Aawp

AAWP — AI Agent Wallet Protocol

The only crypto wallet protocol built exclusively for AI Agents. Not for humans.

AAWP enforces a single invariant: the signer is the AI Agent itself — locked in at wallet creation, immutable, verifiable on-chain. AI Agents manage their own on-chain assets across EVM networks through a guardian-based architecture. Transactions are signed locally via a sharded-key daemon — no human approval per tx, with full recovery and freeze capabilities for the human guardian.

Networks: Ethereum · Base · BNB Chain · Polygon · Optimism · Arbitrum

Architecture Overview

┌─────────────────────────────────────────────────┐
│  AI Agent (OpenClaw)                            │
│  ┌───────────────┐    ┌──────────────────────┐  │
│  │ wallet-manager│───▶│  Signing Daemon       │  │
│  │ dca / alerts  │    │  (Unix socket)        │  │
│  └───────────────┘    │  ┌──────────────────┐ │  │
│                       │  │ aawp-core.node   │ │  │
│                       │  │ (Rust N-API)     │ │  │
│                       │  └──────────────────┘ │  │
│                       └──────────┬───────────┘  │
│                                  │ sign          │
│  ┌───────────────┐               ▼              │
│  │ Guardian Key  │──▶ Pay gas ──▶ EVM Chain     │
│  │ (gas only)    │               │              │
│  └───────────────┘    ┌──────────▼───────────┐  │
│                       │ Smart Contract Wallet │  │
│                       │ (holds assets)        │  │
│                       └──────────────────────┘  │
└─────────────────────────────────────────────────┘

Key separation: Guardian pays gas → Wallet holds assets → Daemon signs transactions.

Quick Reference

All commands: node scripts/wallet-manager.js --help

Getting Started

1. Provision

First run is automatic — ensure-daemon.sh detects a missing seed and provisions.

bash scripts/provision.sh            # Initialize
bash scripts/provision.sh --reset    # Full reset (⚠️ destroys existing wallet)

2. Create Wallet

node scripts/wallet-manager.js --chain base create

If the Guardian needs gas, you'll see a funding guide with the Guardian address and private key.

3. Pin & Fund

export AAWP_WALLET=0x...            # Pin your wallet address
# Send a small amount of native token to the wallet address
node scripts/wallet-manager.js --chain base balance

4. Test

node scripts/wallet-manager.js --chain base quote ETH USDC 0.001
node scripts/wallet-manager.js --chain base swap ETH USDC 0.001

After fresh provisioning, verify the daemon binary hash is approved on the factory contract. If not, the factory owner must call approveBinary(hash).

Wallet Manager CLI

Entry point: node scripts/wallet-manager.js Chain flag: --chain <base|bsc|polygon|optimism|arbitrum|ethereum>

Wallet Lifecycle

wallet-manager.js --chain base status          # Status overview
wallet-manager.js --chain base balance         # Native + token balances
wallet-manager.js --chain base portfolio       # Full portfolio view
wallet-manager.js compute-address              # Predict wallet address
wallet-manager.js --chain base history         # Transaction history
wallet-manager.js --chain base upgrade-signer  # Rotate signer key
wallet-manager.js --chain base guardian-chains  # Guardian chain info

Transfers

wallet-manager.js --chain base send <recipient> <amount>
wallet-manager.js --chain base send-token <symbol> <recipient> <amount>

Trading

wallet-manager.js --chain base quote <from> <to> <amount>    # Preview (no gas)
wallet-manager.js --chain base swap <from> <to> <amount>     # Execute
wallet-manager.js --chain base bridge <token> <dest> <amount> # Cross-chain

Approvals

wallet-manager.js --chain base approve <token> <spender> <amount>
wallet-manager.js --chain base allowance <token> <spender>
wallet-manager.js --chain base revoke <token> <spender>

Contract Interaction

# Write (sends tx)
wallet-manager.js --chain base call <contract> "transfer(address,uint256)" 0xTo 1000

# Read (free)
wallet-manager.js --chain base read <contract> "balanceOf(address) returns (uint256)" 0xAddr

# Batch (atomic)
wallet-manager.js --chain base batch ./calls.json

Batch format:

[
  { "to": "0x...", "sig": "approve(address,uint256)", "args": ["0x...", "1000000"] },
  { "to": "0x...", "sig": "transfer(address,uint256)", "args": ["0x...", "500000"] }
]

Address Book

wallet-manager.js addr add <label> <address>
wallet-manager.js addr list
wallet-manager.js addr get <label>
wallet-manager.js addr remove <label>

RPC & Backup

wallet-manager.js get-rpc
wallet-manager.js --chain base set-rpc <url|default>
wallet-manager.js backup ./backup.tar.gz
wallet-manager.js restore ./backup.tar.gz

DCA Automation

Entry point: node scripts/dca.js

dca.js add --chain base --from ETH --to USDC --amount 0.01 --cron "0 9 * * *" --name "Daily ETH→USDC"
dca.js list
dca.js run <id>
dca.js history <id>
dca.js remove <id>

Registers an OpenClaw cron job that executes swaps on schedule.

Price Alerts

Entry point: node scripts/price-alert.js

# Notification only
price-alert.js add --chain base --from ETH --to USDC --above 2600 --notify

# Auto-swap on trigger
price-alert.js add --chain base --from ETH --to USDC --below 2200 --notify --auto-swap 0.01

price-alert.js list
price-alert.js check
price-alert.js remove <id>

Daemon Management

Run doctor.sh before sensitive operations or when signing seems off.

Cross-Chain Portfolio View

Entry point: node scripts/portfolio.js Supported chains: All 6 (base · eth · arb · op · polygon · bsc) — queried in parallel

Commands

portfolio.js                      # Full cross-chain summary with USD values
portfolio.js --chain base         # Single chain only
portfolio.js --no-prices          # Skip CoinGecko pricing (faster)
portfolio.js --hide-zero          # Hide zero-balance tokens
portfolio.js --json               # Raw JSON output (for automation)

Output Includes

• Native balance per chain (ETH / BNB / MATIC)
• All ERC-20 token balances via Multicall3 (1 RPC call per chain)
• USD value per token (CoinGecko public API)
• Total portfolio value across all chains
• Top 8 holdings ranked by USD value with % allocation
• Multi-chain holdings — same token aggregated across chains

Tokens tracked: USDC, USDT, WETH, DAI, WBTC, BNB/WBNB, MATIC, ARB, OP, CAKE, AERO, GMX, PEPE, and more per chain.

Limit Orders (CoW Protocol — Gasless)

Entry point: node scripts/limit-order.js Supported chains: eth · base · arb · op · polygon (CoW Protocol) · bsc (1inch Limit Orders)

Orders are signed off-chain (EIP-712) and settled by solvers — no gas on order creation (except BSC cancel which is on-chain).

Commands

limit-order.js --chain base create ETH USDC 0.1 2700      # Sell 0.1 ETH at ≥2700 USDC
limit-order.js --chain eth create USDC ETH 1000 0.00037   # Buy ETH with 1000 USDC
limit-order.js --chain base list                           # List open orders
limit-order.js --chain base history                        # All orders (filled/expired)
limit-order.js --chain base cancel <orderUid>              # Cancel open order
limit-order.js --chain base create ETH USDC 0.1 2700 --expiry 48   # 48h validity

Notes:

• First-time use requires one ERC-20 approval transaction (CoW VaultRelayer)
• price = amount of buyToken per 1 sellToken
• Orders persist in config/limit-orders.json for local tracking

NFT Operations (ERC-721 & ERC-1155)

Entry point: node scripts/nft.js Supported chains: All 6 chains (BSC via BscScan NFT API)

Commands

nft.js --chain base balance                          # List all NFTs (via Alchemy public API)
nft.js --chain eth balance --contract 0xBC4C...      # NFTs from specific collection
nft.js --chain eth info 0xBC4C... 1234               # Token metadata, owner, traits
nft.js --chain base transfer 0xNFT... 42 0xTo...     # ERC-721 transfer
nft.js --chain base transfer 0xNFT... 42 0xTo... 5   # ERC-1155 transfer (amount=5)
nft.js --chain base approve 0xNFT... 0xOperator...   # setApprovalForAll = true
nft.js --chain base revoke  0xNFT... 0xOperator...   # setApprovalForAll = false
nft.js --chain base mint 0xContract...               # Call mint() on contract
nft.js --chain base mint 0xContract... 0xcalldata    # Mint with custom calldata
nft.js --chain eth floor 0xBC4C...                   # Floor price from OpenSea

Notes:

• balance auto-detects ERC-721 vs ERC-1155 and fetches metadata
• info resolves IPFS URIs and displays traits
• floor queries OpenSea public API; Blur link provided for ETH collections

Yield / DeFi (Aave V3)

Entry point: node scripts/yield.js Supported chains: base · eth · arb · op · polygon (Aave V3) · bsc (Venus Protocol)

Commands

yield.js --chain base rates                    # Show supply/borrow APY for all tokens
yield.js --chain base positions                # Show active Aave positions & health factor
yield.js --chain base supply USDC 1000         # Supply 1000 USDC as collateral
yield.js --chain base withdraw USDC 500        # Withdraw 500 USDC
yield.js --chain base withdraw USDC max        # Full withdrawal
yield.js --chain base borrow USDC 200          # Borrow 200 USDC (variable rate, default)
yield.js --chain base borrow USDC 200 --rate stable   # Borrow at stable rate
yield.js --chain base repay USDC 200           # Repay partial debt
yield.js --chain base repay USDC max           # Full repayment

Supported Tokens by Chain

Safety note: Always check your health factor after borrowing. Health factor < 1.0 triggers liquidation. Use positions to monitor.

Token Launch (Clanker V4)

Deploy a token via your AAWP wallet as the on-chain deployer, admin, and LP fee recipient.

Script: scripts/deploy-clanker.js

Supported chains

Usage

# 1. Edit CONFIG at the top of the script
# 2. Preview (no broadcast)
node scripts/deploy-clanker.js --dry-run

# 3. Deploy
node scripts/deploy-clanker.js

CONFIG reference

const CONFIG = {
  chain:       'base',          // base | eth | arb | unichain | bera | bsc
  name:        'My Token',
  symbol:      'MTK',
  image:       'https://...',   // square image URL
  description: '...',
  website:     '',              // optional
  twitter:     '',              // optional

  initialMarketCap: 10,         // ETH (min ~10 ≈ $25K FDV)
  poolPositions:    'Standard', // Standard | Project | TwentyETH
  feeConfig:        'StaticBasic', // StaticBasic (1%) | DynamicBasic | Dynamic3
  devBuyEth:        0.003,      // ETH to buy at launch (0 to skip)

  vault: {
    enabled:     false,         // true = lock a portion of supply
    percentage:  20,            // % of supply (1–90)
    lockupDays:  7,             // cliff (min 7 days)
    vestingDays: 180,           // linear unlock after cliff
  },

  tokenAdmin:      null,        // null = AAWP wallet
  rewardRecipient: null,        // null = AAWP wallet (receives LP fees)
};

How it works: the AAWP wallet calls Clanker.deployToken() directly (gas limit 8M). tokenAdmin and all LP fee rewards default to the AAWP wallet — the AI Agent owns its token end-to-end.

Deployment Reference

AAWP contracts share identical addresses across all chains via CREATE2 vanity deployment:

Verified on: Etherscan · BaseScan · BscScan · PolygonScan · Optimistic Etherscan · Arbiscan

Security

Troubleshooting

File Structure

aawp/
├── SKILL.md                    # This document
├── WALLET_SETUP.md             # First-time setup guide
├── config/
│   ├── chains.json             # Network RPC & contract addresses
│   └── guardian.json           # Guardian wallet (auto-generated, gitignored)
├── scripts/
│   ├── wallet-manager.js       # Primary CLI
│   ├── dca.js                  # DCA automation
│   ├── price-alert.js          # Price alert system
│   ├── provision.sh            # Initial provisioning
│   ├── doctor.sh               # Diagnostics
│   ├── ensure-daemon.sh        # Daemon lifecycle
│   └── restart-daemon.sh       # Force restart
├── core/
│   ├── aawp-core.node          # Native signing addon (linux-x64)
│   ├── aawp-core.node.hash     # Binary integrity hash
│   ├── loader.js               # Addon loader
│   └── index.d.ts              # TypeScript declarations
└── daemon/                     # Daemon implementation