Cis Ubuntu2004 V300 7 2 10

7.2.10 Ensure local interactive user dot files access is configured (Automated)

Profile

• Level 1 - Server
• Level 1 - Workstation

Description

While the system administrator can establish secure permissions for users' "dot" files, the users can easily override these.

• .forward file specifies an email address to forward the user's mail to.
• .rhost file provides the "remote authentication" database for the rcp, rlogin, and rsh commands and the rcmd() function. These files bypass the standard password-based user authentication mechanism. They specify remote hosts and users that are considered trusted (i.e. are allowed to access the local system without supplying a password)
• .netrc file contains data for logging into a remote host or passing authentication to an API.
• .bash_history file keeps track of the user's commands.

Rationale

User configuration files with excessive or incorrect access may enable malicious users to steal or modify other users' data or to gain another user's system privileges.

Impact

None

Audit Procedure

Command Line

Run the following script to verify local interactive user dot files:

• Don't include .forward, .rhost, or .netrc files
• Are mode 0644 or more restrictive
• Are owned by the local interactive user
• Are group owned by the user's primary group
• .bash_history is mode 0600 or more restrictive

Note: If a .netrc file is required, and follows local site policy, it should be mode 0600 or more restrictive.

#!/usr/bin/env bash

{
    a_output2=(); a_output3=()
    l_maxsize="1000" # Maximum number of local interactive users before warning (Default 1,000)
    l_valid_shells="^$(awk -F\/ '$NF != "nologin" {print}' /etc/shells | sed -rn '/^\//{s,/,\\/,g;p}' | paste -s -d '|' - ))$"
    a_user_and_home=() # Create array with local users and their home directories
    while read -r l_local_user l_local_user_home; do # Populate array with users and user home location
        [[ -n "$l_local_user" && -n "$l_local_user_home" ]] &&
        a_user_and_home+=("$l_local_user:$l_local_user_home")
    done <<< "$(awk -v pat="$l_valid_shells" -F: '$(NF) ~ pat { print $1 " " $(NF-1) }' /etc/passwd)"
    [ "${#a_user_and_home[@]}" -gt "$l_maxsize" ] && printf '%s\n' "" " ** INFO **" \
    " - \"$l_asize\" Local interactive users found on the system" \
    " - This may be a long running check" ""
    file_access_chk()
    {
        a_access_out=()
        l_max="$(printf '%o' $(( 0777 & ~$l_mask)) )"
        if [ $(( $l_mode & $l_mask )) -gt 0 ]; then
            a_access_out+=(" - File: \"$l_hdfile\" is mode: \"$l_mode\" and should be mode: \"$l_max\" or more restrictive")
        fi
        if [[ ! "$l_owner" =~ ($l_user) ]]; then
            a_access_out+=(" - File: \"$l_hdfile\" owned by: \"$l_owner\" and should be owned by \"${l_user//|/ or }\"")
        fi
        if [[ ! "$l_gowner" =~ ($l_group) ]]; then
            a_access_out+=(" - File: \"$l_hdfile\" group owned by: \"$l_gowner\" and should be group owned by \"${l_group//|/ or }\"")
        fi
    }
    while IFS=: read -r l_user l_home; do
        a_dot_file=(); a_netrc=(); a_netrc_warn=(); a_bhout=(); a_hdirout=()
        if [ -d "$l_home" ]; then
            l_group="$(id -gn "$l_user" | xargs)";l_group="${l_group// |/}"
            while IFS= read -r -d $'\0' l_hdfile; do
                while read -r l_mode l_owner l_gowner; do
                    case "$(basename "$l_hdfile")" in
                        .forward | .rhost )
                            a_dot_file+=(" - File: \"$l_hdfile\" exists") ;;
                        .netrc )
                            l_mask='0177'; file_access_chk
                            if [ "${#a_access_out[@]}" -gt 0 ]; then
                                a_netrc+=("${a_access_out[@]}")
                            else
                                a_netrc_warn+=(" - File: \"$l_hdfile\" exists")
                            fi ;;
                        .bash_history )
                            l_mask='0177'; file_access_chk
                            [ "${#a_access_out[@]}" -gt 0 ] && a_bhout+=("${a_access_out[@]}") ;;
                        * )
                            l_mask='0133'; file_access_chk
                            [ "${#a_access_out[@]}" -gt 0 ] && a_hdirout+=("${a_access_out[@]}") ;;
                    esac
                done < <(stat -Lc '%#a %U %G' "$l_hdfile")
            done < <(find "$l_home" -xdev -type f -name '.*' -print0)
        fi
        if [[ "${#a_dot_file[@]}" -gt 0 || "${#a_netrc[@]}" -gt 0 || "${#a_bhout[@]}" -gt 0 || "${#a_hdirout[@]}" -gt 0 ]]; then
            a_output2+=(" - User: \"$l_user\" Home Directory: \"$l_home\"" "${a_dot_file[@]}" "${a_netrc[@]}" "${a_bhout[@]}" "${a_hdirout[@]}")
        fi
        [ "${#a_netrc_warn[@]}" -gt 0 ] && a_output3+=(" - User: \"$l_user\" Home Directory: \"$l_home\"" "${a_netrc_warn[@]}")
    done <<< "$(printf '%s\n' "${a_user_and_home[@]}")"
    if [ "${#a_output2[@]}" -le 0 ]; then
        [ "${#a_output3[@]}" -gt 0 ] && printf '%s\n' " ** WARNING **" "${a_output3[@]}"
        printf '%s\n' "" "- Audit Result:" " ** PASS **"
    else
        printf '%s\n' "" "- Audit Result:" " ** FAIL **" " - * Reasons for audit failure * :" "${a_output2[@]}" ""
        [ "${#a_output3[@]}" -gt 0 ] && printf '%s\n' " ** WARNING **" "${a_output3[@]}"
    fi
}

Expected Result

PASS -- All local interactive user dot files are properly configured.

Remediation

Command Line

Making global modifications to users' files without alerting the user community can result in unexpected outages and unhappy users. Therefore, it is recommended that a monitoring policy be established to report user dot file permissions and determine the action to be taken in accordance with site policy.

The following script will:

• remove excessive permissions on dot files within interactive users' home directories
• change ownership of dot files within interactive users' home directories to the user
• change group ownership of dot files within interactive users' home directories to the user's primary group
• list .forward and .rhost files to be investigated and manually deleted

#!/usr/bin/env bash

{
    a_output2=(); a_output3=()
    l_maxsize="1000" # Maximum number of local interactive users before warning (Default 1,000)
    l_valid_shells="^$(awk -F\/ '$NF != "nologin" {print}' /etc/shells | sed -rn '/^\//{s,/,\\/,g;p}' | paste -s -d '|' - ))$"
    a_user_and_home=() # Create array with local users and their home directories
    while read -r l_local_user l_local_user_home; do # Populate array with users and user home location
        [[ -n "$l_local_user" && -n "$l_local_user_home" ]] &&
        a_user_and_home+=("$l_local_user:$l_local_user_home")
    done <<< "$(awk -v pat="$l_valid_shells" -F: '$(NF) ~ pat { print $1 " " $(NF-1) }' /etc/passwd)"
    [ "${#a_user_and_home[@]}" -gt "$l_maxsize" ] && printf '%s\n' "" " ** INFO **" \
    " - \"$l_asize\" Local interactive users found on the system" \
    " - This may be a long running check" ""
    file_access_fix()
    {
        a_access_out=()
        l_max="$(printf '%o' $(( 0777 & ~$l_mask)) )"
        if [ $(( $l_mode & $l_mask )) -gt 0 ]; then
            printf '%s\n' "" " - File: \"$l_hdfile\" is mode: \"$l_mode\" and should be mode: \"$l_max\" or more restrictive" \
            "   Updating file: \"$l_hdfile\" to be mode: \"$l_max\" or more restrictive"
            chmod "$l_change" "$l_hdfile"
        fi
        if [[ ! "$l_owner" =~ ($l_user) ]]; then
            printf '%s\n' "" " - File: \"$l_hdfile\" owned by: \"$l_owner\" and should be owned by \"${l_user//|/ or }\""
            "   Updating file: \"$l_hdfile\" to be owned by \"${l_user//|/ or }\""
            chown "$l_user" "$l_hdfile"
        fi
        if [[ ! "$l_gowner" =~ ($l_group) ]]; then
            printf '%s\n' "" " - File: \"$l_hdfile\" group owned by: \"$l_gowner\" and should be group owned by \"${l_group//|/ or }\""
            "   Updating file: \"$l_hdfile\" to be group owned by \"${l_group//|/ or }\""
            chgrp "$l_group" "$l_hdfile"
        fi
    }
    while IFS=: read -r l_user l_home; do
        a_dot_file=(); a_netrc=(); a_netrc_warn=(); a_bhout=(); a_hdirout=()
        if [ -d "$l_home" ]; then
            l_group="$(id -gn "$l_user" | xargs)";l_group="${l_group// |/}"
            while IFS= read -r -d $'\0' l_hdfile; do
                while read -r l_mode l_owner l_gowner; do
                    case "$(basename "$l_hdfile")" in
                        .forward | .rhost )
                            a_dot_file+=(" - File: \"$l_hdfile\" exists" " Please review and manually delete this file") ;;
                        .netrc )
                            l_mask='0177'; l_change="u-x,go-rwx"; file_access_fix
                            a_netrc_warn+=(" - File: \"$l_hdfile\" exists") ;;
                        .bash_history )
                            l_mask='0177'; l_change="u-x,go-rwx"; file_access_fix ;;
                        * )
                            l_mask='0133'; l_change="u-x,go-wx"; file_access_fix ;;
                    esac
                done < <(stat -Lc '%#a %U %G' "$l_hdfile")
            done < <(find "$l_home" -xdev -type f -name '.*' -print0)
        fi
        [ "${#a_dot_file[@]}" -gt 0 ] && a_output2+=(" - User: \"$l_user\" Home Directory: \"$l_home\"" "${a_dot_file[@]}")
        [ "${#a_netrc_warn[@]}" -gt 0 ] && a_output3+=(" - User: \"$l_user\" Home Directory: \"$l_home\"" "${a_netrc_warn[@]}")
    done <<< "$(printf '%s\n' "${a_user_and_home[@]}")"
    [ "${#a_output3[@]}" -gt 0 ] && printf '%s\n' " ** WARNING **" "${a_output3[@]}" ""
    [ "${#a_output2[@]}" -gt 0 ] && printf '%s\n' "" "${a_output2[@]}"
}

Default Value

N/A

References

1. NIST SP 800-53 Rev. 5: AC-3, MP-2

CIS Controls

MITRE ATT&CK Mappings: