Cis AWS Compute 5.5

5.5 Ensure RDP is restricted to only IP address that should have this access (Manual)

Description

Any ports enable within Lightsail by default are open and exposed to the world. For SSH and RDP access you should identify which IP address need access.

Rationale

Any ports enable within Lightsail by default are open and exposed to the world. This can result in outside traffic trying to access or even deny access to the Lightsail instances. Removing and adding approved IP address required for access.

Impact

N/A

Audit Procedure

Using AWS Console

1. Login to AWS Console using https://console.aws.amazon.com
2. Click All services, click Lightsail under Compute.
3. This will open up the Lightsail console.
4. Select the Windows Instance you want to review.
5. Go to the Networking section.
6. Confirm that the RDP Port is restricted to an IP address

7. If RDP is needed and it is open to Any IPv4 address refer to the remediation below.

Using AWS CLI

1. Run aws lightsail get-instances

aws lightsail get-instances --query "instances[*].name"

This command will provide a list of Instance names.

2. Run aws lightsail get-instance-port-states for any Windows instances listed

aws lightsail get-instance-port-states --instance-name <instance_name>

This command will provide a list of available Ports for the Instance name.

{
    "fromPort": 3389,
    "toPort": 3389,
    "protocol": "tcp",
    "state": "open",
    "cidrs": [
        "0.0.0.0/0"
    ],
    "cidrListAliases": []
},

3. Review the Port 22 settings and confirm that the only IP Addresses that should have access to the instance are listed in the cidrs as shown above.
4. If it is open to all ports (0.0.0.0/0) of there is an IP address listed that shouldn't have access refer to the remediation below.

Expected Result

RDP (Port 3389) should be restricted to specific IP addresses that require access. The CIDR should not contain 0.0.0.0/0 (open to all).

Remediation

Using AWS Console

1. Login to AWS Console using https://console.aws.amazon.com
2. Click All services, click Lightsail under Compute.
3. This will open up the Lightsail console.
4. Select the Windows Instance you want to review.
5. Go to the Networking section.
6. Under IPv4 networking find the SSH rule as shown below.

7. Click on the edit icon
8. Click on the check box next to Restrict to IP address
9. Under Source IP address (192.0.2.0) or range (192.0.2.0-192.0.2.255 or 192.0.2.0/24) type the IP address' you want.

Using AWS CLI

1. Run aws lightsail put-instance-public-ports

aws lightsail put-instance-public-ports --instance-name <instance_name> --port-info fromPort=3389,protocol=TCP,toPort=3389,cidrs=110.111.221.100/32,110.111.221.202/32

This command will enter the IP addresses that should have access to the instances identified above in the Audit.

2. Run aws lightsail get-instance-port-states for the Windows instance to confirm the new setting.

aws lightsail get-instance-port-states --instance-name <instance_name>

This command will provide a list of available Ports and show how the cidr value for Port 3389 is now set.

"portStates": [
    {
        "fromPort": 3389,
        "toPort": 3389,
        "protocol": "tcp",
        "state": "open",
        "cidrs": [
            "110.111.221.100/32",
            "110.111.221.202/32"
        ],
        "cidrListAliases": []
    }
]

3. Repeat the remediation below for all other Windows instances identified in the Audit.

Default Value

RDP (Port 3389) is open to all IPv4 addresses (0.0.0.0/0) by default on Windows Lightsail instances.

References

1. https://awscli.amazonaws.com/v2/documentation/api/latest/reference/lightsail/index.html#cli-aws-lightsail

CIS Controls

Profile

Level 1 | Manual