Omc Setup

OMC Setup

This is the only command you need to learn. After running this, everything else is automatic.

Note: All ~/.claude/... paths in this guide respect CLAUDE_CONFIG_DIR when that environment variable is set.

Pre-Setup Check: Already Configured?

CRITICAL: Before doing anything else, check if setup has already been completed. This prevents users from having to re-run the full setup wizard after every update.

# Check if setup was already completed
CONFIG_FILE="$HOME/.claude/.omc-config.json"

if [ -f "$CONFIG_FILE" ]; then
  SETUP_COMPLETED=$(jq -r '.setupCompleted // empty' "$CONFIG_FILE" 2>/dev/null)
  SETUP_VERSION=$(jq -r '.setupVersion // empty' "$CONFIG_FILE" 2>/dev/null)

  if [ -n "$SETUP_COMPLETED" ] && [ "$SETUP_COMPLETED" != "null" ]; then
    echo "OMC setup was already completed on: $SETUP_COMPLETED"
    [ -n "$SETUP_VERSION" ] && echo "Setup version: $SETUP_VERSION"
    ALREADY_CONFIGURED="true"
  fi
fi

If Already Configured (and no --force flag)

If ALREADY_CONFIGURED is true AND the user did NOT pass --force, --local, or --global flags:

Use AskUserQuestion to prompt:

Question: "OMC is already configured. What would you like to do?"

Options:

1. Update CLAUDE.md only - Download latest CLAUDE.md without re-running full setup
2. Run full setup again - Go through the complete setup wizard
3. Cancel - Exit without changes

If user chooses "Update CLAUDE.md only":

• Detect if local (.claude/CLAUDE.md) or global (~/.claude/CLAUDE.md) config exists
• If local exists, run the download/merge script from Step 2A
• If only global exists, run the download/merge script from Step 2B
• Skip all other steps
• Report success and exit

If user chooses "Run full setup again":

• Continue with Step 0 (Resume Detection) below

If user chooses "Cancel":

• Exit without any changes

Force Flag Override

If user passes --force flag, skip this check and proceed directly to setup.

Graceful Interrupt Handling

IMPORTANT: This setup process saves progress after each step. If interrupted (Ctrl+C or connection loss), the setup can resume from where it left off.

State File Location

• .omc/state/setup-state.json - Tracks completed steps

Resume Detection (Step 0)

Before starting any step, check for existing state:

# Check for existing setup state
STATE_FILE=".omc/state/setup-state.json"

# Cross-platform ISO date to epoch conversion
iso_to_epoch() {
  local iso_date="$1"
  local epoch=""
  # Try GNU date first (Linux)
  epoch=$(date -d "$iso_date" +%s 2>/dev/null)
  if [ $? -eq 0 ] && [ -n "$epoch" ]; then
    echo "$epoch"
    return 0
  fi
  # Try BSD/macOS date
  local clean_date=$(echo "$iso_date" | sed 's/[+-][0-9][0-9]:[0-9][0-9]$//' | sed 's/Z$//' | sed 's/T/ /')
  epoch=$(date -j -f "%Y-%m-%d %H:%M:%S" "$clean_date" +%s 2>/dev/null)
  if [ $? -eq 0 ] && [ -n "$epoch" ]; then
    echo "$epoch"
    return 0
  fi
  echo "0"
}

if [ -f "$STATE_FILE" ]; then
  # Check if state is stale (older than 24 hours)
  TIMESTAMP_RAW=$(jq -r '.timestamp // empty' "$STATE_FILE" 2>/dev/null)
  if [ -n "$TIMESTAMP_RAW" ]; then
    TIMESTAMP_EPOCH=$(iso_to_epoch "$TIMESTAMP_RAW")
    NOW_EPOCH=$(date +%s)
    STATE_AGE=$((NOW_EPOCH - TIMESTAMP_EPOCH))
  else
    STATE_AGE=999999  # Force fresh start if no timestamp
  fi
  if [ "$STATE_AGE" -gt 86400 ]; then
    echo "Previous setup state is more than 24 hours old. Starting fresh."
    rm -f "$STATE_FILE"
  else
    LAST_STEP=$(jq -r ".lastCompletedStep // 0" "$STATE_FILE" 2>/dev/null || echo "0")
    TIMESTAMP=$(jq -r .timestamp "$STATE_FILE" 2>/dev/null || echo "unknown")
    echo "Found previous setup session (Step $LAST_STEP completed at $TIMESTAMP)"
  fi
fi

If state exists, use AskUserQuestion to prompt:

Question: "Found a previous setup session. Would you like to resume or start fresh?"

Options:

1. Resume from step $LAST_STEP - Continue where you left off
2. Start fresh - Begin from the beginning (clears saved state)

If user chooses "Start fresh":

rm -f ".omc/state/setup-state.json"
echo "Previous state cleared. Starting fresh setup."

Save Progress Helper

After completing each major step, save progress:

# Save setup progress (call after each step)
# Usage: save_setup_progress STEP_NUMBER
save_setup_progress() {
  mkdir -p .omc/state
  cat > ".omc/state/setup-state.json" << EOF
{
  "lastCompletedStep": $1,
  "timestamp": "$(date -Iseconds)",
  "configType": "${CONFIG_TYPE:-unknown}"
}
EOF
}

Clear State on Completion

After successful setup completion (Step 7/8), remove the state file:

rm -f ".omc/state/setup-state.json"
echo "Setup completed successfully. State cleared."

Usage Modes

This skill handles three scenarios:

1. Initial Setup (no flags): First-time installation wizard
2. Local Configuration (--local): Configure project-specific settings (.claude/CLAUDE.md)
3. Global Configuration (--global): Configure global settings (~/.claude/CLAUDE.md)

Mode Detection

Check for flags in the user's invocation:

• If --local flag present → Skip Pre-Setup Check, go to Local Configuration (Step 2A)
• If --global flag present → Skip Pre-Setup Check, go to Global Configuration (Step 2B)
• If --force flag present → Skip Pre-Setup Check, run Initial Setup wizard (Step 1)
• If no flags → Run Pre-Setup Check first, then Initial Setup wizard (Step 1) if needed

Step 1: Initial Setup Wizard (Default Behavior)

Note: If resuming and lastCompletedStep >= 1, skip to the appropriate step based on configType.

Use the AskUserQuestion tool to prompt the user:

Question: "Where should I configure oh-my-claudecode?"

Options:

1. Local (this project) - Creates .claude/CLAUDE.md in current project directory. Best for project-specific configurations.
2. Global (all projects) - Creates ~/.claude/CLAUDE.md for all Claude Code sessions. Best for consistent behavior everywhere.

Step 2A: Local Configuration (--local flag or user chose LOCAL)

CRITICAL: This ALWAYS downloads fresh CLAUDE.md from GitHub to the local project. DO NOT use the Write tool - use bash curl exclusively.

Create Local .claude Directory

# Create .claude directory in current project
mkdir -p .claude && echo ".claude directory ready"

Download Fresh CLAUDE.md

# Define target path
TARGET_PATH=".claude/CLAUDE.md"

# Extract old version before download
OLD_VERSION=$(grep -m1 "^# oh-my-claudecode" "$TARGET_PATH" 2>/dev/null | grep -oE 'v[0-9]+\.[0-9]+\.[0-9]+' || echo "none")

# Backup existing
if [ -f "$TARGET_PATH" ]; then
  BACKUP_DATE=$(date +%Y-%m-%d_%H%M%S)
  BACKUP_PATH="${TARGET_PATH}.backup.${BACKUP_DATE}"
  cp "$TARGET_PATH" "$BACKUP_PATH"
  echo "Backed up existing CLAUDE.md to $BACKUP_PATH"
fi

# Download fresh OMC content to temp file
TEMP_OMC=$(mktemp /tmp/omc-claude-XXXXXX.md)
trap 'rm -f "$TEMP_OMC"' EXIT
curl -fsSL "https://raw.githubusercontent.com/Yeachan-Heo/oh-my-claudecode/main/docs/CLAUDE.md" -o "$TEMP_OMC"

if [ ! -s "$TEMP_OMC" ]; then
  echo "ERROR: Failed to download CLAUDE.md. Aborting."
  rm -f "$TEMP_OMC"
  return 1
fi

# Strip existing markers from downloaded content (idempotency)
if grep -q '<!-- OMC:START -->' "$TEMP_OMC"; then
  # Extract content between markers (awk is portable across GNU/BSD)
  awk '/<!-- OMC:END -->/{p=0} p; /<!-- OMC:START -->/{p=1}' "$TEMP_OMC" > "${TEMP_OMC}.clean"
  mv "${TEMP_OMC}.clean" "$TEMP_OMC"
fi

if [ ! -f "$TARGET_PATH" ]; then
  # Fresh install: wrap in markers
  {
    echo '<!-- OMC:START -->'
    cat "$TEMP_OMC"
    echo '<!-- OMC:END -->'
  } > "$TARGET_PATH"
  rm -f "$TEMP_OMC"
  echo "Installed CLAUDE.md (fresh)"
else
  # Merge: preserve user content outside OMC markers
  if grep -q '<!-- OMC:START -->' "$TARGET_PATH"; then
    # Has markers: replace OMC section, keep user content
    # Use awk instead of sed for cross-platform compatibility (GNU/BSD)
    BEFORE_OMC=$(awk '/<!-- OMC:START -->/{exit} {print}' "$TARGET_PATH")
    AFTER_OMC=$(awk 'p; /<!-- OMC:END -->/{p=1}' "$TARGET_PATH")
    {
      [ -n "$BEFORE_OMC" ] && printf '%s\n' "$BEFORE_OMC"
      echo '<!-- OMC:START -->'
      cat "$TEMP_OMC"
      echo '<!-- OMC:END -->'
      [ -n "$AFTER_OMC" ] && printf '%s\n' "$AFTER_OMC"
    } > "${TARGET_PATH}.tmp"
    mv "${TARGET_PATH}.tmp" "$TARGET_PATH"
    echo "Updated OMC section (user customizations preserved)"
  else
    # No markers: wrap new content in markers, append old content as user section
    OLD_CONTENT=$(cat "$TARGET_PATH")
    {
      echo '<!-- OMC:START -->'
      cat "$TEMP_OMC"
      echo '<!-- OMC:END -->'
      echo ""
      echo "<!-- User customizations (migrated from previous CLAUDE.md) -->"
      printf '%s\n' "$OLD_CONTENT"
    } > "${TARGET_PATH}.tmp"
    mv "${TARGET_PATH}.tmp" "$TARGET_PATH"
    echo "Migrated existing CLAUDE.md (added OMC markers, preserved old content)"
  fi
  rm -f "$TEMP_OMC"
fi

# Extract new version and report
NEW_VERSION=$(grep -m1 "^# oh-my-claudecode" "$TARGET_PATH" 2>/dev/null | grep -oE 'v[0-9]+\.[0-9]+\.[0-9]+' || echo "unknown")
if [ "$OLD_VERSION" = "none" ]; then
  echo "Installed CLAUDE.md: $NEW_VERSION"
elif [ "$OLD_VERSION" = "$NEW_VERSION" ]; then
  echo "CLAUDE.md unchanged: $NEW_VERSION"
else
  echo "Updated CLAUDE.md: $OLD_VERSION -> $NEW_VERSION"
fi

Note: The downloaded CLAUDE.md includes Context Persistence instructions with <remember> tags for surviving conversation compaction.

Note: If an existing CLAUDE.md is found, it will be backed up to .claude/CLAUDE.md.backup.YYYY-MM-DD before downloading the new version.

MANDATORY: Always run this command. Do NOT skip. Do NOT use Write tool.

FALLBACK if curl fails: Tell user to manually download from: https://raw.githubusercontent.com/Yeachan-Heo/oh-my-claudecode/main/docs/CLAUDE.md

Verify Plugin Installation

grep -q "oh-my-claudecode" ~/.claude/settings.json && echo "Plugin verified" || echo "Plugin NOT found - run: claude /install-plugin oh-my-claudecode"

Confirm Local Configuration Success

After completing local configuration, save progress and report:

# Save progress - Step 2 complete (Local config)
mkdir -p .omc/state
cat > ".omc/state/setup-state.json" << EOF
{
  "lastCompletedStep": 2,
  "timestamp": "$(date -Iseconds)",
  "configType": "local"
}
EOF

OMC Project Configuration Complete

• CLAUDE.md: Updated with latest configuration from GitHub at ./.claude/CLAUDE.md
• Backup: Previous CLAUDE.md backed up to .claude/CLAUDE.md.backup.YYYY-MM-DD (if existed)
• Scope: PROJECT - applies only to this project
• Hooks: Provided by plugin (no manual installation needed)
• Agents: 28+ available (base + tiered variants)
• Model routing: Haiku/Sonnet/Opus based on task complexity

Note: This configuration is project-specific and won't affect other projects or global settings.

If --local flag was used, clear state and STOP HERE:

rm -f ".omc/state/setup-state.json"

Do not continue to HUD setup or other steps.

Step 2B: Global Configuration (--global flag or user chose GLOBAL)

CRITICAL: This ALWAYS downloads fresh CLAUDE.md from GitHub to global config. DO NOT use the Write tool - use bash curl exclusively.

Download Fresh CLAUDE.md

# Define target path
TARGET_PATH="$HOME/.claude/CLAUDE.md"

# Extract old version before download
OLD_VERSION=$(grep -m1 "^# oh-my-claudecode" "$TARGET_PATH" 2>/dev/null | grep -oE 'v[0-9]+\.[0-9]+\.[0-9]+' || echo "none")

# Backup existing
if [ -f "$TARGET_PATH" ]; then
  BACKUP_DATE=$(date +%Y-%m-%d_%H%M%S)
  BACKUP_PATH="${TARGET_PATH}.backup.${BACKUP_DATE}"
  cp "$TARGET_PATH" "$BACKUP_PATH"
  echo "Backed up existing CLAUDE.md to $BACKUP_PATH"
fi

# Download fresh OMC content to temp file
TEMP_OMC=$(mktemp /tmp/omc-claude-XXXXXX.md)
trap 'rm -f "$TEMP_OMC"' EXIT
curl -fsSL "https://raw.githubusercontent.com/Yeachan-Heo/oh-my-claudecode/main/docs/CLAUDE.md" -o "$TEMP_OMC"

if [ ! -s "$TEMP_OMC" ]; then
  echo "ERROR: Failed to download CLAUDE.md. Aborting."
  rm -f "$TEMP_OMC"
  return 1
fi

# Strip existing markers from downloaded content (idempotency)
if grep -q '<!-- OMC:START -->' "$TEMP_OMC"; then
  # Extract content between markers (awk is portable across GNU/BSD)
  awk '/<!-- OMC:END -->/{p=0} p; /<!-- OMC:START -->/{p=1}' "$TEMP_OMC" > "${TEMP_OMC}.clean"
  mv "${TEMP_OMC}.clean" "$TEMP_OMC"
fi

if [ ! -f "$TARGET_PATH" ]; then
  # Fresh install: wrap in markers
  {
    echo '<!-- OMC:START -->'
    cat "$TEMP_OMC"
    echo '<!-- OMC:END -->'
  } > "$TARGET_PATH"
  rm -f "$TEMP_OMC"
  echo "Installed CLAUDE.md (fresh)"
else
  # Merge: preserve user content outside OMC markers
  if grep -q '<!-- OMC:START -->' "$TARGET_PATH"; then
    # Has markers: replace OMC section, keep user content
    # Use awk instead of sed for cross-platform compatibility (GNU/BSD)
    BEFORE_OMC=$(awk '/<!-- OMC:START -->/{exit} {print}' "$TARGET_PATH")
    AFTER_OMC=$(awk 'p; /<!-- OMC:END -->/{p=1}' "$TARGET_PATH")
    {
      [ -n "$BEFORE_OMC" ] && printf '%s\n' "$BEFORE_OMC"
      echo '<!-- OMC:START -->'
      cat "$TEMP_OMC"
      echo '<!-- OMC:END -->'
      [ -n "$AFTER_OMC" ] && printf '%s\n' "$AFTER_OMC"
    } > "${TARGET_PATH}.tmp"
    mv "${TARGET_PATH}.tmp" "$TARGET_PATH"
    echo "Updated OMC section (user customizations preserved)"
  else
    # No markers: wrap new content in markers, append old content as user section
    OLD_CONTENT=$(cat "$TARGET_PATH")
    {
      echo '<!-- OMC:START -->'
      cat "$TEMP_OMC"
      echo '<!-- OMC:END -->'
      echo ""
      echo "<!-- User customizations (migrated from previous CLAUDE.md) -->"
      printf '%s\n' "$OLD_CONTENT"
    } > "${TARGET_PATH}.tmp"
    mv "${TARGET_PATH}.tmp" "$TARGET_PATH"
    echo "Migrated existing CLAUDE.md (added OMC markers, preserved old content)"
  fi
  rm -f "$TEMP_OMC"
fi

# Extract new version and report
NEW_VERSION=$(grep -m1 "^# oh-my-claudecode" "$TARGET_PATH" 2>/dev/null | grep -oE 'v[0-9]+\.[0-9]+\.[0-9]+' || echo "unknown")
if [ "$OLD_VERSION" = "none" ]; then
  echo "Installed CLAUDE.md: $NEW_VERSION"
elif [ "$OLD_VERSION" = "$NEW_VERSION" ]; then
  echo "CLAUDE.md unchanged: $NEW_VERSION"
else
  echo "Updated CLAUDE.md: $OLD_VERSION -> $NEW_VERSION"
fi

Note: If an existing CLAUDE.md is found, it will be backed up to ~/.claude/CLAUDE.md.backup.YYYY-MM-DD before downloading the new version.

Clean Up Legacy Hooks (if present)

Check if old manual hooks exist and remove them to prevent duplicates:

# Remove legacy bash hook scripts (now handled by plugin system)
rm -f ~/.claude/hooks/keyword-detector.sh
rm -f ~/.claude/hooks/stop-continuation.sh
rm -f ~/.claude/hooks/persistent-mode.sh
rm -f ~/.claude/hooks/session-start.sh
echo "Legacy hooks cleaned"

Check ~/.claude/settings.json for manual hook entries. If the "hooks" key exists with UserPromptSubmit, Stop, or SessionStart entries pointing to bash scripts, inform the user:

Note: Found legacy hooks in settings.json. These should be removed since the plugin now provides hooks automatically. Remove the "hooks" section from ~/.claude/settings.json to prevent duplicate hook execution.

Verify Plugin Installation

grep -q "oh-my-claudecode" ~/.claude/settings.json && echo "Plugin verified" || echo "Plugin NOT found - run: claude /install-plugin oh-my-claudecode"

Confirm Global Configuration Success

After completing global configuration, save progress and report:

# Save progress - Step 2 complete (Global config)
mkdir -p .omc/state
cat > ".omc/state/setup-state.json" << EOF
{
  "lastCompletedStep": 2,
  "timestamp": "$(date -Iseconds)",
  "configType": "global"
}
EOF

OMC Global Configuration Complete

• CLAUDE.md: Updated with latest configuration from GitHub at ~/.claude/CLAUDE.md
• Backup: Previous CLAUDE.md backed up to ~/.claude/CLAUDE.md.backup.YYYY-MM-DD (if existed)
• Scope: GLOBAL - applies to all Claude Code sessions
• Hooks: Provided by plugin (no manual installation needed)
• Agents: 28+ available (base + tiered variants)
• Model routing: Haiku/Sonnet/Opus based on task complexity

Note: Hooks are now managed by the plugin system automatically. No manual hook installation required.

If --global flag was used, clear state and STOP HERE:

rm -f ".omc/state/setup-state.json"

Do not continue to HUD setup or other steps.

Step 3: Setup HUD Statusline

Note: If resuming and lastCompletedStep >= 3, skip to Step 3.5.

The HUD shows real-time status in Claude Code's status bar. Invoke the hud skill to set up and configure:

Use the Skill tool to invoke: hud with args: setup

This will:

1. Install the HUD wrapper script to ~/.claude/hud/omc-hud.mjs
2. Configure statusLine in ~/.claude/settings.json
3. Report status and prompt to restart if needed

After HUD setup completes, save progress:

# Save progress - Step 3 complete (HUD setup)
mkdir -p .omc/state
CONFIG_TYPE=$(cat ".omc/state/setup-state.json" 2>/dev/null | grep -oE '"configType":\s*"[^"]+"' | cut -d'"' -f4 || echo "unknown")
cat > ".omc/state/setup-state.json" << EOF
{
  "lastCompletedStep": 3,
  "timestamp": "$(date -Iseconds)",
  "configType": "$CONFIG_TYPE"
}
EOF

Step 3.5: Clear Stale Plugin Cache

Clear old cached plugin versions to avoid conflicts:

# Clear stale plugin cache versions (cross-platform)
node -e "const p=require('path'),f=require('fs'),h=require('os').homedir(),d=process.env.CLAUDE_CONFIG_DIR||p.join(h,'.claude'),b=p.join(d,'plugins','cache','omc','oh-my-claudecode');try{const v=f.readdirSync(b).filter(x=>/^\d/.test(x)).sort((a,c)=>a.localeCompare(c,void 0,{numeric:true}));if(v.length<=1){console.log('Cache is clean');process.exit()}v.slice(0,-1).forEach(x=>{f.rmSync(p.join(b,x),{recursive:true,force:true})});console.log('Cleared',v.length-1,'stale cache version(s)')}catch{console.log('No cache directory found (normal for new installs)')}"

Step 3.6: Check for Updates

Notify user if a newer version is available:

# Detect installed version (cross-platform)
node -e "
const p=require('path'),f=require('fs'),h=require('os').homedir();
const d=process.env.CLAUDE_CONFIG_DIR||p.join(h,'.claude');
let v='';
// Try cache directory first
const b=p.join(d,'plugins','cache','omc','oh-my-claudecode');
try{const vs=f.readdirSync(b).filter(x=>/^\d/.test(x)).sort((a,c)=>a.localeCompare(c,void 0,{numeric:true}));if(vs.length)v=vs[vs.length-1]}catch{}
// Try .omc-version.json second
if(v==='')try{const j=JSON.parse(f.readFileSync('.omc-version.json','utf-8'));v=j.version||''}catch{}
// Try CLAUDE.md header third
if(v==='')for(const c of['.claude/CLAUDE.md',p.join(d,'CLAUDE.md')]){try{const m=f.readFileSync(c,'utf-8').match(/^# oh-my-claudecode.*?(v?\d+\.\d+\.\d+)/m);if(m){v=m[1].replace(/^v/,'');break}}catch{}}
console.log('Installed:',v||'(not found)');
"

# Check npm for latest version
LATEST_VERSION=$(npm view oh-my-claude-sisyphus version 2>/dev/null)

if [ -n "$INSTALLED_VERSION" ] && [ -n "$LATEST_VERSION" ]; then
  # Simple version comparison (assumes semantic versioning)
  if [ "$INSTALLED_VERSION" != "$LATEST_VERSION" ]; then
    echo ""
    echo "UPDATE AVAILABLE:"
    echo "  Installed: v$INSTALLED_VERSION"
    echo "  Latest:    v$LATEST_VERSION"
    echo ""
    echo "To update, run: claude /install-plugin oh-my-claudecode"
  else
    echo "You're on the latest version: v$INSTALLED_VERSION"
  fi
elif [ -n "$LATEST_VERSION" ]; then
  echo "Latest version available: v$LATEST_VERSION"
fi

Step 3.7: Set Default Execution Mode

Use the AskUserQuestion tool to prompt the user:

Question: "Which parallel execution mode should be your default when you say 'fast' or 'parallel'?"

Options:

1. ultrawork (maximum capability) - Uses all agent tiers including Opus for complex tasks. Best for challenging work where quality matters most. (Recommended)

Store the preference in ~/.claude/.omc-config.json:

# Read existing config or create empty object
CONFIG_FILE="$HOME/.claude/.omc-config.json"
mkdir -p "$(dirname "$CONFIG_FILE")"

if [ -f "$CONFIG_FILE" ]; then
  EXISTING=$(cat "$CONFIG_FILE")
else
  EXISTING='{}'
fi

# Set defaultExecutionMode (replace USER_CHOICE with "ultrawork" or "")
echo "$EXISTING" | jq --arg mode "USER_CHOICE" '. + {defaultExecutionMode: $mode, configuredAt: (now | todate)}' > "$CONFIG_FILE"
echo "Default execution mode set to: USER_CHOICE"

Note: This preference ONLY affects generic keywords ("fast", "parallel"). Explicit keywords ("ulw") always override this preference.

Step 3.8: Install OMC CLI Tool

The OMC CLI (omc command) provides standalone token analytics and management commands (omc stats, omc agents, omc tui).

First, check if the CLI is already installed:

# Check if omc CLI is already available
if command -v omc &>/dev/null; then
  OMC_CLI_VERSION=$(omc --version 2>/dev/null | head -1 || echo "installed")
  echo "OMC CLI already installed: $OMC_CLI_VERSION"
  OMC_CLI_INSTALLED="true"
else
  OMC_CLI_INSTALLED="false"
fi

If OMC_CLI_INSTALLED is "true", skip the rest of this step.

If OMC_CLI_INSTALLED is "false", use the AskUserQuestion tool to prompt the user:

Question: "Would you like to install the OMC CLI globally for standalone analytics? (omc stats, omc agents, omc tui)"

Options:

1. Yes (Recommended) - Install oh-my-claude-sisyphus via npm install -g
2. No - Skip - Skip installation (can install manually later with npm install -g oh-my-claude-sisyphus)

If user chooses Yes:

# Check if npm is available
if ! command -v npm &>/dev/null; then
  echo "WARNING: npm not found. Cannot install OMC CLI automatically."
  echo "Install Node.js/npm first, then run: npm install -g oh-my-claude-sisyphus"
else
  # Install the CLI globally
  if npm install -g oh-my-claude-sisyphus 2>&1; then
    echo "OMC CLI installed successfully."
    # Verify installation
    if command -v omc &>/dev/null; then
      OMC_CLI_VERSION=$(omc --version 2>/dev/null | head -1 || echo "installed")
      echo "Verified: omc $OMC_CLI_VERSION"
    else
      echo "Installed but 'omc' not on PATH. You may need to restart your shell."
    fi
  else
    echo "WARNING: Failed to install OMC CLI (permission issue or network error)."
    echo "You can install manually later: npm install -g oh-my-claude-sisyphus"
    echo "Or with sudo: sudo npm install -g oh-my-claude-sisyphus"
  fi
fi

If user chooses No - Skip, continue to the next step without installing.

Note: The CLI is optional. All core functionality is also available through the plugin system (/oh-my-claudecode:omc-help, /oh-my-claudecode:omc-doctor). The CLI adds standalone terminal commands for analytics outside of Claude Code sessions.

Step 3.8.5: Select Task Management Tool

First, detect available task tools:

# Detect beads (bd)
BD_VERSION=""
if command -v bd &>/dev/null; then
  BD_VERSION=$(bd --version 2>/dev/null | head -1 || echo "installed")
fi

# Detect beads-rust (br)
BR_VERSION=""
if command -v br &>/dev/null; then
  BR_VERSION=$(br --version 2>/dev/null | head -1 || echo "installed")
fi

# Report findings
if [ -n "$BD_VERSION" ]; then
  echo "Found beads (bd): $BD_VERSION"
fi
if [ -n "$BR_VERSION" ]; then
  echo "Found beads-rust (br): $BR_VERSION"
fi
if [ -z "$BD_VERSION" ] && [ -z "$BR_VERSION" ]; then
  echo "No external task tools found. Using built-in Tasks."
fi

If neither beads nor beads-rust is detected, skip this step (default to built-in).

If beads or beads-rust is detected, use AskUserQuestion:

Question: "Which task management tool should I use for tracking work?"

Options:

1. Built-in Tasks (default) - Use Claude Code's native TaskCreate/TodoWrite. Tasks are session-only.
2. Beads (bd) - Git-backed persistent tasks. Survives across sessions. [Only if detected]
3. Beads-Rust (br) - Lightweight Rust port of beads. [Only if detected]

(Only show options 2/3 if the corresponding tool is detected)

Store the preference:

CONFIG_FILE="$HOME/.claude/.omc-config.json"
mkdir -p "$(dirname "$CONFIG_FILE")"

if [ -f "$CONFIG_FILE" ]; then
  EXISTING=$(cat "$CONFIG_FILE")
else
  EXISTING='{}'
fi

# USER_CHOICE is "builtin", "beads", or "beads-rust" based on user selection
echo "$EXISTING" | jq --arg tool "USER_CHOICE" '. + {taskTool: $tool, taskToolConfig: {injectInstructions: true, useMcp: false}}' > "$CONFIG_FILE"
echo "Task tool set to: USER_CHOICE"

Note: The beads context instructions will be injected automatically on the next session start. No restart is needed for config to take effect.

Step 4: Verify Plugin Installation

grep -q "oh-my-claudecode" ~/.claude/settings.json && echo "Plugin verified" || echo "Plugin NOT found - run: claude /install-plugin oh-my-claudecode"

Step 5: Offer MCP Server Configuration

MCP servers extend Claude Code with additional tools (web search, GitHub, etc.).

Ask user: "Would you like to configure MCP servers for enhanced capabilities? (Context7, Exa search, GitHub, etc.)"

If yes, invoke the mcp-setup skill:

/oh-my-claudecode:mcp-setup

If no, skip to next step.

Step 5.5: Configure Agent Teams (Optional)

Note: If resuming and lastCompletedStep >= 5.5, skip to Step 6.

Agent teams are an experimental Claude Code feature that lets you spawn N coordinated agents working on a shared task list with inter-agent messaging. Teams are disabled by default and require enabling via settings.json.

Reference: https://code.claude.com/docs/en/agent-teams

Use the AskUserQuestion tool to prompt:

Question: "Would you like to enable agent teams? Teams let you spawn coordinated agents (e.g., /team 3:executor 'fix all errors'). This is an experimental Claude Code feature."

Options:

1. Yes, enable teams (Recommended) - Enable the experimental feature and configure defaults
2. No, skip - Leave teams disabled (can enable later)

If User Chooses YES:

Step 5.5.1: Enable Agent Teams in settings.json

CRITICAL: Agent teams require CLAUDE_CODE_EXPERIMENTAL_AGENT_TEAMS to be set in ~/.claude/settings.json. This must be done carefully to preserve existing user settings.

First, read the current settings.json:

SETTINGS_FILE="$HOME/.claude/settings.json"

if [ -f "$SETTINGS_FILE" ]; then
  echo "Current settings.json found"
  cat "$SETTINGS_FILE"
else
  echo "No settings.json found - will create one"
fi

Then use the Read tool to read ~/.claude/settings.json (if it exists). Use the Edit tool to merge the teams configuration while preserving ALL existing settings.

If settings.json exists and has an env key, merge the new env var into it:

{
  "env": {
    "CLAUDE_CODE_EXPERIMENTAL_AGENT_TEAMS": "1"
  }
}

Use jq to safely merge without overwriting existing settings:

SETTINGS_FILE="$HOME/.claude/settings.json"

if [ -f "$SETTINGS_FILE" ]; then
  # Merge env var into existing settings, preserving everything else
  TEMP_FILE=$(mktemp)
  jq '.env = (.env // {} | . + {"CLAUDE_CODE_EXPERIMENTAL_AGENT_TEAMS": "1"})' "$SETTINGS_FILE" > "$TEMP_FILE" && mv "$TEMP_FILE" "$SETTINGS_FILE"
  echo "Added CLAUDE_CODE_EXPERIMENTAL_AGENT_TEAMS to existing settings.json"
else
  # Create new settings.json with just the teams env var
  mkdir -p "$(dirname "$SETTINGS_FILE")"
  cat > "$SETTINGS_FILE" << 'SETTINGS_EOF'
{
  "env": {
    "CLAUDE_CODE_EXPERIMENTAL_AGENT_TEAMS": "1"
  }
}
SETTINGS_EOF
  echo "Created settings.json with teams enabled"
fi

IMPORTANT: The Edit tool is preferred for modifying settings.json when possible, since it preserves formatting and comments. The jq approach above is the fallback for when the file needs structural merging.

Step 5.5.2: Configure Teammate Display Mode

Use the AskUserQuestion tool:

Question: "How should teammates be displayed?"

Options:

1. Auto (Recommended) - Uses split panes if in tmux, otherwise in-process. Best for most users.
2. In-process - All teammates in your main terminal. Use Shift+Up/Down to select. Works everywhere.
3. Split panes (tmux) - Each teammate in its own pane. Requires tmux or iTerm2.

If user chooses anything other than "Auto", add teammateMode to settings.json:

SETTINGS_FILE="$HOME/.claude/settings.json"

# TEAMMATE_MODE is "in-process" or "tmux" based on user choice
# Skip this if user chose "Auto" (that's the default)
jq --arg mode "TEAMMATE_MODE" '. + {teammateMode: $mode}' "$SETTINGS_FILE" > "${SETTINGS_FILE}.tmp" && mv "${SETTINGS_FILE}.tmp" "$SETTINGS_FILE"
echo "Teammate display mode set to: TEAMMATE_MODE"

Step 5.5.3: Configure Team Defaults in omc-config

Use the AskUserQuestion tool with multiple questions:

Question 1: "How many agents should teams spawn by default?"

Options:

1. 3 agents (Recommended) - Good balance of speed and resource usage
2. 5 agents (maximum) - Maximum parallelism for large tasks
3. 2 agents - Conservative, for smaller projects

Question 2: "Which agent type should teammates use by default?"

Options:

1. executor (Recommended) - General-purpose code implementation agent
2. build-fixer - Specialized for build/type error fixing
3. designer - Specialized for UI/frontend work

Store the team configuration in ~/.claude/.omc-config.json:

CONFIG_FILE="$HOME/.claude/.omc-config.json"
mkdir -p "$(dirname "$CONFIG_FILE")"

if [ -f "$CONFIG_FILE" ]; then
  EXISTING=$(cat "$CONFIG_FILE")
else
  EXISTING='{}'
fi

# Replace MAX_AGENTS, AGENT_TYPE with user choices
echo "$EXISTING" | jq \
  --argjson maxAgents MAX_AGENTS \
  --arg agentType "AGENT_TYPE" \
  '. + {team: {maxAgents: $maxAgents, defaultAgentType: $agentType, monitorIntervalMs: 30000, shutdownTimeoutMs: 15000}}' > "$CONFIG_FILE"

echo "Team configuration saved:"
echo "  Max agents: MAX_AGENTS"
echo "  Default agent: AGENT_TYPE"
echo "  Model: teammates inherit your session model"

Note: Teammates do not have a separate model default. Each teammate is a full Claude Code session that inherits your configured model. Subagents spawned by teammates can use any model tier.

Verify settings.json Integrity

After all modifications, verify settings.json is valid JSON and contains the expected keys:

SETTINGS_FILE="$HOME/.claude/settings.json"

# Verify JSON is valid
if jq empty "$SETTINGS_FILE" 2>/dev/null; then
  echo "settings.json: valid JSON"
else
  echo "ERROR: settings.json is invalid JSON! Restoring from backup..."
  # The backup from Step 2 should still exist
  exit 1
fi

# Verify teams env var is present
if jq -e '.env.CLAUDE_CODE_EXPERIMENTAL_AGENT_TEAMS' "$SETTINGS_FILE" > /dev/null 2>&1; then
  echo "Agent teams: ENABLED"
else
  echo "WARNING: Agent teams env var not found in settings.json"
fi

# Show final settings.json for user review
echo ""
echo "Final settings.json:"
jq '.' "$SETTINGS_FILE"

If User Chooses NO:

Skip this step. Agent teams will remain disabled. User can enable later by adding to ~/.claude/settings.json:

{
  "env": {
    "CLAUDE_CODE_EXPERIMENTAL_AGENT_TEAMS": "1"
  }
}

Or by running /oh-my-claudecode:omc-setup --force and choosing to enable teams.

Save Progress

# Save progress - Step 5.5 complete (Teams configured)
mkdir -p .omc/state
CONFIG_TYPE=$(cat ".omc/state/setup-state.json" 2>/dev/null | grep -oE '"configType":\s*"[^"]+"' | cut -d'"' -f4 || echo "unknown")
cat > ".omc/state/setup-state.json" << EOF
{
  "lastCompletedStep": 5.5,
  "timestamp": "$(date -Iseconds)",
  "configType": "$CONFIG_TYPE"
}
EOF

Step 6: Detect Upgrade from 2.x

Check if user has existing configuration:

# Check for existing 2.x artifacts
ls ~/.claude/commands/ralph-loop.md 2>/dev/null || ls ~/.claude/commands/ultrawork.md 2>/dev/null

If found, this is an upgrade from 2.x.

Step 7: Show Welcome Message

For New Users:

OMC Setup Complete!

You don't need to learn any commands. I now have intelligent behaviors that activate automatically.

WHAT HAPPENS AUTOMATICALLY:
- Complex tasks -> I parallelize and delegate to specialists
- "plan this" -> I start a planning interview
- "don't stop until done" -> I persist until verified complete
- "stop" or "cancel" -> I intelligently stop current operation

MAGIC KEYWORDS (optional power-user shortcuts):
Just include these words naturally in your request:

| Keyword | Effect | Example |
|---------|--------|---------|
| ralph | Persistence mode | "ralph: fix the auth bug" |
| ralplan | Iterative planning | "ralplan this feature" |
| ulw | Max parallelism | "ulw refactor the API" |
| plan | Planning interview | "plan the new endpoints" |
| team | Coordinated agents | "/team 3:executor fix errors" |

**ralph includes ultrawork:** When you activate ralph mode, it automatically includes ultrawork's parallel execution. No need to combine keywords.

TEAMS:
Spawn coordinated agents with shared task lists and real-time messaging:
- /oh-my-claudecode:team 3:executor "fix all TypeScript errors"
- /oh-my-claudecode:team 5:build-fixer "fix build errors in src/"
Teams use Claude Code native tools (TeamCreate/SendMessage/TaskCreate).

MCP SERVERS:
Run /oh-my-claudecode:mcp-setup to add tools like web search, GitHub, etc.

HUD STATUSLINE:
The status bar now shows OMC state. Restart Claude Code to see it.

CLI ANALYTICS (if installed):
- omc           - Full dashboard (stats + agents + cost)
- omc stats     - View token usage and costs
- omc agents    - See agent breakdown by cost
- omc tui       - Launch interactive TUI dashboard

That's it! Just use Claude Code normally.

For Users Upgrading from 2.x:

OMC Setup Complete! (Upgraded from 2.x)

GOOD NEWS: Your existing commands still work!
- /ralph, /ultrawork, /plan, etc. all still function

WHAT'S NEW in 3.0:
You no longer NEED those commands. Everything is automatic now:
- Just say "don't stop until done" instead of /ralph
- Just say "fast" or "parallel" instead of /ultrawork
- Just say "plan this" instead of /plan
- Just say "stop" instead of /cancel

MAGIC KEYWORDS (power-user shortcuts):
| Keyword | Same as old... | Example |
|---------|----------------|---------|
| ralph | /ralph | "ralph: fix the bug" |
| ralplan | /ralplan | "ralplan this feature" |
| ulw | /ultrawork | "ulw refactor API" |
| plan | /plan | "plan the endpoints" |
| team | (new!) | "/team 3:executor fix errors" |

TEAMS (NEW!):
Spawn coordinated agents with shared task lists and real-time messaging:
- /oh-my-claudecode:team 3:executor "fix all TypeScript errors"
- Uses Claude Code native tools (TeamCreate/SendMessage/TaskCreate)

HUD STATUSLINE:
The status bar now shows OMC state. Restart Claude Code to see it.

CLI ANALYTICS (if installed):
- omc           - Full dashboard (stats + agents + cost)
- omc stats     - View token usage and costs
- omc agents    - See agent breakdown by cost
- omc tui       - Launch interactive TUI dashboard

Your workflow won't break - it just got easier!

Step 8: Ask About Starring Repository

First, check if gh CLI is available and authenticated:

gh auth status &>/dev/null

If gh is available and authenticated:

Before prompting, check if the repository is already starred:

gh api user/starred/Yeachan-Heo/oh-my-claudecode &>/dev/null

If already starred (exit code 0):

• Skip the prompt entirely
• Continue to next step silently

If NOT starred (exit code non-zero):

Use the AskUserQuestion tool to prompt the user:

Question: "If you're enjoying oh-my-claudecode, would you like to support the project by starring it on GitHub?"

Options:

1. Yes, star it! - Star the repository
2. No thanks - Skip without further prompts
3. Maybe later - Skip without further prompts

If user chooses "Yes, star it!":

gh api -X PUT /user/starred/Yeachan-Heo/oh-my-claudecode 2>/dev/null && echo "Thanks for starring! ⭐" || true

Note: Fail silently if the API call doesn't work - never block setup completion.

If gh is NOT available or not authenticated:

echo ""
echo "If you enjoy oh-my-claudecode, consider starring the repo:"
echo "  https://github.com/Yeachan-Heo/oh-my-claudecode"
echo ""

Clear Setup State and Mark Completion

After Step 8 completes (regardless of star choice), clear the temporary state and mark setup as completed:

# Setup complete - clear temporary state file
rm -f ".omc/state/setup-state.json"

# Mark setup as completed in persistent config (prevents re-running full setup on updates)
CONFIG_FILE="$HOME/.claude/.omc-config.json"
mkdir -p "$(dirname "$CONFIG_FILE")"

# Get current OMC version from CLAUDE.md
OMC_VERSION=""
if [ -f ".claude/CLAUDE.md" ]; then
  OMC_VERSION=$(grep -m1 "^# oh-my-claudecode" .claude/CLAUDE.md 2>/dev/null | grep -oE 'v[0-9]+\.[0-9]+\.[0-9]+' || echo "unknown")
elif [ -f "$HOME/.claude/CLAUDE.md" ]; then
  OMC_VERSION=$(grep -m1 "^# oh-my-claudecode" "$HOME/.claude/CLAUDE.md" 2>/dev/null | grep -oE 'v[0-9]+\.[0-9]+\.[0-9]+' || echo "unknown")
fi

if [ -f "$CONFIG_FILE" ]; then
  EXISTING=$(cat "$CONFIG_FILE")
else
  EXISTING='{}'
fi

# Add setupCompleted timestamp and version
echo "$EXISTING" | jq --arg ts "$(date -Iseconds)" --arg ver "$OMC_VERSION" \
  '. + {setupCompleted: $ts, setupVersion: $ver}' > "$CONFIG_FILE"

echo "Setup completed successfully!"
echo "Note: Future updates will only refresh CLAUDE.md, not the full setup wizard."

Keeping Up to Date

After installing oh-my-claudecode updates (via npm or plugin update):

Automatic: Just run /oh-my-claudecode:omc-setup - it will detect you've already configured and offer a quick "Update CLAUDE.md only" option that skips the full wizard.

Manual options:

• /oh-my-claudecode:omc-setup --local to update project config only
• /oh-my-claudecode:omc-setup --global to update global config only
• /oh-my-claudecode:omc-setup --force to re-run the full wizard (reconfigure preferences)

This ensures you have the newest features and agent configurations without the token cost of repeating the full setup.

Help Text

When user runs /oh-my-claudecode:omc-setup --help or just --help, display:

OMC Setup - Configure oh-my-claudecode

USAGE:
  /oh-my-claudecode:omc-setup           Run initial setup wizard (or update if already configured)
  /oh-my-claudecode:omc-setup --local   Configure local project (.claude/CLAUDE.md)
  /oh-my-claudecode:omc-setup --global  Configure global settings (~/.claude/CLAUDE.md)
  /oh-my-claudecode:omc-setup --force   Force full setup wizard even if already configured
  /oh-my-claudecode:omc-setup --help    Show this help

MODES:
  Initial Setup (no flags)
    - Interactive wizard for first-time setup
    - Configures CLAUDE.md (local or global)
    - Sets up HUD statusline
    - Checks for updates
    - Offers MCP server configuration
    - Configures team mode defaults (agent count, type, model)
    - If already configured, offers quick update option

  Local Configuration (--local)
    - Downloads fresh CLAUDE.md to ./.claude/
    - Backs up existing CLAUDE.md to .claude/CLAUDE.md.backup.YYYY-MM-DD
    - Project-specific settings
    - Use this to update project config after OMC upgrades

  Global Configuration (--global)
    - Downloads fresh CLAUDE.md to ~/.claude/
    - Backs up existing CLAUDE.md to ~/.claude/CLAUDE.md.backup.YYYY-MM-DD
    - Applies to all Claude Code sessions
    - Cleans up legacy hooks
    - Use this to update global config after OMC upgrades

  Force Full Setup (--force)
    - Bypasses the "already configured" check
    - Runs the complete setup wizard from scratch
    - Use when you want to reconfigure preferences

EXAMPLES:
  /oh-my-claudecode:

…(truncated)