Branch Code Reviewer

Branch Code Reviewer

AI-assisted code review of Datex Studio branches using the dxs CLI. Reads the branch's changes, traces dependencies of affected configs, reads unified diffs, and produces a structured review summary with explicit severity tags and a verdict.

References

• ../datex-studio-shared/branch-setup.md — Branch selection when the branch ID was not provided

Dependencies

• impact-analysis skill — invoked in Step 4 (Dimension F) whenever a changed config is a delete. It runs dxs source explore reverse-trace and categorizes callers, which is the authoritative way to decide whether a delete is safe. Do not emulate this manually with forward-traces — forward-trace cannot answer "is anything still referencing the deleted name?" (see the limitation note in Step 2).

Prerequisites

• Branch ID for a Datex Studio feature branch.

Workflow

[Step 1: Gather Context]
Parallel:
  dxs source changes --branch <ID>
  dxs source workitems --branch <ID> --description --comments
        |
[Step 2: Trace Dependencies of Changed Configs]
For each significantly-changed or deleted config:
  dxs source explore trace <config_name> --branch <ID>
        |
[Step 3: Review Diffs]
dxs source changes --branch <ID> --with-diffs
        |
[Step 4: Analyze Each Change]
For each changed config, evaluate against six dimensions:
  A. Bugs
  B. Code Quality
  C. Security
  D. Performance
  E. Simplification Opportunities
  F. Alignment & Risk
        |
[Step 5: Deeper Dive (as needed)]
If diffs are ambiguous:
  dxs source explore config <config_name> --branch <ID>
        |
[Step 6: Produce Review Summary]
Branch Overview → Changes Table → Detailed Findings (severity-tagged) →
Questions for Developer → Verdict

Step Details

Step 1: Gather Context

Run these two commands in parallel — they are independent:

dxs source changes --branch <ID>
dxs source workitems --branch <ID> --description --comments

The first gives a quick inventory of changed configs. The second gives the intent (bug / feature), the assignee, sprint context, and (via --comments) any in-thread discussion that might influence how a reviewer should read the change.

Step 2: Trace Dependencies of Changed Configs

dxs source explore trace <config_name> --branch <ID>

Trace shows a config's forward dependencies — what it references (datasources, flows, grids, dialogs, backend flows) and which library each one comes from.

When to trace:

• Deleted configs — trace them to see what they depended on. Then cross-reference with traces of other configs to check whether anything still references the deleted config by name.
• Configs with significant changes — trace to understand the structure (what flows does this editor call? what datasources does this grid use?) before reading the diff. Reading a diff with the dependency surface in mind is far more productive.
• Cross-library references — trace reveals when a config depends on shared platform flows (e.g., crud_create_flow from Utilities) or dialogs from other modules. These are the seams where breakage is most likely.

While tracing changed configs, watch for references to configs that this same branch deletes. A changed config whose trace still lists a just-deleted datasource or flow is a sign of incomplete cleanup — flag it, even though delete-safety itself is handled by impact-analysis in Step 4.

Limitation: trace shows forward deps only, never reverse. To check whether a deleted config is safe to remove, trace the configs that might reference it and look for the deleted name in their dependency lists.

Step 3: Review Diffs

dxs source changes --branch <ID> --with-diffs

Full unified diffs for every changed configuration. This is the primary input for Step 4.

Step 4: Analyze Each Change

For each changed config, evaluate against all six dimensions. Not every dimension applies to every config — skip dimensions where there is nothing to say, but consider each one before skipping.

A. Bugs

• Logic errors, off-by-one, inverted conditions
• Unhandled edge cases (null entities, empty collections)
• Error handling gaps (missing catch blocks, unchecked flow results)
• Dead code or unreachable paths introduced

B. Code Quality

• Is the intent of the change clear from reading the code?
• Does it match patterns used in surrounding code?
• Unnecessary duplication
• Meaningful variable names
• Proper use of platform APIs (Datex Studio helpers, $utils, $flows)

C. Security

• Unsanitized user input in expressions or templates
• Injection risks in dynamic filter expressions
• Sensitive data exposure in params, logging, or returned payloads
• Missing authorization checks on newly-exposed operations

D. Performance

• Unnecessary API calls or redundant data fetches
• N+1 query patterns in datasources
• Oversized payloads where a projection ($select/$expand with $select) would do
• Inefficient loops or repeated DOM operations

E. Simplification Opportunities

• Overly complex expressions that could be clearer
• Redundant null checks or optional chaining
• Duplicate logic across configs that could be shared
• Unused parameters or dead config properties

F. Alignment & Risk

• Work item alignment — does the change actually address the stated bug/feature?

• Fix altitude — is this a root-cause fix, or a workaround at the wrong layer? A UI-level remap (e.g. rewriting a bad TypeId in a binding) may mask a data-layer bug that will resurface everywhere else the entity is read. If you can't tell which was intended, raise it in Questions for Developer rather than guessing a severity.

• Scope creep — are there unrelated changes bundled in?

• Regression risk — could this break existing behavior?

• Deleted-config safety — is the deleted config truly unused elsewhere? For any config whose modification is delete in the changes inventory, invoke the impact-analysis skill with that reference name and the branch ID. It runs reverse-trace and returns the list of remaining callers. Fold the result into the review:

  • No callers → [OK] Safe to delete.
  • Callers exist and are updated in this same branch → [INFO] with the updated caller list for reference.
  • Callers exist and are NOT updated in this branch → [ISSUE] — the delete will break those callers at runtime.

  Do not try to emulate this with forward-traces. Forward-trace cannot answer "what still references this deleted name?" (see Step 2's limitation note).

Step 5: Deeper Dive (as needed)

Evaluate whether the diffs gave you enough context to make clear determinations. If not, read larger contiguous chunks of the affected configs so you can understand the surrounding logic:

dxs source explore config <config_name> --branch <ID>

This is especially important when a one-liner change looks like a fix but may introduce side effects that are only visible in the surrounding code. A diff without context can hide the fact that the "fix" breaks something else.

Step 6: Produce Review Summary

Use the exact structure in Output Format below. The severity tags are the primary signal for what a reviewer should act on.

Output Format

# Review — Branch <ID>

## Branch Overview
- **Branch:** <ID> (<status>)
- **Work Item:** <type> <NNNNNN> — <title>
- **Assigned to:** <Author>
- **Sprint:** <sprint name>

## Changes Table

| Config | Type | Action | Summary |
|---|---|---|---|
| `<name>` | <type> | <add/update/delete> | <one-line summary> |
| …      | …    | …                 | …                     |

## Detailed Findings

### Bugs
**`[ISSUE]` <headline>** (`<config>`)
<explanation, with inline code where helpful>

**`[WARNING]` <headline>** (`<config>`)
<explanation>

### Code Quality
…

### Security Concerns
…

### Performance
…

### Simplification Opportunities
…

### Work Item Alignment
…

### Scope
…

## Questions for Developer
1. <question>
2. <question>

## Verdict
**<Approve | Request Changes | Needs Discussion>** — <one-line rationale>.

Severity Tags

[OK] is worth including for dimensions that matter (security, alignment) so the reader knows the reviewer actually checked — an unmentioned dimension reads as "skipped", which is a different message.

Example (abbreviated)

## Detailed Findings

### Bugs

**`[ISSUE]` Duplicate error check in save flow (`custom_field_editor`)**
The new create path checks `result.reason` twice:

    if (result.reason) { /* show error */ } else { /* save option */ }
    if (result.reason) { /* show error AGAIN */ } else { ... }

If `result.reason` is truthy, the error dialog shows twice. Looks like a
refactor artifact — the option-saving logic was inserted in the middle,
duplicating the error branch.

**`[WARNING]` `save_result` is unused (`custom_field_editor`)**
`const save_result = await $flows.Utilities.crud_create_flow({...});` — the
result is captured but never checked. If the create fails silently, the UDF
is created but its initial option value is lost with no error shown.

### Security Concerns
**`[OK]`** No new injection vectors. The datasource filter uses a template
literal with `$datasource.inParams.custom_field_id`, which is a typed number
param — low risk.

## Questions for Developer
1. The TypeId 5→1 remap is applied at the binding level — is this a display
   fix, or does the API return the wrong TypeId and the data layer needs the
   fix instead?
2. `save_result` from creating the initial option value is never checked —
   is silent failure acceptable here?

## Verdict
**Request Changes** — the duplicate error handling will show two dialogs on
failure. The unchecked `save_result` is a secondary concern worth addressing.

Tips

1. Trace before you diff. Knowing what a config references changes how you read its diff. Five minutes in explore trace saves an hour of misreading a diff out of context.
2. Severity discipline. [ISSUE] means "must fix" — reserve it for real blockers. Overusing it trains reviewers to ignore the tag.
3. Don't restate the diff. The diff is already available. Your job is to name the problem (or the reason it's fine), not to paraphrase the code.
4. Alignment is the highest-value dimension. "The change does what the work item asked for" is the single most important question; it's easy to pass all the other dimensions and still ship the wrong thing.
5. Deleted configs deserve a trace sweep. A single missed reference can cause a runtime error in production. When in doubt, trace the top-N configs that might reference the deleted name.
6. Whitespace-only diffs are noise. Call them out as [INFO]; don't let them dilute the findings section.
7. When you can't tell intentional from accidental, ask. Some findings hinge on intent you can't see in the diff — is the unchecked flow result acceptable? Is the UI-level remap deliberate or a stopgap? Those belong in Questions for Developer, not in the findings with a guessed severity. A wrong [ISSUE] costs credibility; a sharp question gets an answer.

Common Mistakes