Cis Azure Compute 2.3.10

Ensure incoming client certificates are enabled and required (if in use)

Description

Client certificates allow for the function app to request a certificate for incoming requests. Only clients that have a valid certificate will be able to reach the app.

Rationale

The TLS mutual authentication technique in enterprise environments ensures the authenticity of clients to the server. If incoming client certificates are enabled, then only an authenticated client with valid certificates can access the app.

Impact

Utilizing and maintaining client certificates will require additional work to obtain and manage replacement and key rotation.

NOTE: This recommendation cannot be implemented if following the recommendation titled "Ensure 'HTTP Version' is set to '2.0' (if in use)." This recommendation should only be considered for scenarios where HTTP versions prior to 2.0 are required for an app, and mutual certificate authentication is desired for validating clients.

Audit Procedure

Using Azure Portal

1. Go to App Services or Function App.
2. Click the name of a function app.
3. Under Settings, click Configuration.
4. In the General settings pane, under Incoming client certificates, ensure that Client certificate mode is set to Required.
5. Repeat steps 1-4 for each function app.

Using Azure CLI

Run the following command to list function apps:

az functionapp list

For each function app, run the following command to get the clientCertEnabled and clientCertMode settings:

az functionapp show --resource-group <resource-group-name> --name <function-app-name> --query "[clientCertEnabled, clientCertMode]"

Ensure that [true,"Required"] is returned.

Expected Result

Client certificate mode should be enabled and set to Required ([true,"Required"]).

Remediation

Using Azure Portal

1. Go to App Services or Function App.
2. Click the name of a function app.
3. Under Settings, click Configuration.
4. In the General settings pane, under Incoming client certificates, set Client certificate mode to Required.
5. Click Save.
6. Click Continue.
7. Repeat steps 1-6 for each function app requiring remediation.

Using Azure CLI

For each function app requiring remediation, run the following command to enable and require incoming client certificates:

az resource update --resource-group <resource-group-name> --name <function-app-name> --resource-type "Microsoft.Web/sites" --set properties.clientCertEnabled=true --set properties.clientCertMode=Required

Default Value

By default, incoming client certificates are disabled.

References

1. https://learn.microsoft.com/en-us/security/benchmark/azure/security-controls-v3-identity-management#im-4-authenticate-server-and-services
2. https://learn.microsoft.com/en-gb/azure/app-service/app-service-web-configure-tls-mutual-auth
3. https://learn.microsoft.com/en-us/cli/azure/functionapp
4. https://learn.microsoft.com/en-us/cli/azure/resource

Profile

Level 2 | Automated