Using And Extending Gdi Plus

Using and Extending GDI+ in WinForms

These rules apply when using GDI+ for drawing in the WinForms runtime and when adding new drawing APIs to System.Drawing. For control-level API additions (properties, events, etc.), see the new-control-api skill. For writing tests for rendering APIs, see the gdi-rendering-tests skill.

Golden rule: Cache what you can, dispose what you must, and always restore graphics state after modifying it.

1. Object Caching for Performance

1.1 Cached Pen and SolidBrush objects

WinForms provides a ref-counted caching mechanism for Pen and SolidBrush objects (RefCountedCache<TObject, TCacheEntryData, TKey>). Cached objects have implicit conversions that let them behave like their GDI+ counterparts while reducing allocation overhead.

1.2 Prefer SystemPens and SystemBrushes

SystemPens and SystemBrushes already provide cached objects. Always prioritize their usage (unless you need a non-default pen width). Objects obtained from these APIs must not be disposed:

// Good — already cached via SystemPens.
e.Graphics.DrawLine(SystemPens.ButtonHighlight, 0, bounds.Bottom - 1, bounds.Width, bounds.Bottom - 1);

1.3 Using scoped cached objects

When SystemPens/SystemBrushes do not have the color you need, prefer cached scopes over direct instantiation:

// INCORRECT — direct instantiation.
using (var pen = new Pen(Color.Red))
{
    g.DrawLine(pen, p1, p2);
}

// CORRECT — cached scope.
using var pen = Color.Red.GetCachedPenScope();
g.DrawLine(pen, p1, p2);

Available cached scopes:

// Default-width pen (width = 1)
using var pen = color.GetCachedPenScope();

// Custom-width pen (integer only)
using var thickPen = color.GetCachedPenScope(2);

// SolidBrush
using var brush = color.GetCachedSolidBrushScope();

Always use var for the scope type and always apply using.

When caching is not possible: If the pen needs additional configuration during its lifetime (e.g., DashStyle, CustomStartCap, Inset), you must use a non-cached pen/brush and dispose it explicitly.

1.4 Refactoring helpers to return scoped objects

When refactoring methods that return Pen or SolidBrush:

• For private helpers — change the return type to the scope type directly.
• For public/internal helpers — add a new scope-returning method and preserve the original.

// Before
private Pen GetHighlightPen() => new Pen(SystemColors.Highlight);

// After
private PenCache.Scope GetHighlightPenScope()
    => SystemColors.Highlight.GetCachedPenScope();

2. GraphicsInternal Usage

2.1 When to use GraphicsInternal

In WinForms control painting, prefer e.GraphicsInternal over e.Graphics for performance. GraphicsInternal avoids unnecessary state saves:

void Paint(PaintEventArgs e)
{
    e.GraphicsInternal.DrawRectangle(pen, rect);
}

Caveat: Do not pass GraphicsInternal to other methods — callees cannot distinguish it from a regular Graphics instance.

2.2 State management with GraphicsInternal

If you must modify the clip or transform, save and restore state:

GraphicsState? previousState = null;
try
{
    previousState = graphicsInternal.Save();
    graphicsInternal.TranslateTransform(x, y);
    graphicsInternal.SetClip(rect);
    // … draw …
}
finally
{
    if (previousState is not null)
    {
        graphicsInternal.Restore(previousState);
    }
}

3. Graphics Quality Settings

When changing quality settings, always restore the original value:

SmoothingMode originalMode = g.SmoothingMode;
try
{
    g.SmoothingMode = SmoothingMode.AntiAlias;
    // … draw …
}
finally
{
    g.SmoothingMode = originalMode;
}

Settings that must be preserved and restored:

• SmoothingMode
• TextRenderingHint
• InterpolationMode
• CompositingQuality
• PixelOffsetMode

4. Resource Management

4.1 Disposable objects

Always dispose GDI+ objects that cannot be cached:

using var customPen = new Pen(Color.Red) { DashStyle = DashStyle.Dash };
g.DrawLine(customPen, p1, p2);

4.2 GraphicsPath objects

Never cache GraphicsPath objects — always create, use, and dispose locally:

using GraphicsPath path = new();
path.AddEllipse(rect);
g.FillPath(brush, path);

4.3 Avoid premature disposal

Ensure objects remain valid throughout their usage. Do not pass a scoped object to something that may use it after the scope ends:

// INCORRECT — brush may be used after scope ends.
using (var brush = color.GetCachedSolidBrushScope())
{
    someObject.SomeFutureOperation(brush);
}

// CORRECT — immediate use within scope.
using var brush = color.GetCachedSolidBrushScope();
g.FillRectangle(brush, rect);

5. Adding New Drawing Primitives to Graphics

When adding new drawing APIs (e.g., DrawXxx / FillXxx methods) to the Graphics class or new path operations to GraphicsPath, follow the established pattern from the RoundedRectangle API addition.

5.1 .NET version guard — mandatory

All new public APIs in System.Drawing must be guarded with a preprocessor directive for the target .NET version. Currently, new APIs target at least .NET 11:

#if NET11_0_OR_GREATER
    /// <summary>
    ///  Draws the outline of the specified rounded rectangle.
    /// </summary>
    public void DrawRoundedRectangle(Pen pen, RectangleF rect, SizeF corner)
    {
        using GraphicsPath path = new();
        path.AddRoundedRectangle(rect, corner);
        DrawPath(pen, path);
    }
#endif

Why? The System.Drawing.Common package ships as part of the shared framework. Version guards ensure new APIs are only available on the .NET version they were approved for, preventing accidental use on older runtimes, specifically, when we need to service parts of main at a later point in time back into an earlier version, or if we're including for a new version, whose branch has not snapped, yet.

5.2 Provide both integer and float overloads

Every new drawing primitive must have two public overloads:

1. An integer overload (Rectangle, Point, Size) that delegates to the float overload.
2. A float overload (RectangleF, PointF, SizeF) with the actual implementation.

The integer overload uses <inheritdoc cref="..."/> to inherit documentation from the float overload:

#if NET11_0_OR_GREATER
    /// <inheritdoc cref="DrawRoundedRectangle(Pen, RectangleF, SizeF)"/>
    public void DrawRoundedRectangle(Pen pen, Rectangle rect, Size corner) =>
        DrawRoundedRectangle(pen, (RectangleF)rect, corner);

    /// <summary>
    ///  Draws the outline of the specified rounded rectangle.
    /// </summary>
    /// <param name="pen">The <see cref="Pen"/> to draw the outline with.</param>
    /// <param name="rect">The bounds of the rounded rectangle.</param>
    /// <param name="corner">
    ///  The size of the ellipse used to round the corners of the rectangle.
    /// </param>
    public void DrawRoundedRectangle(Pen pen, RectangleF rect, SizeF corner)
    {
        using GraphicsPath path = new();
        path.AddRoundedRectangle(rect, corner);
        DrawPath(pen, path);
    }
#endif

5.3 Provide Draw and Fill pairs

When adding a new shape primitive, provide both Draw (outline) and Fill (interior) methods. The Fill variant takes a Brush instead of a Pen:

#if NET11_0_OR_GREATER
    public void FillRoundedRectangle(Brush brush, RectangleF rect, SizeF corner)
    {
        using GraphicsPath path = new();
        path.AddRoundedRectangle(rect, corner);
        FillPath(brush, path);
    }
#endif

5.4 Add corresponding GraphicsPath method

If the new primitive is path-based, add the Add[Shape] method to GraphicsPath as well, using the same version guard and integer/float overload pattern:

#if NET11_0_OR_GREATER
    /// <inheritdoc cref="AddRoundedRectangle(RectangleF, SizeF)"/>
    public void AddRoundedRectangle(Rectangle rect, Size corner) =>
        AddRoundedRectangle((RectangleF)rect, corner);

    /// <summary>
    ///  Adds a rounded rectangle to this path.
    /// </summary>
    /// <param name="rect">The bounds of the rectangle to add.</param>
    /// <param name="corner">
    ///  The size of the ellipse used to round the corners of the rectangle.
    /// </param>
    public void AddRoundedRectangle(RectangleF rect, SizeF corner)
    {
        StartFigure();
        // … arc calls for each corner …
        CloseFigure();
    }
#endif

5.5 XML documentation

• The float overload carries the full <summary>, <param>, and optional <remarks> documentation.
• The integer overload uses <inheritdoc cref="FloatOverload"/> to avoid duplicating docs.
• Use <see cref="..."/> for cross-references to Pen, Brush, GraphicsPath, etc.

5.6 Placement in source files

Place new methods adjacent to existing related methods:

• DrawRoundedRectangle next to DrawRectangle.
• FillRoundedRectangle next to FillRectangle.
• AddRoundedRectangle next to AddRectangle / AddRectangles.

6. Complete Examples

Basic rendering with cached resources

private void PaintControl(PaintEventArgs e)
{
    var g = e.GraphicsInternal;

    using var borderPen = SystemColors.ActiveBorder.GetCachedPenScope();
    using var fillBrush = SystemColors.Control.GetCachedSolidBrushScope();

    g.FillRectangle(fillBrush, ClientRectangle);
    g.DrawRectangle(borderPen, 0, 0, Width - 1, Height - 1);
}

Complex rendering with state management

private void DrawComplexControl(PaintEventArgs e)
{
    GraphicsState? previousState = null;
    SmoothingMode originalMode = SmoothingMode.Default;

    try
    {
        var g = e.GraphicsInternal;
        previousState = g.Save();
        originalMode = g.SmoothingMode;

        g.SmoothingMode = SmoothingMode.AntiAlias;
        g.TranslateTransform(10, 10);

        using var pen = Color.Blue.GetCachedPenScope(2);
        using var brush = Color.LightBlue.GetCachedSolidBrushScope();

        using GraphicsPath path = new();
        path.AddEllipse(0, 0, 100, 50);
        g.FillPath(brush, path);
        g.DrawPath(pen, path);
    }
    finally
    {
        if (previousState is not null)
        {
            e.GraphicsInternal.Restore(previousState);
        }

        e.GraphicsInternal.SmoothingMode = originalMode;
    }
}

7. Checklist Before Submitting

• New APIs guarded with #if NET11_0_OR_GREATER (or the appropriate target version)
• Both integer and float overloads provided
• Draw and Fill pairs provided for shape primitives
• Corresponding GraphicsPath.Add[Shape] method added if path-based
• XML documentation on all new public members
• Integer overload uses <inheritdoc cref="..."/>
• Cached pens/brushes used where possible; disposed when not cacheable
• GraphicsPath objects created and disposed locally (never cached)
• Graphics state (smoothing, clip, transform) saved and restored
• New methods placed adjacent to related existing methods
• Tests written for both integer and float overloads (see gdi-rendering-tests skill)