T1547.012_print-processors

T1547.012 Print Processors

Sub-technique of: T1547

High-Level Description

Adversaries may abuse print processors to run malicious DLLs during system boot for persistence and/or privilege escalation. Print processors are DLLs that are loaded by the print spooler service, spoolsv.exe, during boot.

Adversaries may abuse the print spooler service by adding print processors that load malicious DLLs at startup. A print processor can be installed through the AddPrintProcessor API call with an account that has SeLoadDriverPrivilege enabled. Alternatively, a print processor can be registered to the print spooler service by adding the HKLM\SYSTEM\[CurrentControlSet or ControlSet001]\Control\Print\Environments\[Windows architecture: e.g., Windows x64]\Print Processors\[user defined]\Driver Registry key that points to the DLL.

For the malicious print processor to be correctly installed, the payload must be located in the dedicated system print-processor directory, that can be found with the GetPrintProcessorDirectory API call, or referenced via a relative path from this directory. After the print processors are installed, the print spooler service, which starts during boot, must be restarted in order for them to run.

The print spooler service runs under SYSTEM level permissions, therefore print processors installed by an adversary may run under elevated privileges.

Kill Chain Phase

• Persistence (TA0003)
• Privilege Escalation (TA0004)

Platforms: Windows

What to Check

• Identify if Print Processors technique is applicable to target environment
• Check Windows systems for indicators of Print Processors
• Verify mitigations are bypassed or absent (1 known mitigations)
• Assess detection coverage (1 detection strategies)

How to Test

Atomic Red Team Tests

The following tests are from Atomic Red Team and provide actionable ways to test this technique:

Atomic Test 1: Print Processors

Establishes persistence by creating a new print processor registry key under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Print Processors. The new print processor will point to a DLL which will be loaded by the spooler service after a reboot. The DLL will then create the file AtomicTest.txt in C:\Users\Public\ as validation that the test is successful.

Note: The test assumes a x64 Windows operating system.

The payload source code is based on a blog post by stmxcsr: https://stmxcsr.com/persistence/print-processor.html

Supported Platforms: windows Elevation Required: Yes

if( $(get-service -Name spooler).StartType -eq "Disabled") {Set-Service -Name "spooler" -StartupType Automatic}
net stop spooler
Copy-Item "$PathToAtomicsFolder\T1547.012\bin\AtomicTest.dll" C:\Windows\System32\spool\prtprocs\x64\AtomicTest.dll
reg add "HKLM\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Print Processors\AtomicRedTeam" /v "Driver" /d "AtomicTest.dll" /t REG_SZ /f
net start spooler
if(#{restart}){
  Restart-Computer
}

Manual Testing

If Atomic Red Team tests are not applicable, manually verify the technique by:

1. Identify Attack Surface: Determine if the target environment is susceptible to Print Processors by examining the target platforms (Windows).

2. Assess Existing Defenses: Review whether mitigations for T1547.012 are in place. If defenses are absent or misconfigured, this technique may be exploitable.

3. Execute Test: Use tools and methods described in the MITRE ATT&CK page and external references below.

Remediation Guide

M1018 User Account Management

Limit user accounts that can load or unload device drivers by disabling SeLoadDriverPrivilege.

Detection

Windows Detection Strategy for T1547.012 - Print Processor DLL Persistence

Risk Assessment

CWE Categories

References

• Microsoft AddPrintProcessor May 2018
• Microsoft Intro Print Processors
• ESET PipeMon May 2020
• Atomic Red Team - T1547.012
• MITRE ATT&CK - T1547.012