Erigon Test All

Erigon Full Test Suite

Runs the complete test suite with 60-minute timeout and coverage output. Takes ~30 minutes.

Prerequisite: Test fixtures

make test-all no longer downloads any fixture tarballs. Execution spec tests moved out of go test ./... and into the dedicated eest-spec-* Makefile targets driven by the EEST spec tests workflow (test-eest-spec.yml); the consensus spec test (cl/spectest) is skipped here via ERIGON_SKIP_CL_SPECTEST=true (set automatically by the Makefile) and runs only in test-integration-caplin.yml.

To exercise the EEST suites locally, see erigon-eest-spec (or run a specific shard directly):

make eest-spec-statetests-stable-{sequential,parallel}
                                             # state tests vs eest_stable fixtures
make eest-spec-blocktests-stable-sequential  # blockchain tests vs eest_stable fixtures (serial commitment)
make eest-spec-blocktests-stable-parallel    # same, but with parallel commitment
make eest-spec-enginextests-stable-sequential # engine-x tests vs eest_stable (serial commitment)
make eest-spec-enginextests-stable-parallel  # same, but with parallel commitment
make eest-spec-enginextests-devnet-{sequential,parallel}
                                             # devnet engine-x tests in both commitment modes
make eest-spec-statetests-devnet-{sequential,parallel}
                                             # state tests vs eest_devnet fixtures
make eest-spec-transactiontests-{stable,devnet}-race
                                             # transaction tests with evm.race
make eest-spec-blocktests-devnet-{sequential,parallel}
                                             # devnet blocktests in both commitment modes
make eest-spec-statetests-legacy-{sequential,parallel}
                                             # pinned legacy Cancun state-test archive
make eest-spec-rlptests-legacy-race          # complete pinned legacy RLP suite
make eest-spec-transactiontests-legacy-race  # complete pinned legacy transaction suite
make eest-spec-difficultytests-legacy-race   # complete pinned legacy difficulty suite
make eest-spec-blocktests-legacy-consensus-sequential
                                             # Hive consensus fixture selection;
                                             # -parallel and
                                             # -race-{sequential,parallel} variants too
make eest-spec-blocktests-legacy-constantinople-sequential
                                             # Hive legacy fixture selection;
                                             # -parallel plus three race partitions:
                                             # ...-race-constantinople,
                                             # ...-race-constantinople-fix, and
                                             # ...-race-other-forks; each race
                                             # partition has sequential/parallel variants
make eest-spec-blocktests-legacy-cancun-sequential
                                             # Hive legacy-cancun selection;
                                             # -parallel plus six race partitions:
                                             # ...-race-{berlin,shanghai,cancun,
                                             # london,paris,other-forks}; each race
                                             # partition has sequential/parallel variants
make eest-spec-enginextests-benchmark-1m-sequential
                                             # engine-x benchmark fixtures @ 1M gas target
                                             # (with per-test --time stats);
                                             # -5m/-10m/-30m/-60m/-100m/-150m variants too,
                                             # each with a "-sequential" / "-parallel" pair
make eest-spec-blocktests-stable-race-cancun-sequential
                                             # race-detector variant, sharded per fork:
                                             # -pre-cancun/-cancun/-prague/-osaka, plus
                                             # eest-spec-blocktests-devnet-race-amsterdam-
                                             # {sequential,parallel}. Each stable-race
                                             # and devnet-race sub-shard has a
                                             # "-sequential" / "-parallel" pair
                                             # (e.g. ...-race-cancun-{sequential,parallel})

The shard list / failure budgets / commitment-parallel flags live in tools/eest-spec-shards.yml (single source of truth for both this workflow and tools/run-eest-spec-test.sh). See EEST_SPEC_SHARDS / EEST_SPEC_RACE_SHARDS in the root Makefile for the partition into race vs non-race targets.

Pitfall: stale evm / evm.race binary. Always invoke shards via make eest-spec-<shard> — the Makefile lists evm (or evm.race) as a prereq and go build is cache-aware, so a stale binary gets rebuilt automatically. Calling bash tools/run-eest-spec-test.sh <shard> directly bypasses the rebuild and silently exercises whatever build/bin/evm{,.race} happens to be on disk against current fixtures, inflating failures or hiding regressions. After pulling code, switching branches, or any time you suspect the binary is older than HEAD: rm -f build/bin/evm build/bin/evm.race && make evm evm.race before re-running.

Prerequisite: Create RAM Disk

Before running make test-all, create a RAM disk and export its path as ERIGON_EXECUTION_TESTS_TMPDIR:

path=$(bash tools/create-ramdisk)

Then prepend ERIGON_EXECUTION_TESTS_TMPDIR=$path to the test command (see below). The execution/tests suite does heavy temp-file I/O; backing that with tmpfs avoids disk bottlenecks and matches how CI runs the same workflow (ramdisk: true in test-all-erigon.yml, which invokes the same tools/create-ramdisk script via setup-erigon).

The script is cross-platform (Linux tmpfs, macOS hdiutil, Windows ImDisk). Linux requires sudo to mount tmpfs at /mnt/erigon-ramdisk. Override size with RAMDISK_SIZE_MB (default 2048).

Command

ERIGON_EXECUTION_TESTS_TMPDIR=$path GOGC=80 make test-all

Equivalent to the "All tests" GitHub Actions workflow (test-all-erigon.yml).

When Tests Fail — Drill Down

When make test-all fails, identify and re-run just the failing package/test:

# Re-run just the failing package
go test --timeout 60m ./execution/stagedsync/...

# Re-run a specific test by name
go test --timeout 60m -run TestStagedSyncFoo ./execution/stagedsync/...

# Run with verbose output to see what's happening
go test --timeout 60m -v -run TestName ./path/to/package/...

# Run with GOGC to match CI memory pressure
GOGC=80 go test --timeout 60m ./path/to/package/...

Find Which Package Failed

The output shows the failing package path. Look for lines like:

FAIL    github.com/erigontech/erigon/execution/stagedsync [build failed]
--- FAIL: TestName (12.34s)

Extract the import path after github.com/erigontech/erigon/ and convert to a local path:

github.com/erigontech/erigon/execution/stagedsync → ./execution/stagedsync/

Common Skips

Tests skipped via -short in test-short run fully here. If a test passes in test-short but fails here, it likely tests a slow path (large dataset, timeout, DB heavy).

When to Use

• Before marking a PR ready for review
• After significant logic changes to verify no edge cases break
• Full gate: path=$(bash tools/create-ramdisk) && make lint && make erigon integration && ERIGON_EXECUTION_TESTS_TMPDIR=$path GOGC=80 make test-all

CI Equivalent

To dispatch remotely:

gh workflow run "All tests" --ref <branch>
gh workflow run "EEST spec tests" --ref <branch>
gh workflow run "Consensus spec" --ref <branch>