How do I install the Send skill?

Run npx skillmds@latest add fibrous-finance/send in your terminal (requires Node.js), paste this page's agent-chat prompt into Claude, Cursor, or any MCP-connected agent, or download the SKILL.md file and copy it into your agent's skills directory.

This skill has not completed SkillMD's automated safety review yet. SkillMD never runs a skill's scripts for you; review the SKILL.md before installing.

Which AI agents work with Send?

This skill is tagged as working with Claude Code, Claude.ai, OpenAI Codex. SKILL.md is an open format, so most agents that read a skills directory can load it too.

Yes. Installing skills from SkillMD is free. This skill is licensed under MIT.

Fibrous-Finance (@fibrous-finance) published this skill. Their other Agent Skills are listed on their SkillMD profile.

Send by fibrous-finance — Agent Skill

Name: Send
Author: Fibrous-Finance

File contents

Send Transaction

Transfer native tokens or ERC-20 tokens to a destination address. The CLI preflights the transfer before broadcasting it; if that check fails, no transfer is sent.

Prerequisites

Active session required.
Sufficient balance for the transfer amount + gas fees.

Rules

BEFORE any send, you MUST run npx fibx@latest status and npx fibx@latest balance to verify connectivity and funds.
If the recipient address was NOT previously mentioned in the conversation, you MUST ask for explicit confirmation: "Sending [amount] [token] to [address]. Confirm?"
If the user specifies a chain, you MUST include --chain <name>. If not specified, default to base and state it.
Use the correct native token symbol for each chain. NEVER use ETH on non-Base chains.
AFTER a successful send, you MUST verify the transaction using tx-status with the same --chain flag.

Chain Reference

Chain	Flag	Native Token
Base	`--chain base`	ETH
HyperEVM	`--chain hyperevm`	HYPE
Monad	`--chain monad`	MON

Commands

npx fibx@latest send <amount> <recipient> [token] [--chain <chain>] [--simulate] [--json]

If token is omitted, the chain's native token is used.

Parameters

Parameter	Type	Description	Required
`amount`	number	Amount to send (e.g. `0.1`, `100`)	Yes
`recipient`	string	Destination address (`0x...`)	Yes
`token`	string	Token symbol (e.g. `USDC`, `ETH`, `MON`)	No
`chain`	string	`base`, `hyperevm`, or `monad`	No
`simulate`	flag	Preview without broadcasting	No
`json`	flag	Output as JSON	No

Default token: chain native. Default chain: base.

Native-token previews include estimated gas. ERC-20 previews validate the contract call but do not currently return a gas estimate.

Examples

User: "Send 10 USDC to 0x123...abc"

npx fibx@latest status
npx fibx@latest balance
# Confirm recipient with user
npx fibx@latest send 10 0x123...abc USDC
npx fibx@latest tx-status <hash>

User: "Send 0.05 MON to 0xdef...456 on Monad"

npx fibx@latest status
npx fibx@latest balance --chain monad
npx fibx@latest send 0.05 0xdef...456 MON --chain monad
npx fibx@latest tx-status <hash> --chain monad

Error Handling

Error	Action
`Insufficient funds`	Inform user of current balance via `balance`.
`Simulation failed`	Transaction would revert — check amount and gas.
`Invalid address`	Validate recipient is a valid `0x` address.
`Not authenticated`	Run `authenticate-wallet` skill first.
`Rate limit / 429`	Use `config` skill to set a custom RPC.

Related Skills

Run balance BEFORE sending to verify sufficient funds.
Run portfolio to see your full holdings with USD values across all chains.
Run tx-status AFTER sending to confirm the transaction succeeded.
Use config to set a custom RPC if you encounter rate limit errors.

---name: senddescription: Send native tokens (ETH, HYPE, MON) or ERC-20 tokens to an address on Base, HyperEVM, or Monad. Preflights writes and supports a no-broadcast --simulate preview.license: MIT---# Send TransactionTransfer native tokens or ERC-20 tokens to a destination address. The CLIpreflights the transfer before broadcasting it; if that check fails, no transferis sent.## Prerequisites- Active session required.- Sufficient balance for the transfer amount + gas fees.## Rules1. BEFORE any send, you MUST run `npx fibx@latest status` and `npx fibx@latest balance` to verify connectivity and funds.2. If the recipient address was NOT previously mentioned in the conversation, you MUST ask for explicit confirmation: _"Sending [amount] [token] to [address]. Confirm?"_3. If the user specifies a chain, you MUST include `--chain <name>`. If not specified, default to `base` and state it.4. Use the correct native token symbol for each chain. NEVER use `ETH` on non-Base chains.5. AFTER a successful send, you MUST verify the transaction using `tx-status` with the same `--chain` flag.## Chain Reference| Chain | Flag | Native Token || -------- | ------------------ | ------------ || Base | `--chain base` | ETH || HyperEVM | `--chain hyperevm` | HYPE || Monad | `--chain monad` | MON |## Commands```bashnpx fibx@latest send <amount> <recipient> [token] [--chain <chain>] [--simulate] [--json]```If `token` is omitted, the chain's native token is used.## Parameters| Parameter | Type | Description | Required || ----------- | ------ | ---------------------------------------- | -------- || `amount` | number | Amount to send (e.g. `0.1`, `100`) | Yes || `recipient` | string | Destination address (`0x...`) | Yes || `token` | string | Token symbol (e.g. `USDC`, `ETH`, `MON`) | No || `chain` | string | `base`, `hyperevm`, or `monad` | No || `simulate` | flag | Preview without broadcasting | No || `json` | flag | Output as JSON | No |Default token: chain native. Default chain: `base`.Native-token previews include estimated gas. ERC-20 previews validate thecontract call but do not currently return a gas estimate.## Examples**User:** "Send 10 USDC to 0x123...abc"```bashnpx fibx@latest statusnpx fibx@latest balance# Confirm recipient with usernpx fibx@latest send 10 0x123...abc USDCnpx fibx@latest tx-status <hash>```**User:** "Send 0.05 MON to 0xdef...456 on Monad"```bashnpx fibx@latest statusnpx fibx@latest balance --chain monadnpx fibx@latest send 0.05 0xdef...456 MON --chain monadnpx fibx@latest tx-status <hash> --chain monad```## Error Handling| Error | Action || -------------------- | ------------------------------------------------ || `Insufficient funds` | Inform user of current balance via `balance`. || `Simulation failed` | Transaction would revert — check amount and gas. || `Invalid address` | Validate recipient is a valid `0x` address. || `Not authenticated` | Run `authenticate-wallet` skill first. || `Rate limit / 429` | Use `config` skill to set a custom RPC. |## Related Skills- Run `balance` BEFORE sending to verify sufficient funds.- Run `portfolio` to see your full holdings with USD values across all chains.- Run `tx-status` AFTER sending to confirm the transaction succeeded.- Use `config` to set a custom RPC if you encounter rate limit errors.

Frequently asked questions

Send