Oblien Runtime

Oblien Workspace Runtime

You are operating inside an Oblien workspace — an isolated Firecracker microVM with its own Linux kernel, filesystem, and network interface. This is not a container. You have full root access to a real Linux environment.

What you can do

The workspace runs an Internal API — an HTTP server on port 9990 inside the VM. Through this API you can:

• Read and write files anywhere on the filesystem
• Execute commands synchronously or stream output in real-time via SSE
• Search code using ripgrep (content search) or filesystem search (filename matching)
• Open interactive terminal sessions over WebSocket (multiplexed PTY)
• Watch for file changes in real-time over WebSocket

How authentication works

There are two ways to reach this API:

Gateway access requires public_access: true on the workspace network config. Direct access requires a private link between the two workspaces.

Key facts

• The filesystem persists across restarts (writable overlay on top of the base image)
• Default working directory is /root
• Outbound internet is ON by default, inbound is OFF by default (network-dark)
• The workspace has dedicated CPU, memory, and disk — configured at creation time
• Port 9990 is the Internal API. Your application can use any other port.

The reference below covers every Internal API endpoint with parameters, response schemas, and code examples.

Connection & Authentication

Before using the Workspace Internal API, the HTTP server inside the VM must be enabled. Once enabled, there are two ways to connect:

Both methods hit the same server and the same endpoints. The difference is how you authenticate and how the request reaches the VM.

Enable the server

Start the internal server via the Oblien API. This returns a Gateway JWT for immediate use.

SDK:

const client = new Oblien({
  clientId: process.env.OBLIEN_CLIENT_ID!,
  clientSecret: process.env.OBLIEN_CLIENT_SECRET!,
});

const access = await client.workspaces.apiAccess.enable('ws_a1b2c3d4');
console.log(access.token);   // Gateway JWT (eyJhbG...)
console.log(access.enabled); // true

REST API:

POST https://api.oblien.com/workspace/ws_a1b2c3d4/internal-api-access/enable
X-Client-ID: your_client_id
X-Client-Secret: your_client_secret

cURL:

curl -X POST "https://api.oblien.com/workspace/ws_a1b2c3d4/internal-api-access/enable" \
  -H "X-Client-ID: $OBLIEN_CLIENT_ID" \
  -H "X-Client-Secret: $OBLIEN_CLIENT_SECRET"

Note: Enable is idempotent - calling it on an already-enabled workspace returns a fresh JWT without restarting the server.

Gateway connection

Use the Gateway JWT to access the workspace through workspace.oblien.com. The JWT embeds the VM's private IP and port - the gateway decodes it and routes your request to the correct VM automatically.

Warning: The target workspace must have public_access: true in its network configuration. Without it, the gateway cannot reach the VM through the firewall. Enable it via the Network API:

await client.workspaces.network.update('ws_a1b2c3d4', { public_access: true });

SDK:

// The SDK manages tokens automatically via client.workspaces.runtime()
const rt = await client.workspaces.runtime('ws_a1b2c3d4');

const files = await rt.files.list({ dirPath: '/app' });
const result = await rt.exec.run(['ls', '-la']);
await rt.terminal.create({ shell: '/bin/bash' });

REST API:

GET https://workspace.oblien.com/files?path=/app
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...

cURL:

# HTTP
curl "https://workspace.oblien.com/files?path=/app" \
  -H "Authorization: Bearer $GATEWAY_JWT"

# WebSocket
wscat -c "wss://workspace.oblien.com/ws" \
  -H "Authorization: Bearer $GATEWAY_JWT"

Warning: The URL is workspace.oblien.com/endpoint - not workspace.oblien.com/ws_id/endpoint. Routing is handled by the JWT payload, not the URL path.

Token lifetime

The standard Gateway JWT expires after ~1 hour. You have two options to manage this:

• Rotate - call rotateToken or re-enable to get a fresh short-lived JWT
• Force refresh - use client.workspaces.runtime(id, { force: true }) in the SDK to bypass the cached token

Both token types work the same way - Authorization: Bearer <token> against workspace.oblien.com. The only difference is expiry.

Direct connection

For workspace-to-workspace communication, connect directly to the target VM's private IP. This bypasses the gateway entirely - lower latency, no JWT overhead.

Setup flow

1. Enable the server on the target workspace
2. Create a private link from caller → target
3. Get the raw token + private IP of the target
4. Call the target directly from the calling workspace

Step 1: Enable the target

await client.workspaces.apiAccess.enable('ws_target');

Step 2: Create a private link

Private links open a network path between two workspaces. Without a link, VMs cannot reach each other - they are network-dark by default. The link whitelists the caller's IP in the target workspace's firewall.

await client.workspaces.network.update('ws_target', {
  private_link_ids: ['ws_caller'],
});

Note: The private_link_ids field takes workspace IDs, not IPs. The platform resolves each ID to its internal IP and configures the target's firewall automatically. See Private Links for details.

Step 3: Get the raw connection token

The raw token is a hex string used directly by the VM's auth middleware. Unlike the Gateway JWT, it doesn't embed routing info - you provide the IP yourself.

const raw = await client.workspaces.apiAccess.rawToken('ws_target');

console.log(raw.token); // "a1b2c3d4e5f6..."
console.log(raw.ip);    // "10.0.1.42"
console.log(raw.port);  // 9990

See the full endpoint reference at Raw token.

Step 4: Call from the other workspace

From code running inside ws_caller, call ws_target directly over the private network:

// Running inside ws_caller
const res = await fetch('http://10.0.1.42:9990/files?path=/app', {
  headers: { 'Authorization': `Bearer ${raw.token}` },
});
const files = await res.json();

curl "http://10.0.1.42:9990/exec" \
  -H "Authorization: Bearer a1b2c3d4e5f6..." \
  -H "Content-Type: application/json" \
  -d '{"cmd":["npm","test"]}'

Note: Direct calls go VM-to-VM - no gateway, no JWT encoding/decoding overhead. This is the lowest-latency way to interact with a workspace.

Disable the server

Stop the internal server, kill all sessions, and close connections.

await client.workspaces.apiAccess.disable('ws_a1b2c3d4');

See the full endpoint reference at Disable server.

Token comparison

Full API access reference

All server management endpoints are on the Oblien API at api.oblien.com:

Files

The file system endpoints let you list, read, write, and delete files inside the workspace VM. All paths are absolute filesystem paths (e.g. /app/src/main.go).

Note: Requires the internal server to be enabled. All requests require a valid token - see Connection & Auth.

List directory

List files and directories in a given path. Supports recursive traversal, content inclusion, hash computation, and filtering.

SDK:

const rt = await client.workspaces.runtime('ws_a1b2c3d4');

const result = await rt.files.list({
  dirPath: '/app/src',
  nested: true,
  flatten: true,
  includeContent: true,
  codeFilesOnly: true,
  maxDepth: 5,
});

console.log(result.entries);       // fileEntry[]
console.log(result.count);         // number of entries

REST API:

GET https://workspace.oblien.com/files?path=/app/src&nested=true&flatten=true&include_content=true&code_files_only=true&max_depth=5
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...

cURL:

curl "https://workspace.oblien.com/files?path=/app/src&nested=true&flatten=true&include_content=true&code_files_only=true&max_depth=5" \
  -H "Authorization: Bearer $GATEWAY_JWT"

Parameters

Response

{
  "success": true,
  "path": "/app/src",
  "entries": [
    {
      "name": "main.go",
      "path": "/app/src/main.go",
      "type": "file",
      "size": 1234,
      "modified": "2025-01-15T10:30:00Z",
      "extension": ".go",
      "content": "package main\n...",
      "hash": "a1b2c3..."
    },
    {
      "name": "utils",
      "path": "/app/src/utils",
      "type": "directory",
      "children": [...]
    }
  ],
  "count": 42
}

Warning: The list endpoint is capped at 50,000 entries. For large directories, use path_filter, include_ext, or code_files_only to narrow results, or use the stream endpoint for NDJSON streaming.

Stream directory

Stream directory entries as NDJSON (newline-delimited JSON). Ideal for large directories - entries flow to the client as they're discovered, without accumulating in memory.

SDK:

for await (const entry of rt.files.stream({
  dirPath: '/app',
  includeContent: true,
  codeFilesOnly: true,
})) {
  console.log(entry.name, entry.path);
}

REST API:

GET https://workspace.oblien.com/files/stream?path=/app&include_content=true&code_files_only=true
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...

Response: Content-Type: application/x-ndjson

cURL:

curl -N "https://workspace.oblien.com/files/stream?path=/app&include_content=true&code_files_only=true" \
  -H "Authorization: Bearer $GATEWAY_JWT"

Parameters

Same as List directory. The nested and flatten options are always enabled for streaming.

Response format

Each line is a JSON object. The stream starts with a start event and ends with a done event:

{"event":"start","path":"/app"}
{"name":"main.go","path":"/app/main.go","type":"file","size":1234}
{"name":"utils.go","path":"/app/utils.go","type":"file","size":567}
{"event":"done","count":2}

Note: The stream endpoint uses batched directory reads for memory efficiency. Entries are not sorted - they arrive in filesystem order. Use the list endpoint if you need sorted output.

Read file

Read the content of a file. Supports line ranges for partial reads.

SDK:

const file = await rt.files.read({
  filePath: '/app/src/main.go',
});

console.log(file.content);    // file content as string
console.log(file.lines);      // number of lines returned
console.log(file.size);       // file size in bytes

// Read specific line range
const partial = await rt.files.read({
  filePath: '/app/src/main.go',
  startLine: 10,
  endLine: 25,
  withLineNumbers: true,
});

REST API:

GET https://workspace.oblien.com/files/read?path=/app/src/main.go&start_line=10&end_line=25&with_line_numbers=true
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...

cURL:

curl "https://workspace.oblien.com/files/read?path=/app/src/main.go&start_line=10&end_line=25&with_line_numbers=true" \
  -H "Authorization: Bearer $GATEWAY_JWT"

Parameters

Response

{
  "success": true,
  "path": "/app/src/main.go",
  "content": "package main\n\nfunc main() {\n\tfmt.Println(\"hello\")\n}",
  "size": 1234,
  "lines": 5,
  "extension": ".go",
  "start_line": 10,
  "end_line": 25
}

start_line and end_line are only included when a line range was requested.

Write file

Create or overwrite a file. Uses atomic write (temp file + rename) by default. Accepts both POST and PUT.

SDK:

const result = await rt.files.write({
  fullPath: '/app/src/hello.txt',
  content: 'Hello, world!',
  createDirs: true,
});

console.log(result.path);  // "/app/src/hello.txt"
console.log(result.size);  // 13

// Append to an existing file
await rt.files.write({
  fullPath: '/app/logs/output.log',
  content: 'New log entry\n',
  append: true,
  createDirs: true,
});

REST API:

POST https://workspace.oblien.com/files/write
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...
Content-Type: application/json

{
  "path": "/app/src/hello.txt",
  "content": "Hello, world!",
  "create_dirs": true
}

cURL:

curl -X POST "https://workspace.oblien.com/files/write" \
  -H "Authorization: Bearer $GATEWAY_JWT" \
  -H "Content-Type: application/json" \
  -d '{"path":"/app/src/hello.txt","content":"Hello, world!","create_dirs":true}'

Parameters

Response

{
  "success": true,
  "path": "/app/src/hello.txt",
  "size": 13
}

HTTP status: 201 Created

Create directory

Create a directory and any necessary parent directories.

SDK:

await rt.files.mkdir({
  path: '/app/src/utils/helpers',
});

REST API:

POST https://workspace.oblien.com/files/mkdir
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...
Content-Type: application/json

{
  "path": "/app/src/utils/helpers"
}

cURL:

curl -X POST "https://workspace.oblien.com/files/mkdir" \
  -H "Authorization: Bearer $GATEWAY_JWT" \
  -H "Content-Type: application/json" \
  -d '{"path":"/app/src/utils/helpers"}'

Parameters

Response

{
  "success": true,
  "path": "/app/src/utils/helpers"
}

HTTP status: 201 Created

Stat

Get detailed information about a file or directory.

SDK:

const info = await rt.files.stat({
  path: '/app/src/main.go',
});

console.log(info.type);        // "file"
console.log(info.size);        // 1234
console.log(info.permissions); // "0644"
console.log(info.is_code);     // true

REST API:

GET https://workspace.oblien.com/files/stat?path=/app/src/main.go
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...

cURL:

curl "https://workspace.oblien.com/files/stat?path=/app/src/main.go" \
  -H "Authorization: Bearer $GATEWAY_JWT"

Parameters

Response

{
  "success": true,
  "path": "/app/src/main.go",
  "name": "main.go",
  "type": "file",
  "size": 1234,
  "modified": "2025-01-15T10:30:00Z",
  "permissions": "0644",
  "is_code": true,
  "extension": ".go"
}

For symlinks:

{
  "success": true,
  "path": "/app/link",
  "name": "link",
  "type": "symlink",
  "size": 0,
  "modified": "2025-01-15T10:30:00Z",
  "permissions": "0777",
  "is_code": false,
  "symlink_target": "/app/src/main.go"
}

Delete

Delete a file or directory. Directories are removed recursively.

SDK:

await rt.files.delete({
  path: '/app/src/old-file.txt',
});

REST API:

DELETE https://workspace.oblien.com/files/delete?path=/app/src/old-file.txt
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...

cURL:

curl -X DELETE "https://workspace.oblien.com/files/delete?path=/app/src/old-file.txt" \
  -H "Authorization: Bearer $GATEWAY_JWT"

Parameters

The path can also be provided in the request body as {"path": "..."}.

Response

{
  "success": true,
  "path": "/app/src/old-file.txt"
}

Warning: System paths (/, /bin, /sbin, /usr, /lib, /lib64, /etc, /dev, /proc, /sys, /boot, /run) are protected and cannot be deleted.

Error responses

All file endpoints return errors in a consistent format:

{
  "error": "file not found: /app/missing.txt"
}

Search

Two search modes are available inside the workspace:

• Content search - powered by ripgrep, searches file contents with regex, whole-word, and context line support
• Filename search - built-in filesystem search that matches against file paths

Note: Requires the internal server to be enabled. Content search requires ripgrep - use the install endpoint to set it up.

Content search

Search file contents using ripgrep. Results are grouped by file with line numbers and match context.

SDK:

const rt = await client.workspaces.runtime('ws_a1b2c3d4');

const results = await rt.search.content({
  query: 'handleRequest',
  path: '/app/src',
  contextLines: 2,
  maxResults: 100,
});

for (const file of results.results) {
  console.log(file.path);
  for (const match of file.matches) {
    console.log(`  Line ${match.line}: ${match.text}`);
  }
}

REST API:

GET https://workspace.oblien.com/files/search?q=handleRequest&path=/app/src&context_lines=2&max_results=100
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...

cURL:

curl "https://workspace.oblien.com/files/search?q=handleRequest&path=/app/src&context_lines=2&max_results=100" \
  -H "Authorization: Bearer $GATEWAY_JWT"

Parameters

Response

Results are returned as an object keyed by file path, with each value being an array of matches:

{
  "success": true,
  "query": "handleRequest",
  "path": "/app/src",
  "results": {
    "src/server.go": [
      {
        "line": 42,
        "column": 6,
        "text": "func handleRequest(w http.ResponseWriter, r *http.Request) {"
      },
      {
        "line": 105,
        "column": 2,
        "text": "\thandleRequest(w, r)"
      }
    ],
    "src/router.go": [
      {
        "line": 18,
        "column": 12,
        "text": "\trouter.HandleFunc(\"/\", handleRequest)"
      }
    ]
  },
  "total_matches": 3,
  "total_files": 2,
  "capped": false
}

Filename search

Search for files by name. Uses a fast filesystem walk with substring matching on relative paths.

SDK:

const results = await rt.search.files({
  query: 'controller',
  path: '/app/src',
  maxResults: 50,
});

console.log(results.files);        // ["auth/controller.go", "user/controller.go"]
console.log(results.total_files);  // 2

REST API:

GET https://workspace.oblien.com/files/search/files?q=controller&path=/app/src&max_results=50
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...

cURL:

curl "https://workspace.oblien.com/files/search/files?q=controller&path=/app/src&max_results=50" \
  -H "Authorization: Bearer $GATEWAY_JWT"

Parameters

Response

{
  "success": true,
  "query": "controller",
  "path": "/app/src",
  "files": [
    "auth/controller.go",
    "user/controller.go"
  ],
  "total_files": 2
}

Note: Filename search does not require ripgrep - it works out of the box with no additional setup.

Ripgrep status

Check if ripgrep is installed and available for content search.

SDK:

const status = await rt.search.status();
console.log(status.installed); // true or false
console.log(status.version);   // "ripgrep 14.1.0" or null

REST API:

GET https://workspace.oblien.com/files/search/init
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...

cURL:

curl "https://workspace.oblien.com/files/search/init" \
  -H "Authorization: Bearer $GATEWAY_JWT"

Response

When ripgrep is installed:

{
  "success": true,
  "installed": true,
  "path": "/usr/local/bin/rg",
  "version": "ripgrep 14.1.0"
}

When not installed:

{
  "success": true,
  "installed": false,
  "message": "ripgrep is not installed - use POST /files/search/init to install"
}

Install ripgrep

Download and install ripgrep from GitHub releases. This is a one-time setup per workspace.

SDK:

const result = await rt.search.init();
console.log(result.installed); // true
console.log(result.version);   // "14.1.1"

REST API:

POST https://workspace.oblien.com/files/search/init
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...

cURL:

curl -X POST "https://workspace.oblien.com/files/search/init" \
  -H "Authorization: Bearer $GATEWAY_JWT"

Response

{
  "success": true,
  "version": "ripgrep 14.1.0",
  "path": "/usr/local/bin/rg"
}

If ripgrep is already installed, the endpoint returns the current installation info without re-downloading.

Warning: Installation requires internet access from inside the workspace to download from GitHub releases. The binary is installed to /usr/local/bin/rg.

Error responses

Command Execution

The exec endpoints let you run commands inside the workspace VM. Commands can run synchronously (wait for result) or asynchronously (stream output via SSE). Long-running tasks persist in the background and can be polled, streamed, or killed.

Note: Requires the internal server to be enabled.

Overview

Two execution modes:

Run command

Execute a command inside the workspace.

SDK:

// Synchronous - wait for result
const rt = await client.workspaces.runtime('ws_a1b2c3d4');
const result = await rt.exec.run(['echo', 'hello']);

console.log(result.exit_code);  // 0
console.log(result.stdout);     // "hello\n"
console.log(result.stderr);     // ""

// Streaming - real-time output via async generator
for await (const ev of rt.exec.stream(['npm', 'install'])) {
  if (ev.event === 'stdout') process.stdout.write(atob(ev.data));
  if (ev.event === 'stderr') process.stderr.write(atob(ev.data));
  if (ev.event === 'exit') console.log(`Done: ${ev.exit_code}`);
}

REST API:

Synchronous:

POST https://workspace.oblien.com/exec
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...
Content-Type: application/json

{
  "cmd": ["echo", "hello"]
}

Streaming (SSE):

POST https://workspace.oblien.com/exec
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...
Content-Type: application/json

{
  "cmd": ["npm", "install"],
  "stream": true
}

cURL:

# Synchronous
curl -X POST "https://workspace.oblien.com/exec" \
  -H "Authorization: Bearer $GATEWAY_JWT" \
  -H "Content-Type: application/json" \
  -d '{"cmd": ["echo", "hello"]}'

# Streaming (SSE)
curl -N -X POST "https://workspace.oblien.com/exec" \
  -H "Authorization: Bearer $GATEWAY_JWT" \
  -H "Content-Type: application/json" \
  -d '{"cmd": ["npm", "install"], "stream": true}'

Parameters

Execution modes

Synchronous response

The response is the full task object:

{
  "id": "abc123",
  "command": ["echo", "hello"],
  "status": "exited",
  "guest_pid": 4521,
  "exit_code": 0,
  "stdout": "hello\n",
  "stderr": "",
  "created_at": "2025-01-15T10:30:00Z",
  "started_at": "2025-01-15T10:30:00Z",
  "exited_at": "2025-01-15T10:30:01Z",
  "ttl_seconds": 300
}

Streaming response (SSE)

When stream: true, the response is an SSE stream. The data payloads are JSON. stdout/stderr content is base64-encoded:

event: task_id
data: {"task_id":"abc123"}

event: stdout
data: {"data":"SW5zdGFsbGluZyBkZXBlbmRlbmNpZXMuLi4="}

event: stderr
data: {"data":"bnBtIHdhcm4gZGVwcmVjYXRlZA=="}

event: exit
data: {"exit_code": 0, "pid": 4521}

List tasks

List all tracked tasks.

SDK:

const tasks = await rt.exec.list();

for (const task of tasks) {
  console.log(`${task.id}: ${task.command.join(' ')} (status: ${task.status})`);
}

REST API:

GET https://workspace.oblien.com/exec
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...

cURL:

curl "https://workspace.oblien.com/exec" \
  -H "Authorization: Bearer $GATEWAY_JWT"

Response

{
  "success": true,
  "tasks": [
    {
      "id": "abc123",
      "command": ["npm", "install"],
      "status": "running",
      "guest_pid": 4521,
      "created_at": "2025-01-15T10:30:00Z",
      "started_at": "2025-01-15T10:30:00Z",
      "ttl_seconds": 300
    }
  ]
}

Task status values: pending, running, exited, failed.

Get task

Get the status and output of a specific task.

SDK:

const task = await rt.exec.get('abc123');

console.log(task.status);     // "exited"
console.log(task.exit_code);  // 0
console.log(task.stdout);     // "full output..."

REST API:

GET https://workspace.oblien.com/exec/abc123
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...

cURL:

curl "https://workspace.oblien.com/exec/abc123" \
  -H "Authorization: Bearer $GATEWAY_JWT"

Response

{
  "id": "abc123",
  "command": ["npm", "install"],
  "status": "exited",
  "guest_pid": 4521,
  "exit_code": 0,
  "stdout": "added 150 packages in 12s\n",
  "stderr": "",
  "created_at": "2025-01-15T10:30:00Z",
  "started_at": "2025-01-15T10:30:00Z",
  "exited_at": "2025-01-15T10:30:12Z",
  "ttl_seconds": 300
}

Kill task

Remove a task from tracking and close its stdin pipe.

SDK:

await rt.exec.kill('abc123');

REST API:

DELETE https://workspace.oblien.com/exec/abc123
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...

cURL:

curl -X DELETE "https://workspace.oblien.com/exec/abc123" \
  -H "Authorization: Bearer $GATEWAY_JWT"

Response

{
  "success": true
}

Delete all tasks

Remove all tasks from tracking and close stdin pipes.

REST API:

DELETE https://workspace.oblien.com/exec
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...

cURL:

curl -X DELETE "https://workspace.oblien.com/exec" \
  -H "Authorization: Bearer $GATEWAY_JWT"

Response

{
  "success": true,
  "deleted": 3
}

Send stdin

Send input to a running task's stdin. The request body is sent as raw bytes (not JSON).

SDK:

await rt.exec.input('abc123', 'yes\n');

REST API:

POST https://workspace.oblien.com/exec/abc123/input
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...
Content-Type: application/octet-stream

yes

cURL:

curl -X POST "https://workspace.oblien.com/exec/abc123/input" \
  -H "Authorization: Bearer $GATEWAY_JWT" \
  --data-binary 'yes
'

Response

{
  "success": true,
  "bytes_written": 4
}

Stream output (SSE)

Subscribe to real-time output from a running task. This is useful when you started a task with stream: false or from another client and want to attach to its output.

SDK:

for await (const ev of rt.exec.subscribe('abc123')) {
  if (ev.event === 'stdout') process.stdout.write(atob(ev.data));
  if (ev.event === 'stderr') process.stderr.write(atob(ev.data));
  if (ev.event === 'exit') console.log(`Exited: ${ev.exit_code}`);
}

REST API:

GET https://workspace.oblien.com/exec/stream?task_id=abc123
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...
Accept: text/event-stream

Or create and stream a new task via POST (alias for POST /exec with stream: true):

POST https://workspace.oblien.com/exec/stream
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...
Content-Type: application/json

{
  "cmd": ["npm", "install"]
}

cURL:

curl -N "https://workspace.oblien.com/exec/stream?task_id=abc123" \
  -H "Authorization: Bearer $GATEWAY_JWT"

SSE events

event: stdout
data: {"data":"SW5zdGFsbGluZyBkZXBlbmRlbmNpZXMuLi4="}

event: stderr
data: {"data":"bnBtIHdhcm4gZGVwcmVjYXRlZA=="}

event: exit
data: {"exit_code": 0, "pid": 4521}

When subscribing to a task that has already finished, the server sends an output event with buffered stdout/stderr as raw text, then the exit event.

Error responses

Terminal Sessions

The terminal endpoints let you create interactive PTY sessions inside the workspace VM. Terminal I/O is multiplexed over a single WebSocket connection.

Note: Requires the internal server to be enabled. Up to 10 concurrent terminal sessions per workspace.

Overview

1. Create a terminal session  →  get session ID
2. Open WebSocket at /ws      →  bidirectional I/O
3. Send stdin as binary       →  [id_byte][data]
4. Receive stdout as binary   →  [id_byte][data]
5. Resize / close via JSON messages or REST

Create session

Create a new terminal session with an interactive PTY.

SDK:

const rt = await client.workspaces.runtime('ws_a1b2c3d4');

const term = await rt.terminal.create({
  shell: '/bin/bash',
  cols: 120,
  rows: 40,
});

console.log(term.id);      // "1"
console.log(term.cols);    // 120
console.log(term.rows);    // 40

REST API:

POST https://workspace.oblien.com/terminals
Authorization: Bearer eyJhbGciOiJIUzI1NiIs...
Content-Type: application/json

{
  "cmd": ["/bin/bash"],
  "cols": 120,
  "rows": 40
}

cURL:

curl -X POST "https://workspace.oblien.com/terminals" \
  -H "Authorization: Bearer $GATEWAY_JWT" \
  -H "Content-Type: application/json" \
  -d '{"cmd":["/bin/bash"],"cols":120,"rows":40}'

Parameters

Response

{
  "success": true,
  "id": "1",
  "cols": 120,
  "rows": 40,
  "command": ["/bin/bash"]
}

HTTP status: 201 Created

List sessions

List all active terminal sessions.

SDK:

const sessions = await rt.terminal.list();

for (const term of sessions) {
  console.log(`${term.id}: ${term.command.join(' ')} (alive: ${term.alive})`);
}

REST API:

GET https://workspace.oblien.com/terminals
Authorization: Bearer eyJhbGciOiJI

…(truncated)