cyberstrikeus CIS Ubuntu Linux 16.04 LTS Benchmark v2.0.0 - Control 3.5.2.6
Profile
- Level: Level 1 - Server, Level 1 - Workstation
- Assessment Status: Automated
Description
Configure the loopback interface to accept traffic. Configure all other interfaces to deny traffic to the loopback network.
Rationale
Loopback traffic is generated between processes on machine and is typically critical to operation of the system. The loopback interface is the only place that loopback network traffic should be seen, all other interfaces should ignore traffic on this network as an anti-spoofing measure.
Audit Procedure
Command Line
Run the following commands to verify that the loopback interface is configured:
nft list ruleset | awk '/hook input/,/}/' | grep 'iif "lo" accept'
nft list ruleset | awk '/hook input/,/}/' | grep 'ip saddr'
IF IPv6 is enabled on the system, run the following command to verify that the IPv6 loopback interface is configured:
nft list ruleset | awk '/hook input/,/}/' | grep 'ip6 saddr'
Expected Result
iif "lo" accept
ip saddr 127.0.0.0/8 counter packets 0 bytes 0 drop
ip6 saddr ::1 counter packets 0 bytes 0 drop
Remediation
Command Line
Run the following commands to implement the loopback rules:
nft add rule inet filter input iif lo accept
nft create rule inet filter input ip saddr 127.0.0.0/8 counter drop
IF IPv6 is enabled on the system, run the following command to implement the IPv6 loopback rule:
nft add rule inet filter input ip6 saddr ::1 counter drop
References
None
CIS Controls
Version 7
9.4 Apply Host-based Firewalls or Port Filtering - Apply host-based firewalls or port filtering tools on end systems, with a default-deny rule that drops all traffic except those services and ports that are explicitly allowed.