Dd Sdk Ios:running Tests

Running Tests in dd-sdk-ios

Two Approaches

1. Makefile — CI workflows, full module suites

Use make to replicate CI exactly. Always prefer this for running a full module or all modules.

Before running: verify available simulators and pick an appropriate device name:

xcrun simctl list devices available | grep -E "iPhone|Apple TV"

Default devices (authoritative values from Makefile):

grep "DEFAULT_" Makefile

Always pass DEVICE= explicitly if the default simulator is not installed locally. Check xcrun simctl list devices available first.

Module scheme names: Always read the Makefile to get the authoritative list — it changes as modules are added or renamed:

grep "test-ios-all" Makefile -A 20  # shows all iOS schemes used in CI

2. Xcode MCP — selective, fast, single test or class

Requires Xcode 26.3+ with the Xcode MCP server enabled in Claude Code settings.

Before using Xcode MCP, verify the setup:

1. Check Xcode version: xcodebuild -version
   • If Xcode < 26.3 → ask the user to upgrade Xcode
   • If Xcode ≥ 26.3 → check that XcodeListWindows is available
2. If XcodeListWindows is unavailable → ask the user to enable the Xcode MCP server in Xcode settings

RunSomeTests is limited to targets in the currently active Xcode scheme. The MCP has no tool to switch schemes — that must be done manually in Xcode.

Get the tabIdentifier (identifies the open Xcode workspace window):

XcodeListWindows()  # → tabIdentifier e.g. "windowtab1"

Check available targets first:

GetTestList(tabIdentifier: <tabIdentifier>)
# → lists targets in the active scheme only

If the test is in the active scheme, run it directly:

RunSomeTests(
  tabIdentifier: <tabIdentifier>,
  tests: [{
    targetName: "<targetName from GetTestList>",
    testIdentifier: "<TestClass>/<testMethod>()"
  }]
)

If the test is NOT in the active scheme, use xcodebuild -only-testing:

xcodebuild test \
  -workspace Datadog.xcworkspace \
  -scheme "<Module> <Platform>" \
  -destination 'platform=<Platform> Simulator,name=<Device>' \
  -only-testing:<TargetName>/<TestClass>/<testMethod>

To find which module owns a test:

XcodeGrep(tabIdentifier: <tabIdentifier>, pattern: "func <testName>", outputMode: "filesWithMatches")
# path reveals the module: DatadogInternal/Tests/... → scheme "DatadogInternal iOS"

Decision Guide

Need to run tests?
├── Full module or CI replication?
│   └── make test-ios SCHEME="<Module> iOS" DEVICE="<Device>"
└── Specific class or method?
    ├── Test is in the active Xcode scheme? (check GetTestList)
    │   └── RunSomeTests
    └── Test is in a different scheme?
        └── xcodebuild -only-testing (or ask user to switch scheme in Xcode)

Common Mistakes