Kodiak Strategy

🐻 KODIAK v2.0 — SOL Alpha Hunter

One asset. Every signal. Scanner enters. DSL exits.

⛔ CRITICAL AGENT RULES

RULE 1: Install path is /data/workspace/skills/kodiak-strategy/

RULE 2: THE SCANNER DOES NOT EXIT POSITIONS

When the scanner sees an active SOL position, it outputs NO_REPLY. DSL is the ONLY exit mechanism. v1.1.1 had a thesis exit that chopped positions before DSL could trail them. v2.0 removes it entirely.

RULE 3: MAX 1 POSITION — SOL only

RULE 4: Scanner output is AUTHORITATIVE

RULE 5: Verify runtime is installed on every session start

Run openclaw senpi runtime list. Runtime must be listed. The position tracker and DSL exit are handled by the plugin runtime.

RULE 6: Never modify parameters. Never increase leverage above 7x.

RULE 7: 120-minute cooldown after consecutive losses

What Changed From v1.1.1

v1.1.1 Proof of Concept

Kodiak's best trade: SOL SHORT, entry $90.36, DSL trailed to Tier 4 (+44% ROE), exit at $85.86, realized +$134 profit. The scanner found the setup. DSL managed the exit perfectly — locked 85% of peak, gave back only $3 from top.

The problem: DSL was manually patched onto this trade 13 hours after entry because the state file was missing wallet fields. v2.0 fixes this permanently.

The Three-Mode Lifecycle

MODE 1 — HUNTING (default)

Scan SOL every 3 minutes. All signals must align (4h trend, 1h momentum, SM, funding, OI, volume). Score 10+ to enter. When a position opens, switch to MODE 2.

MODE 2 — RIDING

Active position. DSL manages the exit via the plugin runtime. Scanner outputs NO_REPLY. The scanner does NOT re-evaluate the thesis. It does NOT close positions. The plugin DSL trails the position through Phase 1 protection and Phase 2 trailing tiers. When DSL closes the position → switch to MODE 3.

MODE 3 — STALKING

DSL locked profits. Watch for a reload opportunity. ALL reload conditions must pass: fresh momentum impulse, OI stable, volume present, funding not crowded, SM still aligned, 4h trend intact.

If reload fires → re-enter same direction, switch to MODE 2. If kill conditions trigger → reset to MODE 1.

Cron Setup

Scanner (3 min, main):

python3 /data/workspace/skills/kodiak-strategy/scripts/kodiak-scanner.py

How KODIAK Trades

Entry (score >= 10 required)

Every 3 minutes, the scanner evaluates SOL across all signal sources:

Maximum score: ~18. Minimum to enter: 10.

Conviction-Scaled Leverage

Conviction-Scaled Margin

Exit Management

DSL exit is handled by the plugin runtime via runtime.yaml. The position_tracker scanner auto-detects position opens/closes on-chain. See runtime.yaml for configuration details.

Monitor positions:

• openclaw senpi dsl positions — list all DSL-tracked positions
• openclaw senpi dsl inspect <ASSET> — full position details

Why SOL-Only at 7x Leverage

Risk

Runtime Setup

Step 1: Set your strategy wallet address in runtime.yaml:

sed -i 's/${WALLET_ADDRESS}/<STRATEGY_WALLET_ADDRESS>/' /data/workspace/skills/kodiak-strategy/runtime.yaml

Replace <STRATEGY_WALLET_ADDRESS> with the actual wallet address.

Step 2: Set telegram chat ID for notifications:

sed -i 's/${TELEGRAM_CHAT_ID}/<CHAT_ID>/' /data/workspace/skills/kodiak-strategy/runtime.yaml

Replace <CHAT_ID> with the actual Telegram chat ID.

Step 3: Install the runtime:

openclaw senpi runtime create --path /data/workspace/skills/kodiak-strategy/runtime.yaml

Step 4: Verify:

openclaw senpi runtime list

Bootstrap Gate

On EVERY session start, check config/bootstrap-complete.json. If missing:

1. Read the senpi-trading-runtime skill: cat /data/workspace/skills/senpi-trading-runtime/SKILL.md — this provides all CLI commands for runtime management and DSL position inspection.
2. Verify Senpi MCP
3. Set wallet in runtime.yaml: sed -i 's/${WALLET_ADDRESS}/ACTUAL_ADDRESS/' /data/workspace/skills/kodiak-strategy/runtime.yaml
4. Set Telegram in runtime.yaml: sed -i 's/${TELEGRAM_CHAT_ID}/CHAT_ID/' /data/workspace/skills/kodiak-strategy/runtime.yaml
5. Install runtime: openclaw senpi runtime create --path /data/workspace/skills/kodiak-strategy/runtime.yaml
6. Verify runtime installed: openclaw senpi runtime list
7. Remove old DSL cron (if upgrading): run openclaw crons list, delete any cron containing dsl-v5.py via openclaw crons delete <id>
8. Create scanner cron (3 min, isolated)
9. Write config/bootstrap-complete.json
10. Send: "KODIAK is online. Watching SOL. DSL managed by plugin runtime. Silence = no conviction."

If bootstrap exists, still verify runtime and scanner cron on every session start.

Notification Policy

ONLY alert: Position OPENED (direction, leverage, score, reasons), position CLOSED (DSL exit with P&L), risk guardian triggered, critical error. NEVER alert: Scanner found no thesis, thesis re-eval passed, any reasoning.

Expected Behavior

Files

License

MIT — Built by Senpi (https://senpi.ai). Source: https://github.com/Senpi-ai/senpi-skills