Pfc5 Dynamics Wave

PFC5 Dynamics And Stress Waves

Use this skill for inertial wheel loading, vibration, impact, waveform sources, wave-speed checks, or sensor arrival-time studies in a PFC5 asphalt model.

Required Inputs

• PFC2D/PFC3D 5.0 and dynamic capability;
• loading/source type, direction, amplitude, frequency and duration;
• particle spacing/diameter and expected wave speed;
• damping, timestep, boundaries and sensor coordinates;
• required histories and acceptance tolerances.

Workflow

1. Solve and save the static preparation state.
2. Check direction against model dimension.
3. Check wavelength-to-spacing and timestep/samples-per-period with scripts/check_dynamic_resolution.py.
4. Declare damping changes and reset the loading-time origin. If energy output is required, enable PFC5 mechanical energy tracking before the measured interval; energy accumulation is off by default.
5. Test the source and one sensor before the full domain.
6. Compare free/rigid/absorbing boundary response as required.
7. Export input, time, timestep, energy, velocity/displacement and sensor signals.
8. Run resolution, timestep, damping and boundary sensitivity.

Read dynamic-contract.md for acceptance checks.

Working Rules

• Do not use preparation damping or calm operations during a physical response without justification.
• calm zeroes unfixed linear and angular velocities; using it inside the measured response changes the physics rather than merely improving convergence.
• Do not use density scaling for wave-speed validation.
• A moving-wheel surrogate is accepted only after comparison with the intended kinematics.
• Cross-correlation/localization is offline analysis; sensor geometry degeneracy must be reported.

Output Contract

Return source/loading definition, resolution report, timestep/damping/boundary assumptions, sensor layout, histories, sensitivity results and runtime status.

Local Contents

• references/dynamic-contract.md — dynamic and wave acceptance gates.
• scripts/check_dynamic_resolution.py — wavelength/direction/timestep checker.
• agents/openai.yaml — interface metadata.