Maxxit Lazy Trading

Maxxit Lazy Trading

Execute perpetual futures trades on Ostium, Aster DEX, and Avantis DEX through Maxxit's Lazy Trading API. This skill enables automated trading through programmatic endpoints for opening/closing positions and managing risk.

Built-in Strategy Scripts

The skill includes standalone Python strategy scripts. Use them when the user wants the agent to run a predefined trading system instead of manually specifying each trade.

• ema-strategy.py
  • Trend-following EMA crossover on Binance klines using close prices.
• rsi-bollinger-strategy.py
  • Mean-reversion system that waits for price to pierce a Bollinger Band and re-enter with RSI confirmation.
• donchian-adx-strategy.py
  • Breakout system that trades Donchian channel breaks only when ADX confirms a strong trend regime.
• taker-strategy.py - Aggressive Taker (Order Flow) HFT strategy. Analyzes Binance taker buy/sell ratios to detect aggressive market participants and catch rapid momentum shifts.
• mean-reversion-strategy.py - RSI + Bollinger Band mean-reversion strategy. A technical approach using price exhaustion points optimized for high-frequency scalping in sideways or boring markets.
• breakout-strategy.py - Volatility breakout strategy with ATR filter. Enters trades when price breaks out of a standard deviation channel while ATR confirms increasing volatility and momentum.
• vwap-strategy.py - VWAP crossover institutional momentum strategy. Uses volume-weighted average price and EMA to confirm institutional trend alignment and confirm trade strength with volume.

All scripts:

• read Binance kline data directly from https://api.binance.com/api/v3/klines
• use MAXXIT_API_URL and MAXXIT_API_KEY
• execute through Maxxit programmatic trading endpoints
• maintain per-symbol, per-venue state in the OpenClaw workspace

Example invocations:

python3 ema-strategy.py --symbol BTCUSDT --interval 5m --venue avantis
python3 rsi-bollinger-strategy.py --symbol ETHUSDT --interval 5m --venue ostium
python3 donchian-adx-strategy.py --symbol BTCUSDT --interval 15m --venue avantis

When to Use This Skill

• User wants to execute trades on Ostium
• User wants to execute trades on Aster DEX
• User asks about their lazy trading account details
• User wants to check their USDC/ETH balance
• User wants to view their open positions or portfolio
• User wants to see their closed position history or PnL
• User wants to discover available trading symbols
• User wants to get market data or LunarCrush metrics for analysis
• User wants market research, a market summary, or a trade-focused research brief
• User wants a whole market snapshot for the trading purpose
• User wants to compare altcoin rankings (AltRank) across different tokens
• User wants to identify high-sentiment trading opportunities
• User wants to know social volume trends for crypto assets
• User wants to open a new trading position (long/short)
• User wants to close an existing position
• User wants to set or modify take profit levels
• User wants to set or modify stop loss levels
• User wants to fetch current token/market prices
• User mentions "lazy trade", "perps", "perpetuals", or "futures trading"
• User wants to automate their trading workflow
• User wants to copy-trade or mirror another trader's positions
• User wants to discover other OpenClaw agents to learn from
• User wants to see what trades top-performing traders are making
• User wants to find high-impact-factor traders to replicate
• User wants to sell their trading signals as alpha
• User wants to browse or buy trustless alpha from ZK-verified traders
• User wants to generate a ZK proof of their trading performance or flag a position as alpha
• User mentions "alpha marketplace", "sell alpha", "buy alpha", or "ZK proof"

⚠️ DEX Routing Rules (Mandatory)

1. Always ask venue first if unclear: "Do you want to trade on Ostium, Aster, or Avantis?"
2. Always state the active venue explicitly in your response (e.g., "Using Ostium..." or "Using Aster..." or "Using Avantis...").
3. Do not mix venue suggestions:
   • If user is trading on Ostium, only suggest Ostium endpoints/actions.
   • If user is trading on Aster, only suggest Aster endpoints/actions.
   • If user is trading on Avantis, only suggest Avantis endpoints/actions.
4. Do not ask network clarification:
   • Ostium is mainnet-only in this setup.
   • Aster is testnet-only in this setup.
   • Avantis is mainnet-only (Base chain) in this setup.
   • Therefore do not ask "mainnet or testnet?" for any venue.
5. If user switches venue mid-conversation, confirm the switch and then continue with only that venue's flow.

⚠️ CRITICAL: API Parameter Rules (Read Before Calling ANY Endpoint)

NEVER assume, guess, or hallucinate values for API request parameters. Every required parameter must come from either a prior API response or explicit user input. If you don't have a required value, you MUST fetch it from the appropriate dependency endpoint first.

Parameter Dependency Graph

The following shows where each required parameter comes from. Always resolve dependencies before calling an endpoint.

Mandatory Workflow Rules

1. Always call /club-details first to get user_wallet (used as userAddress/address) and ostium_agent_address (used as agentAddress). Cache these for the session — they don't change.
2. Never hardcode or guess wallet addresses. They are unique per user and must come from /club-details.
3. For opening a position: Fetch market data first (via /lunarcrush or /market-data), present it to the user, get explicit confirmation plus trade parameters (collateral, leverage, side, TP, SL), then execute.
   • Market format rule (Ostium): /symbols returns pairs like ETH/USD, but /open-position expects market as base token only (e.g. ETH). Convert by taking the base token before /.
4. For setting TP/SL after opening: Use the actualTradeIndex from the /open-position response. If you don't have it (e.g., position was opened earlier), call /positions to get tradeIndex, pairIndex, and entryPrice.
5. For closing a position: You need the tradeIndex — always call /positions first to look up the correct one for the user's specified market/position.
6. Ask the user for trade parameters — never assume collateral amount, leverage, TP%, or SL%. Present defaults but let the user confirm or override.
7. Validate the market exists by calling /symbols before trading if you're unsure whether a token is available on Ostium.
8. For Alpha consumer flow: Follow the exact order: /alpha/agents → /alpha/listings → /alpha/purchase (402) → /alpha/pay → /alpha/purchase (with X-Payment) → /alpha/verify → /club-details → /alpha/execute. Never skip steps. For /alpha/verify, pass the content object exactly as received from purchase — do not modify keys or values.

Pre-Flight Checklist (Run Mentally Before Every API Call)

✅ Do I have the user's wallet address? → If not, call /club-details
✅ Do I have the agent address? → If not, call /club-details
✅ Does this endpoint need a tradeIndex? → If not in hand, call /positions
✅ Does this endpoint need entryPrice/pairIndex? → If not in hand, call /positions
✅ Did I ask the user for all trade parameters? → collateral, leverage, side, TP%, SL%
✅ Is the market/symbol valid? → If unsure, call /symbols to verify
✅ (Alpha) Do I have commitment? → If not, call /alpha/agents
✅ (Alpha) Do I have listingId? → If not, call /alpha/listings
✅ (Alpha) For /verify: Am I passing content exactly as received? → No modifications
✅ (Alpha) For /execute: Do I have agentAddress + userAddress? → Call /club-details

Authentication

All requests require an API key with prefix lt_. Pass it via:

• Header: X-API-KEY: lt_your_api_key
• Or: Authorization: Bearer lt_your_api_key

Market Research Workflow

When the user asks for market research, use the Maxxit market research endpoint instead of writing the research from scratch.

Endpoint:

• POST /api/lazy-trading/research

Rules:

• Construct the content prompt from the user's ask.
• Preserve the user's asset, timeframe, strategy, and risk focus.
• If the user is vague, build a best-effort trading research query from the context they gave instead of inventing a different objective.
• Prefer prompts that ask for market structure, trend, momentum, support/resistance, catalysts, and trading risks when relevant.
• Set deepResearch to true when the user asks for deep research, a comprehensive comparison, a detailed diligence-style breakdown, or explicitly wants more thorough research.
• Set deepResearch to false for standard market summaries, quick trade briefs, or normal tactical research requests.
• Summarize the response and format it for readability.

Prompt construction examples:

• User: "Research BTC for a swing long."
  • Query: Analyze BTC for a swing-long setup. Cover market structure, momentum, key support/resistance, likely catalysts, invalidation levels, and major trading risks.
• User: "Give me market research on ETH for today."
  • Query: Summarize ETH market structure for today, including trend, momentum, key support/resistance, important catalysts, and trading risks for intraday positioning.
• User: "Research SOL before I short it."
  • Query: Analyze SOL for a potential short setup. Cover current market structure, weakness signals, resistance levels, downside levels to watch, catalysts, and key squeeze/invalidation risks.

Example call:

curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/research" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}" \
  -H 'Content-Type: application/json' \
  -d '{
    "content": "Analyze BTC for a swing-long setup. Cover market structure, momentum, key support/resistance, likely catalysts, invalidation levels, and major trading risks.",
    "deepResearch": false
  }'

API Endpoints

Ostium Programmatic Endpoints (/api/lazy-trading/programmatic/*)

All endpoints under /api/lazy-trading/programmatic/* are for Ostium unless explicitly prefixed with /aster/.

Get Account Details

Retrieve lazy trading account information including agent status, Telegram connection, and trading preferences.

curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/club-details" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}"

Response:

{
  "success": true,
  "user_wallet": "0x...",
  "agent": {
    "id": "agent-uuid",
    "name": "Lazy Trader - Username",
    "venue": "ostium",
    "status": "active"
  },
  "telegram_user": {
    "id": 123,
    "telegram_user_id": "123456789",
    "telegram_username": "trader"
  },
  "deployment": {
    "id": "deployment-uuid",
    "status": "active",
    "enabled_venues": ["ostium"]
  },
  "trading_preferences": {
    "risk_tolerance": "medium",
    "trade_frequency": "moderate"
  },
  "ostium_agent_address": "0x...",
  "aster_configured": "true",
}

Get Available Symbols

Retrieve all available trading symbols from the Ostium exchange. Use this to discover which symbols you can trade and get LunarCrush data for.

curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/symbols" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}"

Response:

{
  "success": true,
  "symbols": [
    {
      "id": 0,
      "symbol": "BTC/USD",
      "group": "crypto",
      "maxLeverage": 150
    },
    {
      "id": 1,
      "symbol": "ETH/USD",
      "group": "crypto",
      "maxLeverage": 100
    }
  ],
  "groupedSymbols": {
    "crypto": [
      { "id": 0, "symbol": "BTC/USD", "group": "crypto", "maxLeverage": 150 },
      { "id": 1, "symbol": "ETH/USD", "group": "crypto", "maxLeverage": 100 }
    ],
    "forex": [...]
  },
  "count": 45
}

Get LunarCrush Market Data

Retrieve cached LunarCrush market metrics for a specific symbol. This data includes social sentiment, price changes, volatility, and market rankings.

⚠️ Dependency: You must call the /symbols endpoint first to get the exact symbol string (e.g., "BTC/USD"). The symbol parameter requires an exact match.

# First, get available symbols
SYMBOL=$(curl -s -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/symbols" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}" | jq -r '.symbols[0].symbol')

# Then, get LunarCrush data for that symbol
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/lunarcrush?symbol=${SYMBOL}" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}"

Response:

{
  "success": true,
  "symbol": "BTC/USD",
  "lunarcrush": {
    "galaxy_score": 72.5,
    "alt_rank": 1,
    "social_volume_24h": 15234,
    "sentiment": 68.3,
    "percent_change_24h": 2.45,
    "volatility": 0.032,
    "price": "95000.12345678",
    "volume_24h": "45000000000.00000000",
    "market_cap": "1850000000000.00000000",
    "market_cap_rank": 1,
    "social_dominance": 45.2,
    "market_dominance": 52.1,
    "interactions_24h": 890000,
    "galaxy_score_previous": 70.1,
    "alt_rank_previous": 1
  },
  "updated_at": "2026-02-14T08:30:00.000Z"
}

LunarCrush Field Descriptions:

Data Freshness:

• LunarCrush data is cached and updated periodically by a background worker
• Check the updated_at field to see when the data was last refreshed
• Data is typically refreshed every few hours

Get Account Balance

Retrieve USDC and ETH balance for the user's Ostium wallet address.

⚠️ Dependency: The address field is the user's Ostium wallet address (user_wallet). You MUST fetch it from /club-details first — do NOT hardcode or assume any address.

curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/balance" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}" \
  -H "Content-Type: application/json" \
  -d "{"address": "0x..."}"

Response:

{
  "success": true,
  "address": "0x...",
  "usdcBalance": "1000.50",
  "ethBalance": "0.045"
}

Get Portfolio Positions

Get all open positions for the user's Ostium trading account. This endpoint is critical — it returns tradeIndex, pairIndex, and entryPrice which are required for closing positions and setting TP/SL.

⚠️ Dependency: The address field must come from /club-details → user_wallet. NEVER guess it.

🔑 This endpoint provides values needed by: /close-position (needs tradeIndex), /set-take-profit (needs tradeIndex, pairIndex, entryPrice), /set-stop-loss (needs tradeIndex, pairIndex, entryPrice).

curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/positions" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}" \
  -H "Content-Type: application/json" \
  -d "{"address": "0x..."}"

Request Body:

{
  "address": "0x..."  // REQUIRED — from /club-details → user_wallet. NEVER guess this.
}

Response:

{
  "success": true,
  "positions": [
    {
      "market": "BTC",
      "marketFull": "BTC/USD",
      "side": "long",
      "collateral": 100.0,
      "entryPrice": 95000.0,
      "leverage": 10.0,
      "tradeId": "12345",
      "tradeIndex": 2,
      "pairIndex": "0",
      "notionalUsd": 1000.0,
      "totalFees": 2.50,
      "stopLossPrice": 85500.0,
      "takeProfitPrice": 0.0
    }
  ],
  "totalPositions": 1
}

Key fields to extract from each position:

• tradeIndex — needed for /close-position, /set-take-profit, /set-stop-loss
• pairIndex — needed for /set-take-profit, /set-stop-loss
• entryPrice — needed for /set-take-profit, /set-stop-loss
• side — needed for /set-take-profit, /set-stop-loss

### Get Position History

Get trading history for a wallet.  
- `venue: "OSTIUM"` (default): uses Ostium history.
- `venue: "AVANTIS"`: returns normalized closed-trade history from Avantis `v2/history/portfolio/history`.

**Note:** The user's Ostium wallet address can be fetched from the `/api/lazy-trading/programmatic/club-details` endpoint (see Get Account Balance section above).

```bash
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/history" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}" \
  -H "Content-Type: application/json" \
  -d '{"venue":"OSTIUM","address":"0x...","count":50}'

Request Body:

{
  "venue": "OSTIUM",    // Optional: "OSTIUM" (default) or "AVANTIS"
  "address": "0x...",   // Required for OSTIUM; also accepted for AVANTIS as alias of userAddress
  "count": 50           // Number of recent orders to retrieve (default: 50)
}

Response:

{
  "success": true,
  "history": [
    {
      "market": "ETH",
      "side": "long",
      "collateral": 50.0,
      "leverage": 5,
      "price": 3200.0,
      "pnlUsdc": 15.50,
      "profitPercent": 31.0,
      "totalProfitPercent": 31.0,
      "rolloverFee": 0.05,
      "fundingFee": 0.10,
      "executedAt": "2025-02-10T15:30:00Z",
      "tradeId": "trade_123"
    }
  ],
  "count": 25,
  "venue": "OSTIUM"
}

Avantis history example (same /history endpoint):

curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/history" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}" \
  -H "Content-Type: application/json" \
  -d '{"venue":"AVANTIS","userAddress":"0x...","count":50}'

Returns normalized records like: id, tradeId (<pairIndex>:<tradeIndex>), market, side, collateralUsdc, positionSizeUsdc, leverage, entryPrice, closePrice, usdcSentToTrader, grossPnlUsdc, closedAt, timestamp.

Open Position

Open a new perpetual futures position on Ostium.

⚠️ Dependencies — ALL must be resolved BEFORE calling this endpoint:

1. agentAddress → from /club-details → ostium_agent_address (NEVER guess)
2. userAddress → from /club-details → user_wallet (NEVER guess)
3. market → validate via /symbols endpoint if unsure the token exists
   • If /symbols returns ETH/USD, pass market: "ETH" to /open-position (not ETH/USD)
4. side, collateral, leverage → ASK the user explicitly, do not assume

📊 Recommended Pre-Trade Flow:

1. Call /lunarcrush?symbol=TOKEN/USD or /market-data to get market conditions
2. Present the market data to the user (price, sentiment, volatility)
3. Ask the user: "Do you want to proceed? Specify: collateral (USDC), leverage, long/short"
4. Only after user confirms → call /open-position

🔐 Verification Note: Every trade is analyzed by EigenAI for alignment with market conditions. Users can verify the cryptographic signatures and reasoning for all their trades at maxxit.ai/openclaw.

🔑 SAVE the response — actualTradeIndex and entryPrice are needed for setting TP/SL later.

curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/open-position" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}" \
  -H "Content-Type: application/json" \
  -d '{
    "agentAddress": "0x...",
    "userAddress": "0x...",
    "market": "BTC",
    "side": "long",
    "collateral": 100,
    "leverage": 10
  }'

Request Body:

{
  "agentAddress": "0x...",      // REQUIRED — from /club-details → ostium_agent_address. NEVER guess.
  "userAddress": "0x...",       // REQUIRED — from /club-details → user_wallet. NEVER guess.
  "market": "BTC",              // REQUIRED — Base token only for Ostium (e.g. "ETH", not "ETH/USD"). Validate via /symbols if unsure.
  "side": "long",               // REQUIRED — "long" or "short". ASK the user.
  "collateral": 100,            // REQUIRED — Collateral in USDC. ASK the user.
  "leverage": 10,               // Optional (default: 10). ASK the user.
  "deploymentId": "uuid...",    // Optional — associated deployment ID
  "signalId": "uuid...",        // Optional — associated signal ID
  "isTestnet": false            // Optional (default: false)
}

Response (IMPORTANT — save these values):

{
  "success": true,
  "orderId": "order_123",
  "tradeId": "trade_abc",
  "transactionHash": "0x...",
  "txHash": "0x...",
  "status": "OPEN",
  "message": "Position opened successfully",
  "actualTradeIndex": 2,       // ← SAVE THIS — needed for /set-take-profit and /set-stop-loss
  "entryPrice": 95000.0,        // ← SAVE THIS — needed for /set-take-profit and /set-stop-loss
  "reasoning": "Market sentiment is bullish...", // EigenAI trade alignment analysis
  "llmSignature": "0x..."       // Cryptographic signature for auditability
}

Close Position

Close an existing perpetual futures position on Ostium.

⚠️ Dependencies — resolve BEFORE calling this endpoint:

1. agentAddress → from /club-details → ostium_agent_address
2. userAddress → from /club-details → user_wallet
3. tradeIndex → call /positions first to find the position you want to close, then use its tradeIndex

NEVER guess the tradeIndex or tradeId. Always fetch from /positions endpoint.

curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/close-position" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}" \
  -H "Content-Type: application/json" \
  -d '{
    "agentAddress": "0x...",
    "userAddress": "0x...",
    "market": "BTC",
    "tradeId": "12345"
  }'

Request Body:

{
  "agentAddress": "0x...",      // REQUIRED — from /club-details → ostium_agent_address. NEVER guess.
  "userAddress": "0x...",       // REQUIRED — from /club-details → user_wallet. NEVER guess.
  "market": "BTC",              // REQUIRED — Token symbol
  "tradeId": "12345",           // Optional — from /positions → tradeId
  "actualTradeIndex": 2,         // Highly recommended — from /positions → tradeIndex. NEVER guess.
  "isTestnet": false            // Optional (default: false)
}

Response:

{
  "success": true,
  "result": {
    "txHash": "0x...",
    "market": "BTC",
    "closePnl": 25.50
  },
  "closePnl": 25.50,
  "message": "Position closed successfully",
  "alreadyClosed": false
}

Set Take Profit

Set or update take-profit level for an existing position on Ostium.

⚠️ Dependencies — you need ALL of these before calling:

1. agentAddress → from /club-details → ostium_agent_address
2. userAddress → from /club-details → user_wallet
3. tradeIndex → from /open-position response → actualTradeIndex, OR from /positions → tradeIndex
4. entryPrice → from /open-position response → entryPrice, OR from /positions → entryPrice
5. pairIndex → from /positions → pairIndex, OR from /symbols → symbol id
6. takeProfitPercent → ASK the user (default: 0.30 = 30%)
7. side → from /positions → side ("long" or "short")

If you just opened a position: Use actualTradeIndex and entryPrice from the /open-position response. If the position was opened earlier: Call /positions to fetch tradeIndex, entryPrice, pairIndex, and side.

curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/set-take-profit" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}" \
  -H "Content-Type: application/json" \
  -d '{
    "agentAddress": "0x...",
    "userAddress": "0x...",
    "market": "BTC",
    "tradeIndex": 2,
    "takeProfitPercent": 0.30,
    "entryPrice": 90000,
    "pairIndex": 0
  }'

Request Body:

{
  "agentAddress": "0x...",        // REQUIRED — from /club-details. NEVER guess.
  "userAddress": "0x...",         // REQUIRED — from /club-details. NEVER guess.
  "market": "BTC",                // REQUIRED — Token symbol
  "tradeIndex": 2,                // REQUIRED — from /open-position or /positions. NEVER guess.
  "takeProfitPercent": 0.30,       // Optional (default: 0.30 = 30%). ASK the user.
  "entryPrice": 90000,             // REQUIRED — from /open-position or /positions. NEVER guess.
  "pairIndex": 0,                  // REQUIRED — from /positions or /symbols. NEVER guess.
  "side": "long",                  // Optional (default: "long") — from /positions.
  "isTestnet": false              // Optional (default: false)
}

Response:

{
  "success": true,
  "message": "Take profit set successfully",
  "tpPrice": 117000.0
}

Set Stop Loss

Set or update stop-loss level for an existing position on Ostium.

⚠️ Dependencies — identical to Set Take Profit. You need ALL of these before calling:

1. agentAddress → from /club-details → ostium_agent_address
2. userAddress → from /club-details → user_wallet
3. tradeIndex → from /open-position response → actualTradeIndex, OR from /positions → tradeIndex
4. entryPrice → from /open-position response → entryPrice, OR from /positions → entryPrice
5. pairIndex → from /positions → pairIndex, OR from /symbols → symbol id
6. stopLossPercent → ASK the user (default: 0.10 = 10%)
7. side → from /positions → side ("long" or "short")

If you just opened a position: Use actualTradeIndex and entryPrice from the /open-position response. If the position was opened earlier: Call /positions to fetch tradeIndex, entryPrice, pairIndex, and side.

# Same dependency resolution as Set Take Profit (see above for full example)
# Step 1: Get addresses from /club-details
# Step 2: Get position details from /positions
# Step 3: Set stop loss with user-specified stopLossPercent

curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/set-stop-loss" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}" \
  -H "Content-Type: application/json" \
  -d '{
    "agentAddress": "0x...",
    "userAddress": "0x...",
    "market": "BTC",
    "tradeIndex": 2,
    "stopLossPercent": 0.10,
    "entryPrice": 90000,
    "pairIndex": 0,
    "side": "long"
  }'

Request Body:

{
  "agentAddress": "0x...",        // REQUIRED — from /club-details. NEVER guess.
  "userAddress": "0x...",         // REQUIRED — from /club-details. NEVER guess.
  "market": "BTC",                // REQUIRED — Token symbol
  "tradeIndex": 2,                // REQUIRED — from /open-position or /positions. NEVER guess.
  "stopLossPercent": 0.10,         // Optional (default: 0.10 = 10%). ASK the user.
  "entryPrice": 90000,             // REQUIRED — from /open-position or /positions. NEVER guess.
  "pairIndex": 0,                  // REQUIRED — from /positions or /symbols. NEVER guess.
  "side": "long",                  // Optional (default: "long") — from /positions.
  "isTestnet": false              // Optional (default: false)
}

Response:

{
  "success": true,
  "message": "Stop loss set successfully",
  "slPrice": 81000.0,
  "liquidationPrice": 85500.0,
  "adjusted": false
}

Get All Market Data

Retrieve the complete market snapshot from Ostium, including all symbols and their full LunarCrush metrics. This is highly recommended for AI agents that want to perform market-wide scanning or analysis in a single request.

curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/market-data" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}"

Response:

{
  "success": true,
  "data": [
    {
      "id": 0,
      "symbol": "BTC/USD",
      "group": "crypto",
      "maxLeverage": 150,
      "metrics": {
        "galaxy_score": 72.5,
        "alt_rank": 1,
        "social_volume_24h": 15234,
        "sentiment": 68.3,
        "percent_change_24h": 2.45,
        "volatility": 0.032,
        "price": "95000.12345678",
        "volume_24h": "45000000000.00000000",
        "market_cap": "1850000000000.00000000",
        "market_cap_rank": 1,
        "social_dominance": 45.2,
        "market_dominance": 52.1,
        "interactions_24h": 890000,
        "galaxy_score_previous": 70.1,
        "alt_rank_previous": 1
      },
      "updated_at": "2026-02-14T08:30:00.000Z"
    },
    ...
  ],
  "count": 45
}

Get Token Price

Fetch the current market price for a token from Ostium price feed.

curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/price?token=BTC&isTestnet=false" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}"

Query Parameters:

Response:

{
  "success": true,
  "token": "BTC",
  "price": 95000.0,
  "isMarketOpen": true,
  "isDayTradingClosed": false
}

Discover Traders to Copy (Copy Trading — Step 1)

Discover other OpenClaw Traders and top-performing traders to potentially copy-trade. This is the first step in the copy-trading workflow — the returned wallet addresses are used as the address parameter in the /copy-trader-trades endpoint.

⚠️ Dependency Chain: This endpoint provides the wallet addresses needed by /copy-trader-trades. You MUST call this endpoint FIRST to get trader addresses — do NOT guess or hardcode addresses.

🚫 Self-copy guard: Never use your own user_wallet from /club-details as a copy-trader address.

# Get all traders (OpenClaw + Leaderboard)
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/copy-traders" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}"

# Get only OpenClaw Traders (prioritized)
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/copy-traders?source=openclaw" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}"

# Get only Leaderboard traders with filters
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/copy-traders?source=leaderboard&minImpactFactor=50&minTrades=100" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}"

Query Parameters:

Response:

{
  "success": true,
  "openclawTraders": [
    {
      "agentId": "3dbc322f-...",
      "agentName": "OpenClaw Trader - 140226114735",
      "creatorWallet": "0x4e7f1e29d9e1f81c3e9249e3444843c2006f3325",
      "venue": "OSTIUM",
      "status": "PRIVATE",
      "isCopyTradeClub": false,
      "performance": {
        "apr30d": 0,
        "apr90d": 0,
        "aprSinceInception": 0,
        "sharpe30d": 0
      },
      "deployment": {
        "id": "dep-uuid",
        "status": "ACTIVE",
        "safeWallet": "0x...",
        "isTestnet": false
      }
    }
  ],
  "topTraders": [
    {
      "walletAddress": "0xabc...",
      "totalVolume": "1500000.000000",
      "totalClosedVolume": "1200000.000000",
      "totalPnl": "85000.000000",
      "totalProfitTrades": 120,
      "totalLossTrades": 30,
      "totalTrades": 150,
      "winRate": 0.80,
      "lastActiveAt": "2026-02-15T10:30:00.000Z",
      "scores": {
        "edgeScore": 0.82,
        "consistencyScore": 0.75,
        "stakeScore": 0.68,
        "freshnessScore": 0.92,
        "impactFactor": 72.5
      },
      "updatedAt": "2026-02-17T06:00:00.000Z"
    }
  ],
  "openclawCount": 5,
  "topTradersCount": 20
}

Key fields to use in next steps:

• openclawTraders[].creatorWallet → use as address in /copy-trader-trades
• topTraders[].walletAddress → use as address in /copy-trader-trades
• Exclude any address equal to your own /club-details.user_wallet

Get Trader's Recent Trades (Copy Trading — Step 2)

Fetch recent on-chain trades for a specific trader address. This queries the Ostium subgraph in real-time for fresh trade data.

⚠️ Dependency: The address parameter MUST come from the /copy-traders endpoint response:

• For OpenClaw traders: use creatorWallet from openclawTraders[]
• For leaderboard traders: use walletAddress from topTraders[]

NEVER guess or hardcode the address. Always call /copy-traders first.

# Step 1: Discover traders first
TRADER_ADDRESS=$(curl -s -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/copy-traders?source=openclaw" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}" | jq -r '.openclawTraders[0].creatorWallet')

# Step 2: Fetch their recent trades
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/copy-trader-trades?address=${TRADER_ADDRESS}" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}"

# With custom lookback and limit
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/copy-trader-trades?address=${TRADER_ADDRESS}&hours=48&limit=50" \
  -H "X-API-KEY: ${MAXXIT_API_KEY}"

Query Parameters:

Response:

{
  "success": true,
  "traderAddress": "0x4e7f1e29d9e1f81c3e9249e3444843c2006f3325",
  "trades": [
    {
      "tradeId": "0x123...",
      "side": "LONG",
      "tokenSymbol": "BTC",
      "pair": "BTC/USD",
      "collateral": 500.00,
      "leverage": 10.0,
      "entryPrice": 95000.50,
      "takeProfitPrice": 100000.00,
      "stopLossPrice": 90000.00,
      "timestamp": "2026-02-17T14:30:00.000Z"
    }
  ],
  "count": 5,
  "lookbackHours": 24
}

Trade Field Descriptions:

Next step: After reviewing the trades, use /open-position to open a similar position. You'll need your own agentAddress and userAddress from /club-details.

Signal Format Examples

The lazy trading system processes natural language trading signals. Here are examples:

Opening Positions

• "Long ETH with 5x leverage, entry at 3200"
• "Short BTC 10x, TP 60000, SL 68000"
• "Buy 100 USDC worth of ETH perpetual"

With Risk Management

• "Long SOL 3x leverage, entry 150, take profit 180, stop loss 140"
• "Short AVAX 5x, risk 2% of portfolio"

Closing Positions

• "Close ETH long position"
• "Take profit on BTC short"

Complete Workflow Examples

These are the mandatory step-by-step workflows for common trading operations. Follow these exactly.

Workflow 1: Opening a New Position (Full Flow)

Step 1: GET /club-details
   → Extract: user_wallet (→ userAddress), ostium_agent_address (→ agentAddress)
   → Cache these for the session

Step 2: GET /symbols
   → Verify the user's requested token is available on Ostium
   → Extract exact symbol string and maxLeverage
   → Convert pair format to market token for /open-position:
     "ETH/USD" -> "ETH"

Step 3: GET /lunarcrush?symbol=TOKEN/USD  (or GET /market-data for all)
   → Get market data: price, sentiment, volatility, galaxy_score
   → Present this data to the user:
     "BTC is currently at $95,000 with sentiment 68.3 (bullish) and volatility 0.032 (normal).
      Galaxy Score: 72.5/100. Do you want to proceed?"

Step 4: ASK the user for trade parameters
   → "Please confirm: collateral (USDC), leverage, long or short?"
   → "Would you like to set TP and SL? If so, what percentages?"
   → Wait for explicit user confirmation before proceeding

Step 5: POST /open-position
   → Use agentAddress and userAddress from Step 1
   → Use market, side, collateral, leverage from Step 4
   → IMPORTANT: Pass market as base token only (e.g. ETH), not pair format (ETH/USD)
   → SAVE the response: actualTradeIndex and entryPrice

Step 6 (if user wants TP/SL): POST /set-take-profit and/or POST /set-stop-loss
   → Use tradeIndex = actualTradeIndex from Step 5
   → Use entryPrice from Step 5
   → For pairIndex, use the symbol id from Step 2 or call /positions
   → Use takeProfitPercent/stopLossPercent from Step 4

Step 7: ASK — "Would you like to list this trade as alpha on the marketplace?"
   → If user says NO → Done.
   → If user says YES → Continue to Step 8.
   → Also ask: "What price in USDC would you like to charge?" (e.g. 5 USDC)

Step 8: POST /alpha/generate-proof
   → Body: { "tradeId": "{tradeId from Step 5}", "autoProcess": false }
   → tradeId comes from the /open-position response
   → autoProcess: false queues the proof for the worker (~3-5 min)
   → SAVE: pro

…(truncated)