HOST, UNIFI_API_KEY, UNIFI_SITE, UNIFI_INSECURE) > file (~/.config/unifi/config.json). Have the user configure it themselves — never ask for the API key in chat:

unifi configure --host <ip> --insecure   # set UNIFI_API_KEY in their env

Local consoles use self-signed certs, so --insecure is normally required.

Workflow

• Discover the site first if unknown: unifi sites list → use the site id as --site. One site → use it (often named "default").
• Use --all for the complete list (handles pagination); else --limit N.

Read commands

unifi info                                  # connectivity check
unifi sites list                            # get site id
unifi devices list --site <id>              # APs/switches/gateways
unifi devices get <deviceId> --site <id>
unifi devices stats <deviceId> --site <id>  # health telemetry
unifi clients list --site <id> --all        # connected devices
unifi clients get <clientId> --site <id>
unifi vouchers list --site <id>             # guest WiFi vouchers

devices stats is the only telemetry endpoint in the integration API.

Mutations (confirm in conversation, THEN add --yes)

unifi devices restart <deviceId> --site <id> --yes          # reboots device
unifi devices port-cycle <deviceId> --port <N> --site <id> --yes  # power-cycles PoE port
unifi clients authorize <clientId> --site <id> --yes        # authorize a guest
unifi vouchers create --site <id> --count 5 --minutes 1440 --yes
unifi vouchers delete <voucherId> --site <id> --yes

Warn the user: device restart briefly drops all clients on that device; PoE port-cycle reboots whatever device is powered on that port.

Beyond the curated commands

For firewall, DNS, networks/VLANs, WLANs, ACLs, port forwarding, traffic routes, RADIUS, WANs, VPN servers, or any other endpoint, the CLI reaches EVERY endpoint via typed resource commands or the api passthrough. See resources.md in this skill directory for the full path table and api usage.

Site Manager (cloud) commands

Besides the local console API above, the CLI also wraps the UniFi Site Manager API — Ubiquiti's account-wide cloud API at https://api.ui.com. Use it to see all consoles ("hosts") on an account, devices across sites, ISP performance metrics, and SD-WAN configs — handy when a console is behind CGNAT or you manage many sites.

Key differences from the local commands:

• Account-wide, not per-console. No console URL (--host) or --site needed.
• Read-only today (write scope is rolling out through 2026) — no --yes.
• Separate API key. The cloud key is created at unifi.ui.com → Settings → API Keys, and is generally different from the local console key. The CLI reuses UNIFI_API_KEY for it; if cloud calls return 401/403 while local calls work, the user likely needs to set their cloud key.

unifi site-manager hosts list                 # all consoles on the account
unifi site-manager hosts get <hostId>
unifi site-manager sites list
unifi site-manager devices list --host-id <id> # filter to a console
unifi site-manager isp-metrics get 1h --duration 7d
unifi site-manager isp-metrics query 1h --data '{"sites":["<id>"]}'
unifi site-manager sdwan list
unifi site-manager sdwan get <configId>
unifi site-manager sdwan status <configId>
unifi sm hosts list                            # `sm` is a shorthand

Anything not yet typed is reachable via unifi site-manager api GET <path> (e.g. unifi site-manager api GET /v1/hosts). The typed commands above are all read-only and need no --yes. The api passthrough mirrors the local api command: a non-GET method (for when cloud write scope ships) requires --yes.

Troubleshooting