Switchbot Openapi

SwitchBot OpenAPI Skill

This skill equips the agent to operate SwitchBot devices via HTTPS requests to the official OpenAPI v1.1. It includes ready-to-run scripts and a Node CLI; use these instead of re-deriving the HMAC signature each time.

Quick Start (Operator)

1. Set environment variables:

• SWITCHBOT_TOKEN: your OpenAPI token
• SWITCHBOT_SECRET: your OpenAPI secret

2. Test (list devices):

• Bash: scripts/list_devices.sh
• Node: node scripts/switchbot_cli.js list

3. Common tasks:

Basic controls:

• List devices: node scripts/switchbot_cli.js list
• Get status: node scripts/switchbot_cli.js status <deviceId>
• Turn on/off: node scripts/switchbot_cli.js cmd <deviceId> turnOn / turnOff
• Toggle: node scripts/switchbot_cli.js cmd <deviceId> toggle
• Press (Bot): node scripts/switchbot_cli.js cmd <deviceId> press

Curtain / Curtain 3:

• Set position: node scripts/switchbot_cli.js cmd <deviceId> setPosition --pos=50 (0=open, 100=closed; CLI auto-formats to 0,ff,50)
• Pause: node scripts/switchbot_cli.js cmd <deviceId> pause

Lock / Lock Pro / Lock Ultra / Lock Lite:

• Lock/Unlock: node scripts/switchbot_cli.js cmd <deviceId> lock / unlock
• Deadbolt: node scripts/switchbot_cli.js cmd <deviceId> deadbolt

Lights (Color Bulb / Strip Light / Floor Lamp / Strip Light 3 / RGBICWW etc.):

• Set color: node scripts/switchbot_cli.js cmd <deviceId> setColor --param="255:100:0"
• Set brightness: node scripts/switchbot_cli.js cmd <deviceId> setBrightness --param=80
• Set color temp: node scripts/switchbot_cli.js cmd <deviceId> setColorTemperature --param=4000

Fans (Battery Circulator Fan / Circulator Fan / Standing Circulator Fan):

• Wind mode: node scripts/switchbot_cli.js cmd <deviceId> setWindMode --param=natural
• Wind speed: node scripts/switchbot_cli.js cmd <deviceId> setWindSpeed --param=50
• Night light: node scripts/switchbot_cli.js cmd <deviceId> setNightLightMode --param=1
• Auto-off timer: node scripts/switchbot_cli.js cmd <deviceId> closeDelay --param=3600

Robot Vacuum S1/S1 Plus/K10+/K10+ Pro:

• Start: node scripts/switchbot_cli.js cmd <deviceId> start
• Stop: node scripts/switchbot_cli.js cmd <deviceId> stop
• Dock: node scripts/switchbot_cli.js cmd <deviceId> dock
• Suction: node scripts/switchbot_cli.js cmd <deviceId> PowLevel --param=2

Robot Vacuum K10+ Pro Combo / K20+ Pro / S10 / S20 / K11+:

• Start clean: node scripts/switchbot_cli.js cmd <deviceId> startClean --param='{"action":"sweep_mop","param":{"fanLevel":2,"waterLevel":1,"times":1}}'
• Pause/Dock: node scripts/switchbot_cli.js cmd <deviceId> pause / dock
• Volume: node scripts/switchbot_cli.js cmd <deviceId> setVolume --param=50
• Self clean (S10/S20): node scripts/switchbot_cli.js cmd <deviceId> selfClean --param=1

Blind Tilt:

• Set position: node scripts/switchbot_cli.js cmd <deviceId> setPosition --param="up;60"
• Fully open: node scripts/switchbot_cli.js cmd <deviceId> fullyOpen
• Close: node scripts/switchbot_cli.js cmd <deviceId> closeUp / closeDown

Roller Shade:

• Set position: node scripts/switchbot_cli.js cmd <deviceId> setPosition --param=50

Humidifier (original):

• Set mode: node scripts/switchbot_cli.js cmd <deviceId> setMode --param=auto

Evaporative Humidifier / Auto-refill:

• Set mode: node scripts/switchbot_cli.js cmd <deviceId> setMode --param='{"mode":7,"targetHumidify":60}'
• Child lock: node scripts/switchbot_cli.js cmd <deviceId> setChildLock --param=true

Air Purifier (VOC/PM2.5/Table):

• Set mode: node scripts/switchbot_cli.js cmd <deviceId> setMode --param='{"mode":2,"fanGear":2}'
• Child lock: node scripts/switchbot_cli.js cmd <deviceId> setChildLock --param=1

Smart Radiator Thermostat:

• Set mode: node scripts/switchbot_cli.js cmd <deviceId> setMode --param=1
• Set temp: node scripts/switchbot_cli.js cmd <deviceId> setManualModeTemperature --param=22

Relay Switch 1PM / 1 / 2PM:

• Toggle: node scripts/switchbot_cli.js cmd <deviceId> toggle
• Set mode: node scripts/switchbot_cli.js cmd <deviceId> setMode --param=0
• 2PM channel: node scripts/switchbot_cli.js cmd <deviceId> turnOn --param="1" (channel 1 or 2)

Garage Door Opener:

• Open/Close: node scripts/switchbot_cli.js cmd <deviceId> turnOn / turnOff

Video Doorbell:

• Motion detection: node scripts/switchbot_cli.js cmd <deviceId> enableMotionDetection / disableMotionDetection

Candle Warmer Lamp:

• Brightness: node scripts/switchbot_cli.js cmd <deviceId> setBrightness --param=50

AI Art Frame:

• Next/Previous: node scripts/switchbot_cli.js cmd <deviceId> next / previous

Keypad / Keypad Touch / Keypad Vision / Keypad Vision Pro:

• Create passcode: node scripts/switchbot_cli.js cmd <deviceId> createKey --param='{"name":"Guest","type":"permanent","password":"12345678"}'
• Delete passcode: node scripts/switchbot_cli.js cmd <deviceId> deleteKey --param='{"id":"11"}'
• ⚠️ Keypad commands are async — results come via webhook.

IR Remote - Air Conditioner:

• Set all: node scripts/switchbot_cli.js cmd <deviceId> setAll --param="26,2,1,on" (format: temperature, mode, fan speed, power state)
  • mode: 0/1=auto, 2=cool, 3=dry, 4=fan, 5=heat
  • fan: 1=auto, 2=low, 3=medium, 4=high
  • power: on/off

IR Remote - TV:

• Channel: node scripts/switchbot_cli.js cmd <deviceId> SetChannel --param=5
• Volume: node scripts/switchbot_cli.js cmd <deviceId> volumeAdd / volumeSub

IR Remote - Others (DIY):

• Custom button: node scripts/switchbot_cli.js cmd <deviceId> <buttonName> --commandType=customize

Scenes (fallback):

• List scenes: node scripts/switchbot_cli.js scenes
• Execute scene: node scripts/switchbot_cli.js scene <sceneId>

API Reference

Base URL: https://api.switch-bot.com Path prefix: /v1.1 Daily limit: 10,000 API calls

Headers (all required):

• Authorization: <SWITCHBOT_TOKEN>
• sign: HMAC-SHA256(token + t + nonce, secret), Base64-encoded
• t: 13-digit millisecond timestamp
• nonce: random UUID

Key endpoints:

• GET /v1.1/devices — list all devices
• GET /v1.1/devices/{deviceId}/status — device status
• POST /v1.1/devices/{deviceId}/commands — send command
• GET /v1.1/scenes — list scenes
• POST /v1.1/scenes/{sceneId}/execute — execute scene

Command body format:

{
  "command": "<commandName>",
  "parameter": "<string|object>",
  "commandType": "command"
}

For IR "Others" (DIY) devices, use "commandType": "customize".

Agent Guidelines

• Always use the provided CLI scripts — they handle HMAC signatures automatically.
• The CLI runs preflight checks for BLE devices (Bot, Lock, Curtain, Blind Tilt) — requires Hub + Cloud Services enabled.
• For IR Air Conditioner, only setAll is supported (not separate setMode/setTemp).
• For Keypad commands (createKey/deleteKey), results are async via webhook.
• If a command returns statusCode 160, the device may not support that command — use Scenes as fallback.
• Never log tokens/secrets. Ask user to set them as environment variables.

Files

• scripts/switchbot_cli.js — Node CLI (list/status/cmd/scenes)
• scripts/list_devices.sh — curl: list devices
• scripts/get_status.sh — curl: get status
• scripts/send_command.sh — curl: send command
• scripts/list_scenes.sh — curl: list scenes
• scripts/execute_scene.sh — curl: execute scene
• references/commands.md — complete command reference per device type
• references/examples.md — usage examples