Okx Wallet Portfolio

OKX Wallet Portfolio CLI

4 commands for supported chains, wallet total value, all token balances, and specific token balances.

Pre-flight Checks

Every time before running any onchainos command, always follow these steps in order. Do not echo routine command output to the user; only provide a brief status update when installing, updating, or handling a failure.

1. Confirm installed: Run which onchainos. If not found, install it:

   curl -sSL https://raw.githubusercontent.com/okx/onchainos-skills/main/install.sh | sh
   

   If the install script fails, ask the user to install manually following the instructions at: https://github.com/okx/onchainos-skills

2. Check for updates: Read ~/.onchainos/last_check and compare it with the current timestamp:

   cached_ts=$(cat ~/.onchainos/last_check 2>/dev/null || true)
   now=$(date +%s)
   

   • If cached_ts is non-empty and (now - cached_ts) < 43200 (12 hours), skip the update and proceed.
   • Otherwise (file missing or older than 12 hours), run the installer to check for updates:

     curl -sSL https://raw.githubusercontent.com/okx/onchainos-skills/main/install.sh | sh
     

     If a newer version is installed, tell the user and suggest updating their onchainos skills from https://github.com/okx/onchainos-skills to get the latest features.

3. If any onchainos command fails with an unexpected error during this session, try reinstalling before giving up:

   curl -sSL https://raw.githubusercontent.com/okx/onchainos-skills/main/install.sh | sh
   

4. Create a .env file in the project root to override the default API credentials (optional — skip this for quick start):

   OKX_API_KEY=          # or OKX_ACCESS_KEY
   OKX_SECRET_KEY=
   OKX_PASSPHRASE=
   

Skill Routing

• For token prices / K-lines → use okx-dex-market
• For token search / metadata → use okx-dex-token
• For swap execution → use okx-dex-swap
• For transaction broadcasting → use okx-onchain-gateway

Quickstart

# Get supported chains for balance queries
onchainos portfolio chains

# Get total asset value on XLayer and Solana
onchainos portfolio total-value --address 0xYourWallet --chains "xlayer,solana"

# Get all token balances
onchainos portfolio all-balances --address 0xYourWallet --chains "xlayer,solana,ethereum"

# Check specific tokens (native OKB + USDC on XLayer)
onchainos portfolio token-balances --address 0xYourWallet --tokens "196:,196:0x74b7f16337b8972027f6196a17a631ac6de26d22"

Chain Name Support

The CLI accepts human-readable chain names and resolves them automatically.

Address format note: EVM addresses (0x...) work across Ethereum/BSC/Polygon/Arbitrum/Base etc. Solana addresses (Base58) and Bitcoin addresses (UTXO) have different formats. Do NOT mix formats across chain types.

Command Index

Cross-Skill Workflows

This skill is often used before swap (to verify sufficient balance) or as portfolio entry point.

Workflow A: Pre-Swap Balance Check

User: "Swap 1 SOL for BONK"

1. okx-dex-token    onchainos token search BONK --chains solana               → get tokenContractAddress
       ↓ tokenContractAddress
2. okx-wallet-portfolio  onchainos portfolio all-balances --address <addr> --chains solana
       → verify SOL balance >= 1
       ↓ balance field (UI units) → convert to minimal units for swap
3. okx-dex-swap     onchainos swap quote --from 11111111111111111111111111111111 --to <BONK_address> --amount 1000000000 --chain solana
4. okx-dex-swap     onchainos swap swap --from ... --to <BONK_address> --amount 1000000000 --chain solana --wallet <addr>

Data handoff:

• tokenContractAddress from token search → feeds into swap --from / --to
• balance from portfolio is UI units; swap needs minimal units → multiply by 10^decimal
• If balance < required amount → inform user, do NOT proceed to swap

Workflow B: Portfolio Overview + Analysis

User: "Show my portfolio"

1. okx-wallet-portfolio  onchainos portfolio total-value --address <addr> --chains "xlayer,solana,ethereum"
       → total USD value
2. okx-wallet-portfolio  onchainos portfolio all-balances --address <addr> --chains "xlayer,solana,ethereum"
       → per-token breakdown
       ↓ top holdings by USD value
3. okx-dex-token    onchainos token price-info <address> --chain <chain>  → enrich with 24h change, market cap
4. okx-dex-market   onchainos market kline <address> --chain <chain>      → price charts for tokens of interest

Workflow C: Sell Underperforming Tokens

1. okx-wallet-portfolio  onchainos portfolio all-balances --address <addr> --chains "xlayer,solana,ethereum"
       → list all holdings
       ↓ tokenContractAddress + chainIndex for each
2. okx-dex-token    onchainos token price-info <address> --chain <chain>  → get priceChange24H per token
3. Filter by negative change → user confirms which to sell
4. okx-dex-swap     onchainos swap quote → onchainos swap swap → execute sell

Key conversion: balance (UI units) × 10^decimal = amount (minimal units) for swap.

Operation Flow

Step 1: Identify Intent

• Check total assets → onchainos portfolio total-value
• View all token holdings → onchainos portfolio all-balances
• Check specific token balance → onchainos portfolio token-balances
• Unsure which chains are supported → onchainos portfolio chains first

Step 2: Collect Parameters

• Missing wallet address → ask user
• Missing target chains → recommend XLayer (--chains xlayer, low gas, fast confirmation) as the default, then ask which chain the user prefers. Common set: "xlayer,solana,ethereum,base,bsc"
• Need to filter risky tokens → set --exclude-risk 0 (only works on ETH/BSC/SOL/BASE)

Step 3: Call and Display

• Total value: display USD amount
• Token balances: show token name, amount (UI units), USD value
• Sort by USD value descending

Step 4: Suggest Next Steps

After displaying results, suggest 2-3 relevant follow-up actions:

Present conversationally, e.g.: "Would you like to see the price chart for your top holding, or swap any of these tokens?" — never expose skill names or endpoint paths to the user.

CLI Command Reference

1. onchainos portfolio chains

Get supported chains for balance queries. No parameters required.

onchainos portfolio chains

Return fields:

2. onchainos portfolio total-value

Get total asset value for a wallet address.

onchainos portfolio total-value --address <address> --chains <chains> [--asset-type <type>] [--exclude-risk <bool>]

Return fields:

3. onchainos portfolio all-balances

Get all token balances for a wallet address.

onchainos portfolio all-balances --address <address> --chains <chains> [--exclude-risk <value>]

Return fields (per token in tokenAssets[]):

4. onchainos portfolio token-balances

Get specific token balances for a wallet address.

onchainos portfolio token-balances --address <address> --tokens <tokens> [--exclude-risk <value>]

Return fields: Same schema as all-balances (tokenAssets[]).

Input / Output Examples

User says: "Check my wallet total assets on XLayer and Solana"

onchainos portfolio total-value --address 0xYourWallet --chains "xlayer,solana"
# → Display: Total assets $12,345.67

User says: "Show all tokens in my wallet"

onchainos portfolio all-balances --address 0xYourWallet --chains "xlayer,solana,ethereum"
# → Display:
#   OKB:  10.5 ($509.25)
#   USDC: 2,000 ($2,000.00)
#   USDT: 1,500 ($1,500.00)
#   ...

User says: "Only check USDC and native OKB balances on XLayer"

onchainos portfolio token-balances --address 0xYourWallet --tokens "196:,196:0x74b7f16337b8972027f6196a17a631ac6de26d22"
# → Display: OKB: 10.5 ($509.25), USDC: 2,000 ($2,000.00)

Edge Cases

• Zero balance: valid state — display $0.00, not an error
• Unsupported chain: call onchainos portfolio chains first to confirm
• chains exceeds 50: split into batches, max 50 per request
• --exclude-risk not working: only supported on ETH/BSC/SOL/BASE
• DeFi positions: use --asset-type 2 to query DeFi holdings separately
• Address format mismatch: EVM (0x…) and Solana/UTXO addresses have incompatible formats. Passing an EVM address with a Solana chain (or vice versa) causes the entire request to fail with an API error — no partial results are returned. Always make separate requests: one call for EVM chains using the EVM address, a separate call for Solana using the Solana address
• Network error: retry once, then prompt user to try again later
• Region restriction (error code 50125 or 80001): do NOT show the raw error code to the user. Instead, display a friendly message: ⚠️ Service is not available in your region. Please switch to a supported region and try again.

Amount Display Rules

• Token amounts in UI units (1.5 ETH), never base units (1500000000000000000)
• USD values with 2 decimal places
• Large amounts in shorthand ($1.2M)
• Sort by USD value descending

Global Notes

• --chains supports up to 50 chain IDs (comma-separated, names or numeric)
• --asset-type: 0=all 1=tokens only 2=DeFi only (only for total-value)
• --exclude-risk only works on ETH(1)/BSC(56)/SOL(501)/BASE(8453)
• token-balances supports max 20 token entries
• The CLI resolves chain names automatically (e.g., ethereum → 1, solana → 501)
• The CLI handles authentication internally via environment variables — see Prerequisites step 4 for default values