Rtk Output Filtering

rtk (Rust Token Killer)

When to use

• Before running any CLI command expected to produce >30 lines of output
• When setting up rtk on a new machine or project
• When creating/optimizing project-local rtk filters

What

High-performance CLI proxy that reduces LLM token consumption on common dev commands through intelligent output filtering (whitespace, boilerplate, comments, duplicate log messages). Single Rust binary, <10ms startup overhead. Third-party Apache-2.0 tool (rtk-ai upstream — an external project, not part of this package).

Savings — STALE, and scoped. Do not quote the number without this label. Upstream reports 60-90% (their estimate — "actual savings vary"). agent-config's own figure is 33% overall, 0-57% per command, and it is a single spot-measurement from 2026-07-28: one repo, one macOS machine, an 8-command corpus. It has not been superseded by a wider run, and the widened re-bench is deferred — road-to-terminal-token-economy steps 3.2-3.4. The reason changed on 2026-08-23 and the label is updated with it: the original deferral was ordering (Phase 2 had not chosen the wrapper mechanism, so a re-bench would measure the wrong subject). Phase 2 has now chosen — the existing warn-only nudge — so that objection is discharged. What defers it now is the re-bench's own registered design, which requires at least two machines, and only one is reachable. A one-machine re-bench would reproduce exactly the narrowness the widening exists to fix. AI council 2026-08-23, 2/2 convergent, on both readings.

Treat it as an order of magnitude for that corpus, never as this package's general claim. Verbose commands (git status, git log, ls -la) save ~55%; already-compact output (--oneline, --stat) passes through at ~0%, which is why an overall percentage is meaningless without the corpus that produced it. See internal/bench/rtk-savings/RESULTS.md.

Docs: https://www.mintlify.com/rtk-ai/rtk Repo: https://github.com/rtk-ai/rtk

Usage

Wrap any CLI command with rtk:

rtk git status        # verbose status → compact (measured ~55% here)
rtk git log           # compact log output (measured ~55% here)
rtk cargo test        # upstream: only failures shown
rtk npm test          # same for JS/TS
rtk docker compose ps # compact container status

Procedure: Analyze, then wrap commands with rtk

1. Analyze the current setup

• Read personal.rtk_installed from .agent-settings.yml.
• Review the command about to run: estimated output size, whether completeness matters (e.g. diff review), and whether a project-local filter exists in .rtk/filters.toml.

2. Wrap (or skip)

1. If personal.rtk_installed: true → prefix commands with rtk when output >30 lines expected.
2. If false or missing → use plain commands. Do not prompt the user.
3. After wrapping: verify output is useful (not truncated on completeness-critical commands).

Installation and one-time setup are owned by /onboard. If the user asks to install rtk outside onboarding, follow the Installation section below and set personal.rtk_installed: true on success.

Output format

1. Wrapped command with rtk prefix
2. Token savings estimate (if first use in conversation)

Installation (on-demand)

Invoked when rtk is not on PATH and the user explicitly asks to install it. Never fire unsolicited.

1. Offer the verified per-OS install path (same map as src/install/rtkDetection.ts / docs/contracts/rtk-detection.md):
   • macOS → brew install rtk (official homebrew-core formula)
   • Linux → curl -fsSL https://raw.githubusercontent.com/rtk-ai/rtk/master/install.sh | sh (installs to ~/.local/bin)
   • Windows → winget install rtk-ai.rtk (plus the documented ripgrep dependency: winget install BurntSushi.ripgrep.MSVC); winget-less images use the upstream rtk-x86_64-pc-windows-msvc.zip release. NEVER cargo install rtk — the bare crates.io rtk crate is the unrelated Rust Type Kit, not Rust Token Killer.
2. Run the installer only on explicit confirmation. On success:
   1. rtk gain to verify IDENTITY (the savings dashboard prints "RTK Token Savings" only on Rust Token Killer — rtk --version cannot distinguish the two same-name tools).
   2. rtk init --global to enable auto-rewrite hooks.
   3. Apply Post-Install Setup below (telemetry, tee, audit logging).
   4. Generate project-local filters (see Post-Install Setup).
   5. Write personal.rtk_installed: true to .agent-settings.yml.

Post-Install Setup (mandatory)

After installation, always apply these steps before any rtk usage:

1. Disable telemetry

rtk ships with telemetry enabled by default (opt-out). Sends anonymous usage data daily.

# Add BOTH — env var (immediate) + config (persistent)
echo 'export RTK_TELEMETRY_DISABLED=1' >> ~/.zshrc

mkdir -p ~/.config/rtk
# In ~/.config/rtk/config.toml:
# [telemetry]
# enabled = false

2. Enable tee recovery (safety net)

Saves raw unfiltered output on command failures. Auto-cleans (max 20 files, oldest deleted). Prevents re-running commands just to see full output.

# In ~/.config/rtk/config.toml:
[tee]
enabled = true
mode = "failures"
max_files = 20
max_file_size = 1048576

3. Enable hook audit logging

Logs all hook-rewritten commands so you can trace what rtk intercepted.

echo 'export RTK_HOOK_AUDIT=1' >> ~/.zshrc

Reference config (~/.config/rtk/config.toml)

[telemetry]
enabled = false

[tracking]
enabled = true
history_days = 30

[tee]
enabled = true
mode = "failures"
max_files = 20
max_file_size = 1048576

[display]
colors = true
emoji = true
max_width = 120

When to use rtk

Never use rtk for

When debugging or reviewing diffs, always run the raw command without rtk.

Project-Local Filters

Project-local custom filters live in .rtk/filters.toml (project root, versioned in Git). These override global filters for matching commands. Add entries for whatever tools the project actually runs.

Coverage shipped with this package (extend per project):

• PHP / Laravel: PHPStan, Pest, PHPUnit, ECS, Rector, Composer, Artisan
• JS / TS: tsc, eslint, prettier, vitest, jest, playwright, pnpm/npm/yarn install + run
• Python: ruff, mypy, pyright, pytest, pip / poetry / uv
• Go: go test, go build, go vet, golangci-lint
• Rust: cargo build, cargo test, cargo clippy, cargo fmt
• Infra / runtime: Docker Compose, Terraform, kubectl

To generate or update project-local filters → use the /optimize-rtk-filters command.

Gotcha

• rtk git diff silently truncates at ~50 changes — you'll make decisions on incomplete data
• rtk read has the same truncation risk — always use cat/view instead
• Telemetry is enabled by default — always disable it during installation
• The tee recovery (mode = "failures") is your safety net — without it, re-run is the only option

Do NOT

• Do NOT use rtk for git diff or any command where completeness matters
• Do NOT skip the post-install setup (telemetry, tee, audit logging)
• Do NOT use rtk for commands already piped through grep/tail
• Do NOT use rtk for short commands (< 5 lines expected output)