Daftai Video Subtitler

Video Subtitle Burner

Burn (hardcode) subtitle files into local video.

Scripts: All scripts are in scripts/ relative to this SKILL.md. CRITICAL: When running any bun scripts/... command, you MUST set the working directory (cwd) to this skill's base directory. Do NOT run from the user's project directory.

Priority Chain

User explicit input > Project EXTEND.md > User EXTEND.md > Built-in defaults

Workflow

- [ ] Step 0: Load preferences (EXTEND.md) ⛔ BLOCKING
- [ ] Step 1: Environment check (FFmpeg + libass + fonts)
- [ ] Step 2: Input files (video + subtitle + language detection)
- [ ] Step 3: Confirm mode (mono/bilingual/translate) ⚠️ skip if quick_mode=true
- [ ] Step 4: Preprocess (timeline fix, format convert, merge, translate)
- [ ] Step 5: Burn subtitles + watermark/source label
- [ ] Step 6: Output report

Flow

Input → [Step 0: Preferences] ─┬─ Found → Load summary → Continue
                                └─ Not found → First-time setup ⛔ → Save EXTEND.md → Continue
        ↓
[Step 1: Env Check] → FFmpeg + libass + fonts
        ↓
[Step 2: Input Files] → Video + subtitle scan + language detect + timeline offset check
        ↓
[Step 3: Confirm Mode] → Mono / Bilingual / Translate ⚠️ skippable
        ↓
[Step 4: Preprocess] ─┬─ Timeline fix (if offset)
                      ├─ VTT → SRT convert (if merge/translate)
                      ├─ Bilingual merge (if needed)
                      └─ Translate subtitle (if needed)
        ↓
[Step 5: Burn] ─┬─ Subtitle hardcode
                ├─ Watermark overlay (if enabled)
                └─ Source label overlay (if enabled)
        ↓
[Step 6: Output] → File path + size + preview command

Step 0: Load Preferences ⛔ BLOCKING

Check EXTEND.md (project-level first, then user-level):

test -f .daftAI-skills/daftAI-video-subtitler/EXTEND.md && echo "project"
test -f "$HOME/.daftAI-skills/daftAI-video-subtitler/EXTEND.md" && echo "user"

CRITICAL: Must complete setup before asking ANY other questions.

Step 1: Environment Check

Goal: Ensure FFmpeg and fonts are available

1. Detect FFmpeg and libass:

   ffmpeg -version
   ffmpeg -filters 2>&1 | grep subtitles
   

2. Detect font (by priority, respecting preferences):

   • Preferred font from EXTEND.md → use if available
   • Alibaba PuHuiTi 3.0 → use if available
   • Noto Sans CJK → use if available
   • Fallback → system default

If missing libass:

• macOS: brew install ffmpeg
• Ubuntu: sudo apt install ffmpeg libass-dev

Step 2: Input Files

Goal: Get video and subtitle files

1. User provides video path (mp4, mkv, avi, etc.)

2. Auto-scan subtitles in same directory:

   • Prefer same-name subtitle (video.mp4 → video.srt)
   • Single subtitle → use directly
   • Multiple subtitles → list for user to choose

3. Supported formats: .srt, .vtt, .ass, .ssa

4. Timeline offset detection (MUST execute):

   ffprobe -v error -show_entries format=duration -of default=noprint_wrappers=1:nokey=1 "<video_path>"
   

   If subtitle start time > video duration → offset detected, needs fix.

5. VTT → SRT conversion only when merging or translating:

   bun scripts/convert_vtt_to_srt.ts "<vtt_path>" "<srt_output>"
   

6. Auto-detect language:

   • From filename (subtitles_zh.srt → zh)
   • From content (Chinese characters → zh, Japanese kana → ja)

Step 3: Confirm Mode

Goal: Confirm mono/bilingual/translate + source label

Language: Use user's input language or preferred language for all questions. Do not always use English.

Use single AskUserQuestion with multiple questions when confirmation is needed.

⚠️ If quick_mode: true in preferences and intent is clear, skip subtitle confirmation. Source label still asked each time.

1. Ask user (only when preferences insufficient):

   • Bilingual subtitles? (select second subtitle file)
   • Translation needed? (only when user explicitly requests)

2. Source label (ask every time): If source_label.enabled: true in preferences:

   What's the source for this video? (will display as "素材来自于 XXX")

Step 4: Preprocess

Goal: Prepare final subtitle file

CRITICAL: Translated/merged subtitle artifacts MUST be kept by default for reuse. Detection-only process artifacts (screenshots/probe logs/temp checks) should be cleaned up by default unless debugging is requested.

4a: Translate (if needed)

Trigger: User explicitly requests translation.

Output path: <output_dir>/<video_name>_<target_lang>.srt (e.g., output/video_zh.srt)

Principles: Accuracy first, natural flow, concise.

1. Accuracy: Preserve original meaning
2. Fluency: Natural target language word order
3. Conciseness: Conversational tone, no redundancy
4. Consistency: Same term = same translation throughout
5. Punctuation: No period (。) at end of subtitle lines for zh

Term mapping:

Batch: Translate 20 lines per batch.

Count validation (MUST execute):

• After translation: translated count MUST equal original count
• If mismatch → fix it. NEVER say "only off by one, close enough"
• Verify: grep -c "^[0-9]\+$" <original> vs grep -c "^[0-9]\+$" <translated>

4b: Bilingual Merge (if needed)

Output path: <output_dir>/<video_name>_bilingual.srt (e.g., output/video_bilingual.srt)

bun scripts/merge_bilingual_subtitles.ts \
  "<top_subtitle.srt>" \
  "<bottom_subtitle.srt>" \
  "<output_dir>/<video_name>_bilingual.srt"

Order: from preferences bilingual.order, fallback to default (Chinese top, English bottom).

Step 5: Burn Subtitles

Goal: Hardcode subtitles into video

bun scripts/burn_subtitles.ts \
  "<video_path>" \
  "<subtitle_path>" \
  "<output_path>" \
  [--font-size <数字>] \
  [--outline <数字>] \
  [--margin-v <数字>] \
  [--crf <数字>] \
  [--watermark-text <文字>] \
  [--watermark-position <top-left|top-right|bottom-left|bottom-right>] \
  [--watermark-opacity <0-1>] \
  [--source-text <文字>] \
  [--source-position <top-left|top-right|bottom-left|bottom-right>] \
  [--source-opacity <0-1>]

All -- options are optional and fall back to EXTEND.md preferences or built-in defaults.

Parameters (from preferences, fallback to defaults):

Step 6: Output Report

Goal: Show results

1. Output directory: from preferences output.directory, fallback to ./output/

2. Naming (from preferences output.naming, fallback to defaults):

   • Mono: video_zh.mp4
   • Bilingual: video_zh-en.mp4

3. Intermediate files policy:

   • Keep generated translated subtitles (e.g., subtitle_zh.srt)
   • Keep generated bilingual merged subtitles (e.g., bilingual.srt)
   • Clean detection-only process artifacts by default (screenshots/probe logs/temp checks)
   • If debugging is required, set artifacts.keep_screenshots / artifacts.keep_probe_logs to true

4. Show user:

   • Output file path
   • File size
   • Intermediate file paths (if any)
   • Preview: open "<output_path>"

Error Handling

Examples

Mono subtitle:

User: Add Chinese subtitles to this video
→ Load prefs → Env check → Scan subtitles → Burn → output video_zh.mp4

Bilingual:

User: Add both Chinese and English subtitles
→ Load prefs → Merge bilingual → Burn → output video_zh-en.mp4

Translate + burn:

User: Translate English subtitles to Chinese then burn
→ Load prefs → Translate → Burn → output video_zh.mp4

With watermark:

User: Add Chinese subtitles with @daftAI watermark
→ Load prefs → Env check → Scan subtitles → Burn (with watermark) → output video_zh.mp4

Extension

Customize via EXTEND.md. See Step 0 for paths.

Supports: font | size | outline | margin | color | CRF | bilingual order | output dir | naming | language | watermark | source label | quick mode | artifacts policy

Schema: references/config/preferences-schema.md

References