Glkvm

GLKVM Control Skill

Initialization

The following steps must be performed at the start of each session:

Step 1: Get Connection Information

Ask the user for the following information (if not already provided):

1. GLKVM IP address (e.g., 192.168.1.100)
2. Login password (username is fixed as admin)

Step 2: Login to Obtain Token

curl -sk -c /tmp/glkvm_cookies.txt \
  -F "user=admin" \
  -F "passwd=<PASSWORD>" \
  "https://<IP>/api/auth/login"

• Response ok: true with a token indicates successful login; the auth_token is also saved in the cookie.
• Response with two_step_required: true means waiting for two-step approval.
• All subsequent requests must include -b /tmp/glkvm_cookies.txt.

All requests use HTTPS with -k (ignore certificate errors).

Feature 1: Screenshot / View Current Screen

Capture and save a screenshot:

curl -sk -b /tmp/glkvm_cookies.txt \
  "https://<IP>/api/streamer/snapshot" \
  --output /tmp/glkvm_snapshot.jpg

Then use the Read tool to read /tmp/glkvm_snapshot.jpg to view the image content.

Get thumbnail (recommended for quick preview):

curl -sk -b /tmp/glkvm_cookies.txt \
  "https://<IP>/api/streamer/snapshot?preview=true&preview_max_width=1280&preview_max_height=720&preview_quality=80" \
  --output /tmp/glkvm_snapshot.jpg

Screenshot with OCR recognition (returns text):

curl -sk -b /tmp/glkvm_cookies.txt \
  "https://<IP>/api/streamer/snapshot?ocr=true&ocr_langs=chi_sim,eng"

Parameter description:

• save=true: Save screenshot to device disk
• load=true: Load previously saved screenshot without re-capturing
• allow_offline=true: Allow response even when video stream is offline
• ocr_left/ocr_top/ocr_right/ocr_bottom: OCR region coordinates (-1 = no crop)

Working principle: After taking a screenshot, you must use the Read tool to view the image, understand the current screen state, then decide the next action.

Feature 2: Keyboard Control

2a. Send Single Key

# Full click (press + release)
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_key?key=KEY_A"

# Press only
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_key?key=KEY_A&state=true"

# Release only
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_key?key=KEY_A&state=false"

Common key names (USB HID keycodes):

• Letters: KEY_A ~ KEY_Z
• Numbers: KEY_1 ~ KEY_0
• Function keys: KEY_F1 ~ KEY_F12
• Special keys: KEY_ENTER, KEY_BACKSPACE, KEY_TAB, KEY_ESC, KEY_SPACE
• Arrow keys: KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT
• Modifier keys: KEY_LEFTCTRL, KEY_LEFTSHIFT, KEY_LEFTALT, KEY_LEFTMETA
• Others: KEY_DELETE, KEY_HOME, KEY_END, KEY_PAGEUP, KEY_PAGEDOWN, KEY_INSERT

2b. Send Keyboard Shortcuts

# Ctrl+C
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_shortcut?keys=ControlLeft,KeyC"

# Ctrl+Alt+Delete
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_shortcut?keys=ControlLeft,AltLeft,Delete"

# Win+L (lock screen)
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_shortcut?keys=MetaLeft,KeyL"

# Alt+F4
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_shortcut?keys=AltLeft,F4"

The keys parameter is comma-separated, following the Web KeyboardEvent.code specification: ControlLeft, ShiftLeft, AltLeft, MetaLeft, KeyAKeyZ, Digit0Digit9, F1~`F12, Enter, Escape, Backspace, Tab, Space, Delete`, etc.

2c. Type Text String

curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  -H "Content-Type: text/plain" \
  --data-raw "Hello, World!" \
  "https://<IP>/api/hid/print"

# Slow mode (better compatibility)
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  -H "Content-Type: text/plain" \
  --data-raw "Hello" \
  "https://<IP>/api/hid/print?slow=true"

Query parameters:

• limit (int, default 1024): Maximum characters to send, 0 = unlimited
• keymap: Key mapping name
• slow (bool): Slow mode, adds delay per key

Note: Only characters present in the keymap are supported; special characters such as Chinese cannot be typed directly.

2d. Reset HID (Release All Keys)

curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/reset"

Call this when keys are stuck or the state is abnormal.

2e. Check HID Status

curl -sk -b /tmp/glkvm_cookies.txt \
  "https://<IP>/api/hid"

Returns keyboard/mouse online status, LED indicators (CapsLock/NumLock/ScrollLock), and mouse positioning mode (absolute/relative).

Feature 3: Mouse Control

3a. Mouse Button Click

# Left click
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_mouse_button?button=left"

# Right click
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_mouse_button?button=right"

# Middle click
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_mouse_button?button=middle"

# Left button press (hold, for dragging)
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_mouse_button?button=left&state=true"

# Left button release
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_mouse_button?button=left&state=false"

3b. Absolute Mouse Move (for absolute positioning mode)

Coordinate system: (0,0) = screen center; (-32768,-32768) = top-left; (32767,32767) = bottom-right

# Move to screen center
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_mouse_move?to_x=0&to_y=0"

# Move to top-left corner
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_mouse_move?to_x=-32768&to_y=-32768"

Pixel coordinate conversion (screen resolution W x H, target pixel px, py):

to_x = round(px / W * 65535 - 32768)
to_y = round(py / H * 65535 - 32768)

3c. Relative Mouse Move

# Move right 50, down 30
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_mouse_relative?delta_x=50&delta_y=30"

Range -127 ~ 127; call multiple times for larger movements.

3d. Mouse Scroll Wheel

# Scroll up
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_mouse_wheel?delta_x=0&delta_y=3"

# Scroll down
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/hid/events/send_mouse_wheel?delta_x=0&delta_y=-3"

delta_y positive = scroll up, negative = scroll down; range -127 ~ 127.

Feature 4: Fingerbot Physical Button Robot

Fingerbot controls a physical press robot via Bluetooth to simulate pressing physical buttons (power button, reset button, etc.).

4a. Check Connection

curl -sk -b /tmp/glkvm_cookies.txt \
  "https://<IP>/api/fingerbot/exist"

Returns result.exist: true if the Bluetooth adapter is connected.

4b. Check Battery

curl -sk -b /tmp/glkvm_cookies.txt \
  "https://<IP>/api/fingerbot/battery"

Returns result.battery: battery percentage from 0 to 100.

4c. Perform Press Click

# Short press (100ms, high angle, suitable for normal buttons)
curl -sk -b /tmp/glkvm_cookies.txt \
  "https://<IP>/api/fingerbot/click?press_time=100&angle_enum=2"

# Short press power button to power on (500ms)
curl -sk -b /tmp/glkvm_cookies.txt \
  "https://<IP>/api/fingerbot/click?press_time=500&angle_enum=2"

# Long press power button to force shutdown (5 seconds)
curl -sk -b /tmp/glkvm_cookies.txt \
  "https://<IP>/api/fingerbot/click?press_time=5000&angle_enum=2"

# Press reset button (200ms)
curl -sk -b /tmp/glkvm_cookies.txt \
  "https://<IP>/api/fingerbot/click?press_time=200&angle_enum=2"

Parameter description:

• press_time: Press duration (milliseconds), range 100~60000
• angle_enum: 1 = low angle (light press), 2 = high angle (deep press)

4d. Check Firmware Version

curl -sk -b /tmp/glkvm_cookies.txt \
  "https://<IP>/api/fingerbot/local_version"

Feature 5: ATX Power Management

ATX power control is achieved through Fingerbot physical pressing (no separate ATX interface in the API).

Before use, confirm that Fingerbot is connected and installed near the host's power/reset button:

curl -sk -b /tmp/glkvm_cookies.txt "https://<IP>/api/fingerbot/exist"
curl -sk -b /tmp/glkvm_cookies.txt "https://<IP>/api/fingerbot/battery"

Feature 6: System Control

Reboot GLKVM Device Itself

curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/upgrade/reboot"

Note: This reboots the GLKVM device, not the controlled host.

Feature 7: Firmware Upgrade

7a. Get Local Firmware Version

curl -sk -b /tmp/glkvm_cookies.txt \
  "https://<IP>/api/upgrade/version"

Response fields:

• result.version: Local firmware version string
• result.model: Device model (e.g., RM1)

7b. Compare with Server Version

curl -sk -b /tmp/glkvm_cookies.txt \
  "https://<IP>/api/upgrade/compare"

Response fields:

• result.local_version / result.local_model: Current firmware version and model
• result.server_version / result.server_model: Latest version available on the update server
• result.release_note: English release notes
• result.release_note_cn: Chinese release notes

7c. Download Firmware from Cloud (OTA)

Trigger cloud download (returns immediately, downloads in background):

curl -sk -b /tmp/glkvm_cookies.txt \
  "https://<IP>/api/upgrade/download"

Response: result.size = total firmware size in bytes.

Check download progress:

curl -sk -b /tmp/glkvm_cookies.txt \
  "https://<IP>/api/upgrade/download_info"

Response: result.size = bytes downloaded so far, result.total_size = total size.

Cancel an in-progress download:

curl -sk -b /tmp/glkvm_cookies.txt \
  "https://<IP>/api/upgrade/download_cancel"

7d. Upload Firmware File Manually

curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  -F "file=@/path/to/update.img" \
  "https://<IP>/api/upgrade/upload"

• Request body: multipart/form-data, field name file
• Requires Content-Length header (curl sets it automatically)
• Firmware is saved to /userdata/update.img on the device
• Response: result.filename (original filename) and result.size (bytes)

7e. Start Firmware Upgrade

# Upgrade and preserve existing config (default)
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/upgrade/start?save_config=true"

# Upgrade and reset to factory defaults
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/upgrade/start?save_config=false"

• Must upload or download firmware first (step 7c or 7d)
• Device reboots automatically after upgrade completes
• Response: result.status ("Upgrade started" or "Upgrade failed"), result.stdout, result.stderr

Typical OTA upgrade workflow:

1. /api/upgrade/compare     → check if update available
2. /api/upgrade/download    → start background download
3. /api/upgrade/download_info (poll) → wait until size == total_size
4. /api/upgrade/start       → apply upgrade (device reboots)

Feature 8: MSD Remote ISO Download

Download an ISO image from a remote URL directly to the MSD storage, without transferring through the client machine.

8a. Remote Download to MSD

curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/msd/write_remote?url=http://example.com/ubuntu.iso"

# Specify target filename
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/msd/write_remote?url=http://example.com/ubuntu.iso&image=ubuntu.iso"

# Skip TLS verification for HTTPS URLs
curl -sk -b /tmp/glkvm_cookies.txt -X POST \
  "https://<IP>/api/msd/write_remote?url=https://example.com/ubuntu.iso&insecure=1"

Query parameters:

• url (required): Remote file download URL
• image (optional): Target image name on MSD storage; auto-inferred from URL if omitted
• prefix (optional): Subdirectory path prefix
• insecure (optional): Skip TLS certificate verification, default false
• timeout (optional): Connection timeout in seconds, default 10.0
• remove_incomplete (optional): If 1, deletes partial file on write failure

Response: Streaming NDJSON (Content-Type: application/x-ndjson)

Each line is a JSON object reporting progress; the last line is the final result:

{"image": {"name": "ubuntu.iso", "size": 1234567890, "written": 102400000}}

Fields:

• image.name: Image filename
• image.size: Total file size in bytes (0 if server did not return Content-Length)
• image.written: Bytes written so far

Error responses:

• 400: Remote URL unreachable or request failed
• 507: Insufficient storage space on MSD partition

Typical workflow for remote ISO installation:

1. /api/msd/partition_disconnect          → ensure drive is disconnected
2. /api/msd/write_remote?url=<ISO_URL>    → download ISO directly from internet
3. (Poll NDJSON stream until size == written)
4. /api/msd/partition_connect             → present drive to target host
5. (On target host) boot from USB drive, complete installation
6. /api/msd/partition_disconnect          → disconnect when done

Standard Operation Workflows

Click a Specific Position on Screen

1. Take screenshot -> View with Read tool -> Analyze target element pixel coordinates (px, py)
2. Confirm screen resolution W x H (inferred from screenshot image size)
3. Convert to HID coordinates:
   to_x = round(px / W * 65535 - 32768)
   to_y = round(py / H * 65535 - 32768)
4. send_mouse_move to move
5. send_mouse_button?button=left to click
6. Take screenshot to verify

Type Text

1. Take screenshot to confirm focus is in the correct input field
2. /api/hid/print to send text
3. Take screenshot to confirm input is correct

General Automation Workflow

Initialize login -> Take screenshot to observe -> Perform action -> Take screenshot to verify -> Loop until complete

Error Handling