Neqsim Equipment Cost Estimation

NeqSim Equipment Cost Estimation Skill

Class-3/4 (AACE 18R-97) order-of-magnitude to study estimates for individual process equipment and early process/facility CAPEX rollups - the bridge between sized equipment and a project economics model. Wraps Turton (5e), Peters–Timmerhaus, Ulrich, and Seider correlations with CEPCI escalation, material factors, pressure factors, and Lang/Hand factors. The preferred NeqSim path is mechanical-design driven: call each unit's initMechanicalDesign(), calcDesign(), then getMechanicalDesign().getCostEstimate().calculateCostEstimate() or let ProcessCostEstimate.calculateAllCosts() do that rollup for a full flowsheet.

When to Use

• Quickly cost a sized vessel, column, HX, pump, compressor, filter, reactor, mixer, splitter, or manifold
• Build a bare-module → total-module → grass-roots stackup
• Apply CEPCI to escalate published correlations to current year
• Compare alternatives (e.g. centrifugal vs reciprocating compressor)
• Produce a scope-safe CostEstimateResult for equipment, process, topsides, SURF, subsea, well, or field-development estimates
• Reconcile located process totals against located equipment rows while retaining base equipment costs
• Feed equipment cost into NPV / IRR via neqsim-field-economics

For project-level economics, asset valuation, or fiscal regimes, use neqsim-field-economics. This skill is the CAPEX basis skill that feeds those economics workflows.

AACE Cost Estimate Classes

Pattern 1 — Bare-module Cost for a Vessel

import neqsim.process.costestimation.CostEstimationCalculator;

CostEstimationCalculator cost = new CostEstimationCalculator();
cost.setCurrentCepci(CostEstimationCalculator.CEPCI_2025);   // 840
cost.setMaterialOfConstruction("SS316");                     // sets Fm = 2.1
cost.setLocationByRegion("Norway");                          // location factor

double shellWeight_kg = 8500.0;        // from mechanical design
double designP_barg   = 110.0;
double Cp = cost.calcVerticalVesselCost(shellWeight_kg);
double Cbm = cost.calcBareModuleCost(Cp, designP_barg);      // applies Fp & Fm
double Ctm = cost.calcTotalModuleCost(Cbm);                  // + contingency + fees
double Cgr = cost.calcGrassRootsCost(Ctm);                   // + auxiliary facilities

Pattern 2 — End-to-end via calculateCostEstimate

cost.calculateCostEstimate(
    Cp,                  // purchased equipment cost
    designP_barg,        // for Fp
    shellWeight_kg,      // for installation man-hours
    "vertical_vessel"    // equipment category
);
String json = cost.toJson();   // structured output for results.json

Pattern 3 — Volume-Based Vessel Cost

For screening work, use the volume-based methods when the mechanical design knows vessel diameter and length but the shell weight is not yet reliable. These are now the preferred basis for separator, absorber, column, filter, and reactor vessel screening.

double vesselVolume_m3 = Math.PI * diameter_m * diameter_m / 4.0 * tanTanLength_m;
double verticalCp = cost.calcVerticalVesselCostByVolume(vesselVolume_m3);
double horizontalCp = cost.calcHorizontalVesselCostByVolume(vesselVolume_m3);

Keep the legacy calcVerticalVesselCost(weight_kg) and calcHorizontalVesselCost(weight_kg) methods for cases where the mechanical design has already produced a defensible shell weight.

Pattern 4 — CEPCI Escalation

C_today = C_published × CEPCI_today / CEPCI_published

Built-in indices: CEPCI_2019 (607.5) through CEPCI_2025 (840). Escalate any literature correlation that's published with a base year.

Pattern 5 — Equipment-Specific Methods

Pattern 6 — Mechanical-Design Estimator Wiring

Equipment-specific mechanical designs own their estimator selection. This is what makes full-process rollups work: ProcessCostEstimate does not need to know every unit's detailed sizing correlation; it asks the unit for its mechanical design and cost estimate.

unit.initMechanicalDesign();
MechanicalDesign design = unit.getMechanicalDesign();
design.calcDesign();
design.getCostEstimate().calculateCostEstimate();
double grassRootsCostUSD = design.getCostEstimate().getGrassRootsCost();

Current topside coverage includes specialized mechanical-design/cost paths for separators, scrubbers, columns, absorbers, adsorbers, mercury removal, pumps, compressors, expanders, ejectors, heat exchangers, BAHX units, tanks, pipelines, valves, mixers, splitters, filters, reactors, and manifolds. Header-like units such as mixers and splitters should calculate dry weight during calcDesign(); filter/reactor/manifold estimators reuse the mechanical design outputs instead of duplicating sizing logic.

Pattern 7 — Material and Pressure Factors (Turton)

double Fp = CostEstimationCalculator.getPressureFactor(designP_barg);  // ~1.0–3.0
// Fm constants: FM_CARBON_STEEL=1.0, FM_SS304=1.8, FM_SS316=2.1,
//               FM_SS316L=2.3, FM_MONEL=3.2, FM_HASTELLOY_C=3.8, FM_TITANIUM=4.5

Pattern 8 — Stackup Convention

Cp        = purchased equipment, FOB factory          (input)
Cbm       = Cp × (B1 + B2 × Fm × Fp)                  bare module
Ctm       = Cbm × 1.18                                + contingency 15% + fees 3%
Cgr       = Ctm × 1.30                                + 30% auxiliary (utilities, storage, OSBL)

Pattern 9 — Cost Estimate for a Whole Process

ProcessCostEstimate processCost = new ProcessCostEstimate(process);
processCost.calculateAllCosts();
double totalCgr = processCost.getTotalGrassRootsCost();

Use this rollup for reservoir-to-market screening once the flowsheet contains unit operations for the major equipment. It initializes each unit's mechanical design, runs calcDesign(), calls the attached estimator, and aggregates the result by equipment category.

Pattern 10 — Result Schema and Reconciliation

Use CostEstimateResult when handing estimates to reports, agents, or downstream economics. The map names encode whether rows are additive, summary totals, or non-cost quantities:

Examples of intended placement:

• Unit estimators: purchasedEquipmentCost in capitalCosts_USD; bareModuleCost, totalModuleCost, and grassRootsCost in capitalCostSummary_USD; installationManHours in quantityBasis.
• ProcessCostEstimate: process PEC/BMC/TMC/grass-roots in capitalCostSummary_USD; totalProjectCost in projectCostSummary_USD; totalInstallationManHours in quantityBasis.
• Topsides facilities: direct field cost and excluded non-topsides scope in capitalCostSummary_USD; totalTopsidesCapex in projectCostSummary_USD; module detail in capitalCostBreakdown_USD.
• SURF/development: totalSURF and totalDevelopment in capitalCostSummary_USD; vessel days in quantityBasis.

ProcessCostEstimate.toJson() reports equipment rows with location-adjusted costs in the standard *_USD fields, because those rows must reconcile with the process totals and costByEquipmentType_USD. Base, unlocated rows remain under basePurchasedEquipmentCost_USD, baseBareModuleCost_USD, baseTotalModuleCost_USD, and baseGrassRootsCost_USD, with locationFactor shown explicitly.

Common Mistakes

Validation Checklist

• CEPCI year matches the project base year
• Material of construction set per stream service (e.g. SS316L for wet sour)
• Pressure factor applied for design P > 10 barg
• AACE class declared in report (5/4/3) with stated accuracy band
• Stackup shown: Cp → Cbm → Ctm → Cgr with each multiplier
• Currency and location factor stated
• Additive cost rows, summary totals, supplementary breakdowns, and non-cost quantities are kept in separate CostEstimateResult maps
• Process equipment rows reconcile on the same basis as totals: located-to-located or base-to-base
• JSON saved via cost.toJson() to results.json under capex section
• Sensitivity to ±20% on key drivers (compressor power, column trays) reported
• Full-process screens include major reservoir-to-market equipment rather than only topside separators and compressors
• New equipment classes expose a specialized mechanical design and estimator before relying on ProcessCostEstimate

Related Skills

• neqsim-field-economics — project NPV / IRR / fiscal
• neqsim-api-patterns — CompressorDesignFeasibilityReport includes integrated cost
• neqsim-standards-lookup — AACE 18R-97