Win Back Reactivation

Win-Back Reactivation

Overview

Lapsed customers — those who have not purchased within 2× their typical repurchase cycle — represent a high-ROI recovery opportunity because they already know your brand. Win-back campaigns targeting these customers typically yield 5–15% reactivation rates, compared to 1–3% for cold prospecting. For Shopify, Klaviyo's predictive churn risk segment automates lapsed customer identification without manual RFM scoring. For WooCommerce, AutomateWoo provides a dedicated "Win Back" automation trigger. The strategic work is structuring a three-step email sequence, personalizing offers by customer LTV, and sunsetting contacts who remain unresponsive.

When to Use This Skill

Note: For proactive churn prevention before customers lapse, see @customer-retention-engine. This skill focuses on re-engaging customers who have already become inactive.

• When a large portion of your customer base has not purchased in 90–180 days
• When overall repeat purchase rate is declining year-over-year
• When you have never systematically targeted lapsed customers before
• When lifecycle marketing is in place but there is no specific win-back workflow
• When wanting to identify which lapsed customers are worth discounting vs. sunsetting

Core Instructions

Step 1: Choose your win-back automation tool

Recommendation: If you already use Klaviyo for cart abandonment or post-purchase flows, add win-back there — no additional tool needed. If you are on WooCommerce without Klaviyo, AutomateWoo is the most cost-effective option.

Step 2: Set up lapsed customer segments

Shopify / BigCommerce with Klaviyo

Klaviyo includes a Predictive Churn Risk property on every customer profile, calculated automatically from purchase history. No manual RFM setup required.

1. In Klaviyo, go to Lists & Segments → Create Segment

2. Create three segments using Properties about someone:

   Early Lapsed (60–120 days):

   • Predictive Churn Risk equals High
   • AND Date of last order is between 120 days ago and 60 days ago
   • AND Email marketing consent is subscribed

   Mid-Lapsed (121–180 days):

   • Predictive Churn Risk equals High
   • AND Date of last order is between 180 days ago and 121 days ago

   Deep-Lapsed (181–365 days):

   • Predictive Churn Risk equals High
   • AND Date of last order is between 365 days ago and 181 days ago

3. Alternatively, use Klaviyo's pre-built Winback flow template: go to Flows → Create Flow → Browse Templates → search "Win Back" → the template creates segments and email sequence automatically

WooCommerce with AutomateWoo

1. Go to WordPress Admin → AutomateWoo → Workflows → Add Workflow
2. Set the trigger to Win Back Inactive Customer
3. Configure trigger settings:
   • Days since last order: set to 60 for early-lapsed, create a second workflow at 120 for deeper lapsed
   • Order status: completed
4. Add a Send Email action for each step in the sequence
5. AutomateWoo automatically excludes customers who have placed an order since the workflow started — no manual cancellation needed

Manual segmentation (any platform)

If you do not use an automation tool, export your customer list filtered by last order date:

• Shopify: go to Customers → All customers → use the date filter "Last order date is before [date]" → export as CSV → import into your email platform
• WooCommerce: go to WooCommerce → Reports → Customers → filter by last active date
• BigCommerce: go to Customers → Export and filter by last order date in your spreadsheet

Step 3: Build the win-back email sequence

A three-email sequence performs better than a single message. The sequence escalates from warm reconnection to an explicit offer to a last-chance message:

Subject line examples that work:

• Email 1: "It's been a while, [first name]" / "We've been thinking about you"
• Email 2: "Still thinking about [last purchased category]?" / "A little something for your return"
• Email 3: "Your offer expires tomorrow" / "This is our last email — we mean it"

Klaviyo sequence setup:

1. Go to Flows → Create Flow → Start from Scratch
2. Set the trigger to Segment → [your lapsed segment]
3. Add Email → Time Delay (5 days) → Email → Time Delay (7 days) → Email
4. Add a Conditional Split after Email 1: if the customer has placed an order since the flow started, exit them from the flow
5. For the discount: go to Content → Coupon Codes → create a unique dynamic coupon for each recipient (Klaviyo generates unique single-use codes automatically)

Step 4: Personalize offers by customer LTV

Not all lapsed customers deserve the same discount. Tailor the offer based on historical spend:

In Klaviyo:

• Use the Historic Customer Lifetime Value property in your email template
• Create two versions of Email 2 using A/B test or conditional content blocks:
  • High LTV (over $300 lifetime): free shipping + 15% off
  • Standard LTV (under $300): 10% off

In AutomateWoo:

• Add a Check Customer Total Spent condition to your workflow
• If total spent > 300: proceed to the high-value email variation
• Otherwise: proceed to the standard email variation

Step 5: Cancel win-back sequence on purchase

This step prevents sending a discount email to a customer who already bought.

In Klaviyo: Klaviyo handles this automatically — any profile that exits the lapsed segment (by making a purchase) immediately exits all active flows for that segment.

In AutomateWoo: the "Win Back Inactive Customer" trigger natively cancels pending workflow steps when an order is placed — no additional configuration needed.

Manual check (custom setups): Before sending each email in your sequence, verify the customer's last order date is still beyond your lapse threshold. Cancel the remaining sequence if they have purchased.

Step 6: Sunset unresponsive contacts

Continuing to email completely unresponsive lapsed contacts hurts your sending domain's deliverability.

In Klaviyo:

1. Go to Lists & Segments → Create Segment:
   • Email marketing consent is subscribed
   • AND Last opened email more than 90 days ago
   • AND Last clicked email more than 90 days ago
   • AND Date of last order more than 180 days ago
2. Send a single Re-permission email: "We'll stop sending you emails unless you click to stay subscribed"
3. Anyone who does not click within 14 days: go to the segment → Manage Members → Suppress All — this removes them from all future sends without deleting them
4. Suppression is reversible — they can re-subscribe at any time

In AutomateWoo:

• Add a final step to your win-back workflow: after 30 days of no engagement, add the customer to an "unsubscribe" list or use the Unsubscribe Customer action

Best Practices

• Lead with connection, not desperation — the first message should feel warm ("We've missed you") rather than transactional; aggressive discounts on message 1 train customers to wait for the win-back offer
• Personalize with previous purchase context — referencing what the customer previously bought increases open rates by 25–35% vs. generic "we miss you" subject lines; Klaviyo's {{ event.extra.product_name }} pulls last purchased product name automatically
• Respect the email sunset — suppressing non-engagers after 90 days of inactivity protects your domain reputation and improves deliverability for everyone else
• Vary offer levels by LTV — a 15% discount that wins back a $500 LTV customer is excellent ROI; the same discount on a $40 LTV customer barely covers the cost
• Set a 60-day cooldown — after a completed win-back cycle (converted or suppressed), do not re-enter the customer into another win-back flow for at least 60 days
• Use SMS for mid-lapsed only — SMS has high engagement but also high unsubscribe rates when used for lapsed contacts; reserve SMS for the mid-lapsed tier (121–180 days) where the customer relationship is still warm

Common Pitfalls

Related Skills

• @customer-retention-engine
• @lifecycle-marketing-automation
• @email-marketing-automation
• @email-list-segmentation
• @loyalty-program-optimization