Roblox Run And Operate

Roblox — Run and Operate (house stack)

Overview

This skill maps every way code and assets leave your editor and land in Roblox on the firebit house stack: the local dev loop, Studio automation, GitHub CI/CD, and the two ID-minting CLIs (rblxsync, asphalt). The core principle: local builds and dry-runs are always safe; anything that touches origin main/production or runs a live sync publishes to a real Roblox universe (canonical rules in roblox-change-control).

All commands run from the current project's repo root unless stated otherwise. Every project on this stack shares the same skeleton (Rojo + Wally + npm scripts + boilerplate workflows), but names, IDs, and script lists vary per project — verify against the current repo before quoting them.

When to use / When NOT to use

Use when you need to run the game, build a place file, drive Roblox Studio, understand CI, or operate rblxsync/asphalt.

Do NOT use for:

• Bootstrap, npm script internals, sourcemap traps, wally → roblox-build-and-env
• Test/playtest/storybook mechanics and evidence standards → roblox-validation-and-qa (and plugin commands /roblox-testing:test, /roblox-testing:playtest)
• The four hard rules' canonical statement and change gates → roblox-change-control
• Adding a new config axis or flag → roblox-config-and-flags
• Runtime debugging in a running game → skill roblox-debugging
• General Rojo/rblxsync theory → global skills rojo-pro, rblxsync

1. Dev loop anatomy

Definitions: Rojo syncs a filesystem tree into Roblox Studio (a "project file" like level.project.json declares that tree); an .rbxl is a binary Roblox place file; Wally is the Luau package manager.

House-standard npm scripts (per-place names vary — read package.json for the actual <place> list, e.g. level, lobby):

The .rbxl output filename is defined inside each build:<place> script. Built .rbxl outputs land in the repo root and are gitignored — check .gitignore before assuming.

The dev-loop caveat that bites everyone

rojo serve inside dev:<place> is invoked with no project argument, so it serves default.project.json — a code-only tree (Packages, DevPackages, src/Shared, src/Server, src/Client, and similar). The place you opened, however, was built from the per-place project file (level.project.json, lobby.project.json, ...), which additionally mounts Workspace geometry (assets/environment/* or equivalent), ReplicatedStorage.Assets, MaterialService, StarterGui, ServerStorage, and sometimes Lighting.

Practical consequences:

• After connecting the Rojo Studio plugin, Luau code edits live-sync; edits under assets/ do NOT. To see asset/environment changes, stop, rebuild (npm run dev:<place> again), reopen.
• The served tree includes DevPackages (Jest); built per-place places exclude DevPackages and **/*.spec.luau — so unit tests only exist when serve is connected or when using the default tree (details: roblox-validation-and-qa).
• If your change is in a project-file mount (StreamingEnabled, environment StringValues, CharacterAutoLoads=false, any property set in the .project.json), it only takes effect on rebuild, never via serve.

Verify what each project file mounts by reading it — never guess: cat default.project.json <place>.project.json.

2. Studio: connecting and driving it

Manual connect: open the built .rbxl in Studio, then in Studio's Plugins tab click the Rojo plugin → Connect (defaults to localhost:34872, Rojo's default port). Install the plugin from the Rojo VS Code extension or rojo plugin install if missing. UNVERIFIED: plugin install state on any given machine — check before assuming.

Scripted Studio (MCP): an MCP server named Roblox-Studio is available via the house plugins (roblox-testing@dig1t-plugins, install-ui-labs@dig1t-plugins in .claude/settings.json). Its .mcp.json launches /Applications/RobloxStudio.app/Contents/MacOS/StudioMCP --stdio (path verified on macOS in the reference setup). It exposes tools like start_stop_play, execute_luau, console_output, screen_capture, keyboard_input, search_game_tree. Studio must already be open with a place loaded for the proxy to have something to drive.

The scripted way to run tests/playtests is /roblox-testing:test (Jest suite in play mode) and /roblox-testing:playtest (scenario files under tests/scenarios/). Mechanics, scenario format, and pass/fail rules are owned by roblox-validation-and-qa — do not improvise your own play-mode harness.

For runtime breakpoint debugging through the same MCP tools, use the skill roblox-debugging.

3. CI/CD reality (boilerplate .github/workflows/)

Every house project carries the same boilerplate workflows. Verified against the reference repo 2026-07-05 — re-read the current project's copies before relying on details:

This is why hard rule 1 exists (never push origin main/production; canonical statement in roblox-change-control): there is no staging gate — a push to main uploads every place to the universe in the DEV_* repo variables, and a push to production uploads to PRODUCTION_* (the live game). Treat both branches as deploy triggers. Commits stay local until the owner pushes.

To confirm the dev↔main / live↔production mapping in the current project: gh variable list -R <owner>/<repo> and compare against the in-game identity constants (section 6).

Note the deploy path never runs tests or the linter — linting is PR-only. A direct push to main deploys unlinted code.

4. rblxsync operating procedure

rblxsync (aftman-pinned; dig1t/rblxsync@0.2.2 in the reference repo — check the current project's aftman.toml) declaratively syncs monetization metadata (game passes, dev products, badges, universe settings) from rblxsync.yml to Roblox Open Cloud, then generates src/Shared/Data/Monetization/Generated.luau (typed ID tables, "do not edit") and writes real IDs to rblxsync-lock.yml (commit both).

Agent-safe sequence (never mints anything on Roblox); run from the repo root:

rblxsync validate          # schema/config check
rblxsync run --dry-run     # preview the exact create/update plan

The live sync — rblxsync run with no flag — is owner-gated (hard rule 2, canonical in roblox-change-control): it mints real products and badges (badges cost 100 Robux each) and matches resources by case-sensitive NAME; a name mismatch between yml and live creates a duplicate product on Roblox. Agents may edit rblxsync.yml freely and dry-run it.

Standing facts to verify per project:

• Auth: ROBLOX_API_KEY in .env (gitignored). Confirm presence without printing: grep -c ROBLOX_API_KEY .env.
• Universe name/description in rblxsync.yml require cookie auth (ROBLOSECURITY in .env). If they are commented out, that usually means the cookie is stale — do not uncomment them without a fresh cookie, or every subsequent run fails. The lock file may carry stale name/description from a prior run.
• Which universe does rblxsync run target? Read universe.id in rblxsync.yml and compare against the dev/live identity table (section 6). In the reference project it targeted the live universe with no dev-universe config — assume the same until you check.
• Trace where each generated ID actually flows at runtime. Case study (shipped firebit game, 2026): badge IDs did NOT flow from Generated.luau — they were hand-pasted from the lock into a table in the game-data module, so every new badge needed that paste step after the owner's live run. Grep for consumers of the lock/Generated IDs before assuming codegen covers everything.
• Live resources deliberately left undeclared in yml (legacy or previous-era products) may exist — look for an explanatory comment above developer_products: in rblxsync.yml. Leaving them undeclared and untouched is intentional (hard rule 3 adjacent): do not "clean up" by declaring or deleting them.
• CLI subcommand mismatch (rblxsync 0.2.2): a yml header may recommend rblxsync export --output ... to reconcile names, but export emits Luau of existing resources; rblxsync import is the subcommand that pulls live metadata into rblxsync.yml + lock. Both are read-only against Roblox, but import rewrites your local manifest — diff before committing.

Deeper CLI theory: global skill rblxsync. Which products exist and their prices: roblox-config-and-flags / the project's rblxsync.yml itself. Subscriptions cannot be minted by rblxsync at all — a manual Creator Hub act.

5. asphalt (asset upload + ID codegen)

asphalt (aftman-pinned; jacktabscode/asphalt@1.0.0-pre.14 in the reference repo) uploads local asset files to Roblox and generates Luau modules mapping filename → rbxassetid:// URL, so code never hardcodes asset IDs.

House-standard wiring (read asphalt.toml for the current project's exact inputs):

Invocation (verified from asphalt --help / asphalt sync --help at the pinned version — NOT wrapped in any npm script; run manually from the repo root):

asphalt sync --dry-run     # preview what would upload (agent-safe)
asphalt sync               # OWNER-EXECUTED: upload to Roblox cloud + regenerate Images/Sounds.luau

• Auth: --api-key flag or ASPHALT_API_KEY env var (note: a different variable than rblxsync's ROBLOX_API_KEY; whether .env carries it is typically UNVERIFIED — .env is unread by design).
• Uploads go to the creator group set in asphalt.toml [creator] — read it, do not assume.
• --target studio syncs to local Studio instead of cloud; --target debug for inspection.
• A cloud sync uploads real assets to the studio's group. Per the change taxonomy in roblox-change-control ("Asset (asphalt)" row), the live asphalt sync is owner-executed: agents run asphalt sync --dry-run only and hand off — the same pattern as rblxsync run.

6. Identity table (dev vs live) — how to build it for your project

Never quote universe/place IDs from memory. Each project keeps its identity constants in a shared game-data module (in the reference repo: a GameData-style module under src/Shared/Data/Core/). Build the table fresh:

1. Grep for the constants: grep -rn "universeId\|placeId\|PlaceId" src/Shared/Data/
2. Cross-check the deploy targets: gh variable list -R <owner>/<repo> — DEV_* variables should equal the dev IDs (deployed on push to main) and PRODUCTION_* the live IDs (push to production).
3. Cross-check rblxsync.yml's universe.id against that table to know whether monetization syncs target dev or live.

Result: a table of dev vs live universe ID + one place ID per place. Record where each ID came from.

• A game.PlaceId == 0 check (often exposed as an isLocalFile-style flag in the game-data module) is true when running an unpublished built .rbxl in Studio — the normal state of the local dev loop.

7. What output lands where

Common mistakes

• Editing assets/environment/* and expecting the connected Rojo session to show it — serve is code-only (default.project.json); rebuild the place.
• Running rblxsync run "to test" — it is a live mint against the universe in rblxsync.yml. Dry-run only; the live run is the owner's.
• Running asphalt sync (no flag) as an agent — a live asset upload to the studio's group is owner-executed (roblox-change-control taxonomy); --dry-run only.
• Pushing to origin main to "save work" — that is a deploy. Keep commits local (roblox-change-control).
• Assuming Generated.luau is hand-editable, or assuming all IDs flow from it at runtime — Generated is machine-written, and some ID classes may be hand-pasted elsewhere (see the badge case study in section 4). Trace consumers.
• Using ROBLOX_API_KEY for asphalt — asphalt wants ASPHALT_API_KEY (or --api-key).
• Uncommenting the universe name/description in rblxsync.yml without a fresh ROBLOSECURITY cookie — every subsequent run fails.
• Following a yml header's rblxsync export --output ... literally and expecting YAML — at 0.2.2, export emits Luau; use rblxsync import for yml reconciliation (diff before committing).
• Expecting CI to lint or format your push — a direct branch push runs no checks at all (main additionally triggers deploy/docs); both format and lint are effectively PR-only in the boilerplate, because format.yml's push paths filter (src, not src/**) never matches files under src/. Confirm in the current project's copy.

Provenance and maintenance

Derived 2026-07-05 from the firebit house-stack reference project. Project-specific state (IDs, product lists, flag values) was removed; only the shared conventions remain. Re-verify volatile facts against the current project repo (run from its root):

# npm scripts (dev loop, place names, .rbxl output names)
cat package.json
# CI truth
ls .github/workflows/ && cat .github/workflows/deploy.yml
# Deploy target repo variables (dev↔main, live↔production mapping)
gh variable list -R <owner>/<repo>
# Universe/place IDs (identity constants)
grep -rn "universeId\|placeId" src/Shared/Data/
# rblxsync target universe + commented-out metadata + header notes
sed -n '1,90p' rblxsync.yml
# rblxsync CLI subcommands/flags (version pinned in aftman.toml)
cat aftman.toml && rblxsync --help && rblxsync run --help
# asphalt inputs/outputs, creator group, and CLI
cat asphalt.toml && asphalt sync --help
# Studio MCP server definition + binary (macOS)
cat ~/.claude/plugins/roblox-testing/.mcp.json && ls /Applications/RobloxStudio.app/Contents/MacOS/StudioMCP
# .env has the rblxsync key (do not print the value)
grep -c ROBLOX_API_KEY .env
# Version drift between source of truth and CI-written module
cat version.txt src/Shared/Config/Version.luau