Telnyx Network

Telnyx Network

Private mesh networking and public IP exposure via Telnyx WireGuard infrastructure.

Requirements

• Telnyx API Key — Get one free
• WireGuard installed on your machine

Agent Use (OpenClaw)

WireGuard requires elevated permissions to create network interfaces. For OpenClaw to manage your mesh autonomously, run this once:

sudo ./setup-sudoers.sh

This adds a sudoers rule allowing WireGuard commands without password prompts. After setup, your agent can:

# Agent can now do all of this without password prompts:
./setup.sh --region ashburn-va
./join.sh --name "my-node" --apply
./register.sh --name "my-node"
./teardown.sh

What it does:

• Adds /etc/sudoers.d/wireguard-<username>
• Only allows wg and wg-quick commands (not blanket sudo)
• Can be removed anytime: sudo rm /etc/sudoers.d/wireguard-*

Without this setup, the agent can still create networks and generate configs, but you'll need to manually run sudo wg-quick up <config> to connect.

Two Modes

Mesh Mode (Private)

Connect multiple machines in a private network. Like Tailscale, but on Telnyx infrastructure.

./setup.sh --region ashburn-va
./join.sh --name "laptop"
./join.sh --name "server"  # run on server
# Now laptop and server can talk via 172.27.0.x

Cost: $10/month (WireGuard Gateway)

Expose Mode (Public)

Get a public IP and expose services to the internet.

./setup.sh --region ashburn-va
./join.sh --name "server" --apply
./add-public-ip.sh
./expose.sh 443
# Now https://64.16.x.x:443 reaches your server

Cost: $60/month (WireGuard Gateway + Internet Gateway)

Commands

Node Discovery

Nodes on the mesh can find each other using a registry stored in Telnyx Storage. This enables OpenClaw instances to automatically discover and communicate with each other.

Register This Node

After joining the mesh, register your node so others can find it:

./register.sh --name "home-server"

Discover Other Nodes

Find all registered nodes on the mesh:

./discover.sh

# Output:
# NAME            IP              HOSTNAME             REGISTERED
# home-server     172.27.0.1      macbook.local        2026-01-31 ✅
# work-laptop     172.27.0.2      thinkpad             2026-01-31 ✅

# JSON output for scripts
./discover.sh --json

Unregister

Remove a node from the registry:

./unregister.sh --name "old-server"

Use Case: Multi-OpenClaw Communication

# On OpenClaw A
./join.sh --name "openclaw-a" --apply
./register.sh --name "openclaw-a"

# On OpenClaw B
./join.sh --name "openclaw-b" --apply
./register.sh --name "openclaw-b"

# Either can now discover the other
./discover.sh
# → Shows both openclaw-a and openclaw-b with their mesh IPs

# Direct communication works via mesh IPs
curl http://172.27.0.2:18789/health  # OpenClaw B's gateway

This completes the "host-to-local node sessions" and "direct comms between OpenClaws" use cases.

Regions

Get full list:

./setup.sh --region help

Safety

Blocked Ports (need --force)

• 22 (SSH)
• 23 (Telnet)
• 3306 (MySQL)
• 5432 (PostgreSQL)
• 6379 (Redis)
• 27017 (MongoDB)

Firewall

Only explicitly exposed ports accept traffic on the WireGuard interface. All other ports are blocked by default.

Configuration

All state is stored in config.json:

{
  "network_id": "...",
  "region": "ashburn-va",
  "wireguard_gateway": {
    "id": "...",
    "endpoint": "64.16.x.x:5107",
    "subnet": "172.27.0.1/24"
  },
  "internet_gateway": {
    "id": "...",
    "public_ip": "64.16.x.x"
  },
  "peers": [...],
  "exposed_ports": [443, 80]
}

Use Cases

1. Connect OpenClaw Instances

# On main server
./setup.sh --region ashburn-va
./join.sh --name "openclaw-main" --apply

# On secondary server
./join.sh --name "openclaw-backup" --apply

# Now they can communicate securely

2. Expose Webhook Endpoint

./add-public-ip.sh
./expose.sh 443
# Configure your webhook URL as https://64.16.x.x/webhook

3. Multi-Region Mesh

./setup.sh --region ashburn-va
./join.sh --name "us-east-server"

# Same network, different region gateway
./setup.sh --region frankfurt-de --name same-network
./join.sh --name "eu-server"

Pricing

Troubleshooting

"Gateway still provisioning"

Wait 5-10 minutes after setup for the gateway to be ready.

"Connection refused"

• Check WireGuard is running: sudo wg show
• Check port is exposed: ./status.sh
• Check firewall: sudo iptables -L -n

"Permission denied"

WireGuard requires root. Run with sudo or use --apply flag.

License

MIT