Signet Guardian

Signet Guardian — Payment Guard Middleware

Overview

Signet Guardian is a policy firewall for money actions. It does not intercept payments at runtime by itself; payment-capable skills must route through it by contract:

1. Before any payment: call signet-preflight (amount, currency, payee, purpose).
2. If result is ALLOW or CONFIRM_REQUIRED (and user has confirmed): the skill may proceed.
3. If result is DENY: do not proceed; tell the user the reason.
4. After a successful payment: call signet-record to append to the ledger.

This gives one place to enforce: master switch (payments on/off), max per transaction (e.g. £20), max per month (e.g. £500), and optional confirmation above a threshold (e.g. £5).

Concurrency: Preflight is advisory (no lock). Record enforces the monthly cap under a file lock ({baseDir}/references/.ledger.lock): it re-checks the cap before appending and refuses to record if the month would be exceeded. So the monthly limit is enforced at record time; idempotency and cap are both safe under concurrent calls. Preflight can still be used to fail fast; the definitive check is in record.

Currency: No FX conversion. The request currency must match the policy currency; otherwise preflight returns DENY. Conversion source/rules are not defined.

Policy (user configuration)

Source of truth: OpenClaw config first (signet.policy in the main config, e.g. editable in the Control UI if the extension is installed), then fallback to {baseDir}/references/policy.json. OpenClaw sets {baseDir} via OPENCLAW_SKILL_DIR or OPENCLAW_BASE_DIR.

Default behaviour: If the policy file is missing or invalid, preflight returns DENY (default-deny).

Commands

signet-preflight

Run before initiating any payment. Validates: payments enabled, currency match, amount > 0 and ≤ max per transaction, (current month spend + amount) ≤ max per month, and optional merchant rules. Optionally requires explicit confirmation above a threshold. Amount must be greater than zero.

signet-preflight --amount 15 --currency GBP --payee "shop.example.com" --purpose "Subscription"

Optional:

• --idempotency-key "unique-key" — Used when recording later to avoid duplicate ledger entries.
• --caller-skill "skill-name" — Name of the skill invoking the guard (for audit).

Output (JSON):

• { "result": "ALLOW", "reason": "Within policy" } — Proceed with the payment.
• { "result": "CONFIRM_REQUIRED", "reason": "..." } — Ask the user for explicit confirmation; if they agree, proceed then call signet-record. (Confirmation is the caller’s responsibility.)
• { "result": "DENY", "reason": "..." } — Do not proceed. Notify the user.

Every DENY is logged to the audit trail.

Exit code: 0 for ALLOW or CONFIRM_REQUIRED, 1 for DENY.

signet-record

Call after a payment has successfully been made. Appends one line to the ledger (append-only). If an idempotency key was used in preflight, pass the same key here to avoid double-counting.

Record validation scope: signet-record re-checks only currency and monthly cap (under lock). It does not re-check paymentsEnabled or merchant allow/block lists. Policy enforcement (switch, merchants, per-tx limit) is done at preflight (and in an optional future authorize phase). Record is the post-success log; the cap check at record time prevents double-counting when concurrent preflights both allowed.

signet-record --amount 15 --currency GBP --payee "shop.example.com" --purpose "Subscription" --idempotency-key "sub-123"

Optional: --caller-skill "skill-name" for audit.

If the same idempotency-key was already recorded, the command is a no-op (idempotent).

signet-report

Shows spending and transaction history for the user.

signet-report --period today
signet-report --period month

signet-policy

Show, edit, or configure policy via wizard.

signet-policy --show    # Print current policy (config, then file)
signet-policy --edit    # Open policy.json in $EDITOR
signet-policy --wizard  # Interactive step-by-step setup (no JSON)
signet-policy --migrate-file-to-config  # One-time: copy file policy into OpenClaw config

Audit (ledger and deny log)

Ledger file: {baseDir}/references/ledger.jsonl. Format is strict JSONL: one JSON object per line, newline-separated (no space between entries). Each line contains:

• ts — Timestamp UTC (ISO 8601).
• callerSkill — Optional; skill that invoked preflight/record.
• idempotencyKey — Optional; dedupe key for record.
• status — completed or denied.
• reason — Decision reason (especially for denials).
• Plus: amount, currency, payee, purpose.

All preflight denials are appended to the same ledger with status: "denied" and a reason.

Critical Rules (for the agent)

1. Never skip preflight — Any payment from any skill must go through signet-preflight first. No exceptions.
2. Respect DENY — If preflight returns DENY, do not attempt the payment. Tell the user the reason.
3. CONFIRM_REQUIRED — If preflight returns CONFIRM_REQUIRED, ask the user explicitly (“Allow this payment of £X to Y?”). Only proceed if they confirm, then call signet-record.
4. Always record success — After a successful payment, call signet-record with the same amount, currency, payee, purpose, and idempotency key (if used).
5. Idempotency — For critical flows, use a stable --idempotency-key (e.g. order ID or request ID) so retries do not double-count in the monthly total.
6. Default-deny — If the policy file is missing or corrupt, the skill denies by default.
7. Record is authoritative for cap only — The monthly cap is enforced when recording (under lock). If signet-record fails with a cap error, the payment already happened; do not retry without user confirmation. For cap-safe flows before payment, a future authorize (reservation under lock) then settle (convert reservation to completed) pattern can reserve budget before the payment is made.

First Run

On first use, the user must have a valid {baseDir}/references/policy.json. Run signet-policy --show to see current policy; if missing, create it (e.g. via signet-policy --edit) with at least:

• paymentsEnabled: true/false
• maxPerTransaction: number
• maxPerMonth: number
• currency: e.g. "GBP"
• requireConfirmationAbove: number (e.g. 5)

Ledger lives at {baseDir}/references/ledger.jsonl; no extra setup required.