Stalwart Dokploy Resend Relay

Stalwart on Dokploy (Resend Relay Default)

Use this skill to deploy a production-ready Stalwart server on a new VPS managed by Dokploy.

Default assumption:

• outbound SMTP port 25 is blocked by provider/network
• outbound mail must go through smtp.resend.com:587

Scope

This skill covers:

• preflight validation (MX, Dokploy, Stalwart)
• Stalwart deployment on Dokploy
• domain + DNS records for mailbox hosting
• TLS certificate setup for mail/web endpoints
• mailbox and admin provisioning
• relay route to Resend SMTP
• verification for IMAP/SMTP and queue behavior

Triggers

• "set up stalwart on new vps"
• "install mail server on dokploy"
• "stalwart with resend relay"
• "smtp 25 blocked setup"
• "host support@ mailbox on vps"

Required Inputs

• Domain: e.g. example.com
• Mail host: e.g. mail.example.com
• VPS SSH access
• Dokploy access
• Resend API key

Mandatory Preflight (Run First)

Before any configuration changes, run all checks below.

1. DNS/MX check

dig +short MX <domain>
dig +short A mail.<domain>

Pass criteria:

• MX includes mail.<domain> with valid priority
• mail.<domain> resolves to VPS public IP

If fail:

• stop and prompt user to fix DNS first
• optionally offer to provide exact records to add

2. Dokploy existence check

On VPS:

docker ps --format '{{.Names}} {{.Image}}' | grep -i dokploy

Pass criteria:

• Dokploy services are running

If fail:

• prompt user: install Dokploy now?
• if user approves auto-install, install and verify Dokploy before continuing

3. Stalwart existence check

On VPS:

docker ps --format '{{.Names}} {{.Image}}' | grep -i stalwart

Pass criteria:

• existing Stalwart service/container found

If fail:

• prompt user: install Stalwart automatically via Dokploy now?
• if approved, deploy Stalwart and continue

Decision Flow (Required)

Use this exact branching logic:

1. If MX is incorrect:

• do not proceed with mailbox validation
• provide DNS fix instructions
• wait for user confirmation and re-check

2. If Dokploy missing:

• ask user whether to install automatically
• if yes, install Dokploy and verify
• if no, stop with clear manual prerequisites

3. If Stalwart missing:

• ask user whether to install automatically in Dokploy
• if yes, deploy Stalwart and verify
• if no, stop with required manual steps

Only continue to next phases when all three preflight checks pass.

DNS Baseline

Add/verify these records:

1. Mail host A:

• mail A -> <VPS_PUBLIC_IP>

2. Inbound MX:

• @ MX priority 10 -> mail.<domain>

3. SPF for domain:

• @ TXT -> v=spf1 mx include:amazonses.com -all

4. DMARC starter:

• _dmarc TXT -> v=DMARC1; p=none;

Notes:

• Keep existing Resend send-domain records (send.<domain> MX/SPF/DKIM) if used.
• Root-domain MX for mailbox hosting and send.<domain> MX for sending workflows can coexist.

Deploy Stalwart in Dokploy

• Use Stalwart image (stalwartlabs/stalwart:latest-alpine)
• Expose/route ports: 25, 465, 587, 993, 8080, 443
• Persist volumes for /etc/stalwart, /var/lib/stalwart, /opt/stalwart-mail

If bootstrap keeps resetting after restart, fix volume ownership:

sudo chown -R 2000:2000 /var/lib/docker/volumes/<stalwart-volume>/_data

Stalwart Bootstrap

• Complete bootstrap once (default domain, hostname, internal directory)
• Confirm admin account is persistent after restart

Target settings:

• default hostname: mail.<domain>
• default domain: <domain>

TLS Certificate (must not be self-signed)

Use Let’s Encrypt for mail.<domain>:

sudo certbot certonly --standalone -d mail.<domain> --non-interactive --agree-tos -m support@<domain>

Then import the cert into Stalwart certificate store and set as defaultCertificateId.

If the UI create form rejects the PEM with No certificates found in PEM, create the certificate through the JMAP x:Certificate/set endpoint instead, using the leaf certificate PEM and private key, then set x:SystemSettings.defaultCertificateId to the created certificate object ID and restart Stalwart so 465/993 pick up the new cert.

Verify:

openssl s_client -connect mail.<domain>:465 -servername mail.<domain> < /dev/null 2>/dev/null | openssl x509 -noout -subject -issuer -dates
openssl s_client -connect mail.<domain>:993 -servername mail.<domain> < /dev/null 2>/dev/null | openssl x509 -noout -subject -issuer -dates

Expected:

• CN includes mail.<domain>
• issuer is Let’s Encrypt (not self-signed)

Create Mailboxes

Create at least:

• admin mailbox (e.g. admin@<domain>)
• support mailbox (e.g. support@<domain>)

Verify auth from server side:

# IMAP auth test
openssl s_client -quiet -crlf -connect 127.0.0.1:<mapped-993> <<<'a1 LOGIN support@<domain> <password>'

# SMTP auth test
# AUTH PLAIN with base64(\0user\0pass)

Critical Default: Outbound Relay via Resend

When port 25 egress is blocked, do not use direct MX delivery route for outbound.

Configure in Stalwart:

1. Create route relay (@type: Relay):

• address: smtp.resend.com
• port: 587
• implicitTls: false
• authUsername: resend
• authSecret: <RESEND_API_KEY>

2. Update x:MtaOutboundStrategy route expression:

• keep local delivery rule for local domains
• set default route else to 'relay'

Resulting behavior:

• local recipient domains -> local route
• external recipients -> Resend relay route

Web Admin Routing (Dokploy)

Map host to Stalwart web service (container port 8080):

• Host: mail.<domain>
• Path: /
• Internal Path: /
• HTTPS: enabled
• Redeploy after domain change

Admin UI URL:

• https://mail.<domain>/admin/

Verification Checklist

1. DNS:

dig +short MX <domain>
dig +short A mail.<domain>

2. Ports:

nc -zv mail.<domain> 993
nc -zv mail.<domain> 465
nc -zv mail.<domain> 25

3. IMAP/SMTP login works for support@<domain>.

4. Queue health:

• x:QueuedMessage/get should not accumulate permanent TemporaryFailure entries.
• If messages stay Scheduled too long, inspect route/worker status and restart service.

5. End-to-end test:

• send external test mail from Thunderbird and verify delivery
• send inbound test to support@<domain> and verify receipt

Thunderbird Client Settings

Use manual settings (autodiscovery may fail):

• IMAP: mail.<domain> / 993 / SSL/TLS / Normal password
• SMTP: mail.<domain> / 465 / SSL/TLS / Normal password
• username: full email address

If direct outbound delivery remains blocked and Stalwart queue is not healthy, temporary fallback:

• SMTP server in client: smtp.resend.com
• port: 465 (SSL/TLS) or 587 (STARTTLS)
• username: resend
• password: Resend API key

Common Failure Modes

1. Bootstrap not persisting

• Cause: wrong volume permissions
• Fix: chown volumes to stalwart user (2000:2000)

2. TLS cert mismatch/self-signed

• Cause: default cert still active
• Fix: import LE cert and set default certificate in x:SystemSettings
• If the UI errors with No certificates found in PEM, use JMAP x:Certificate/set with the leaf PEM + private key, then restart Stalwart

3. External send fails, queue error Network unreachable (os error 101)

• Cause: blocked outbound 25
• Fix: force outbound route to Resend relay

4. Inbound mail not arriving

• Cause: MX or port 25 path wrong/firewall
• Fix: validate DNS MX + open/route tcp 25 end-to-end

Exit Criteria

Complete when:

• preflight checks all pass (MX, Dokploy, Stalwart)
• https://mail.<domain>/admin/ opens
• valid LE cert is presented on 465/993/443
• support@<domain> can authenticate over IMAP/SMTP
• inbound mail to support@<domain> is received
• outbound to external recipients is delivered via relay without queue stall