Copy Connections Validate

Copy Connections — Validate

This skill takes a copy plan and checks it for issues before execution. It produces .copy-connections/validation_report.yaml. Execute refuses to run without a passing report.

Validate can also run standalone — a user who wants to know "would this copy work?" without committing to execute can run just this skill against an existing plan.

Required checkpoints

1. Load the plan and verify it's current. If .copy-connections/copy_plan.yaml doesn't exist, tell the user to run scope first. If it exists but references entities (destinations, connections, groups) that no longer match the current Fivetran state, flag it and suggest re-scoping.
2. Every check is read-only. Validate does not write to Fivetran. If a check would require a write to verify (e.g., dry-running a connection creation), note it as an info-level item rather than attempting the write.
3. Classify every finding by severity (blocking, warning, info). Severity drives behavior: blocking fails the plan; warnings require acknowledgment; info is informational.
4. Write a structured report, not just prose. The report is machine-readable (execute reads it) and human-readable (user reads it). Use the schema in schemas/validation_report.schema.yaml.
5. Summarize clearly at the end. Blocking issues → explain what needs to change and direct the user to re-scope. Warnings → list them with codes so the user can acknowledge. Info-only pass → say so plainly.

Step-by-step

1. Load the plan

Read .copy-connections/copy_plan.yaml. If missing, stop and tell the user: "No copy plan found. Run scope first to create one."

Compute a checksum of the plan (simple hash is fine) and record it in the validation report metadata. Execute will verify the plan hasn't been modified between validate and execute — if it has, validate must re-run.

2. Verify plan freshness against current state

Before running checks, do a quick sanity pass:

• Call list_groups and list_destinations — do the source and target (if existing) referenced in the plan still exist?
• Call list_connections for the source group — are the source connections still there with the same IDs?

If anything has changed (destination deleted, connection moved, new connection added that wasn't in the plan), flag as blocking with code PLAN_STALE. The user needs to re-scope.

This is the only outward-facing state check at the top level. Per-connection deep checks happen in step 3.

3. Run destination-level checks

For the destination portion of the plan:

Naming collision (blocking, code DESTINATION_NAMING_COLLISION). If the plan says "create new group with name X" and a group with name X already exists, that's blocking. Exception: if the existing group's destination is the exact one the plan intends to create (same config), degrade to warning with DESTINATION_ALREADY_EXISTS — user might have partially run execute before, which is fine under the idempotency model.

Type support (blocking, code DESTINATION_TYPE_UNSUPPORTED). If the plan specifies a destination type Fivetran doesn't support, blocking. (Unlikely given we just created it in scope, but check anyway for standalone validate runs.)

Portability caveats (info, code DESTINATION_FIELD_NOT_PORTED). If the plan says "copied portable config from X" and there are non-portable fields in the source destination that obviously didn't carry over (warehouse size, networking specifics, role assignments), list them as info so the user knows what they'll want to review post-copy.

Same source and target (warning, code DESTINATION_SAME_AS_SOURCE). If the plan's source and target destinations are the same destination, warn. Technically valid (copy-and-rename within a destination) but almost always a mistake.

4. Run per-connection checks

For each connection in the plan, run the following checks. Accumulate findings into the report.

Naming collision (blocking, code CONNECTION_NAMING_COLLISION). If a connection with the target name already exists in the target group, that's blocking. Exception: idempotency — if the existing connection's config exactly matches the plan, degrade to warning with code CONNECTION_ALREADY_EXISTS (user resuming after partial execute).

Service support (blocking, code CONNECTION_SERVICE_UNSUPPORTED). If the source connector service isn't available to the target account, blocking. Unusual — services usually are account-wide — but possible for services that require specific entitlements.

Schema config replicability (per-table and per-column). For each table in the source schema config:

• If enabled_patch_settings.allowed: false with reason SYSTEM_TABLE, the enabled flag can't be patched. This is fine — system tables exist in the target too, and will be either on or off by default. info, code SYSTEM_TABLE_NOT_PATCHABLE.
• If enabled_patch_settings.allowed: false with reason DELETED, the table was deleted at source. The target won't have this table (unless it was also deleted there, unlikely for a fresh copy). warning, code SOURCE_TABLE_DELETED — the plan's enabled: false for this table is harmless, but surface so the user knows.
• If enabled_patch_settings.allowed: false with reason OTHER, surface the reason text. warning, code TABLE_UNPATCHABLE_OTHER.

For each column:

• SYSTEM_COLUMN → info, code SYSTEM_COLUMN_NOT_PATCHABLE.
• DELETED → warning, code SOURCE_COLUMN_DELETED.
• OTHER → warning, code COLUMN_UNPATCHABLE_OTHER.

Columns with hashing enabled (hashed: true) should always be patchable — if they're not, that's a harder warning because the privacy intent won't carry over. warning, code HASHED_COLUMN_UNPATCHABLE.

Source connection state (info or warning). If the source connection is in an error state:

• auth_token_expired, auth_failure, or similar → warning, code SOURCE_AUTH_BROKEN. The user likely knows but surface again. Copy replicates config, not auth.
• setup_state: incomplete → warning, code SOURCE_SETUP_INCOMPLETE. Config may be partial.
• Healthy → no finding.

Credential fields consistency (blocking, code CREDENTIAL_FIELDS_CHANGED). Re-fetch get_connection_details for the source connection. If the set of masked fields differs from what the plan recorded, the user has modified the source in the Fivetran UI between scope and validate. Blocking — re-scope.

Custom transformations at connection level (info, code CUSTOM_TRANSFORMATION_NOT_COPYABLE). If the source connection has a transformation configured via the Transformations product (not a Quickstart package, not column config), that won't carry through this plugin. List the transformation name and flag for manual recreation. This is info not warning because we've told the user during scoping; this is just a reminder.

5. Run per-transformation checks

For each Quickstart package in the plan:

Package compatibility with target destination (blocking, code PACKAGE_INCOMPATIBLE_WITH_DESTINATION). Call the Quickstart package metadata endpoint. Check the target destination type is in the package's supported list. If not, blocking.

Dependency presence (blocking, code PACKAGE_MISSING_DEPENDENCY). Quickstart packages depend on a connection being present. If the dependency connection isn't in the plan (user excluded it), blocking — either add the dependency connection or remove the package.

Version/latest check (info, code PACKAGE_VERSION_OUTDATED). If the source uses an older version of the package and a newer version is available, note it. User can upgrade post-copy.

6. Compute overall status

• Any blocking findings → status is fail. Execute will refuse to run.
• No blocking, any warnings → status is pass-with-warnings. Execute will run but require the user to acknowledge warnings.
• No blocking, no warnings → status is pass. Execute runs without further ceremony.

Info-only findings do not affect status.

7. Write the report

Write .copy-connections/validation_report.yaml conforming to schemas/validation_report.schema.yaml. Include:

• Metadata (timestamp, plan checksum, plan path)
• Overall status
• Summary counts
• Destination findings, connection findings (keyed by source_id), transformation findings
• Acknowledgments required list (copies of every warning code for easy execute-side lookup)

8. Summarize to the user

Give a clear verbal summary. Lead with the overall status.

If fail: state the status, list the blocking issues with codes and fix directions, tell the user to run scope again.

If pass-with-warnings: state the status, list the warnings by code with context, remind the user that execute will require acknowledgment. Don't try to auto-acknowledge here — that's execute's job.

If pass: state the status, optionally mention info-level findings as FYI, tell the user they can run execute.

Key product knowledge

enabled_patch_settings severity is about intent leakage. If the source had a column blocked or hashed (a privacy action) and the setting can't be patched on the target, the privacy intent doesn't carry over — worth a warning. If a system table has enabled: true/false at source that doesn't carry over, the system table's own default is almost certainly fine — info-level at most.

Idempotency is validated, not prevented. Users who re-run after a partial execute will hit *_ALREADY_EXISTS findings. Don't make this blocking by default — the user intended to continue. Degrade to warning, require acknowledgment.

Plan staleness vs. field drift. PLAN_STALE at the top level (destination deleted, connection removed) is blocking — the plan refers to things that no longer exist. CREDENTIAL_FIELDS_CHANGED at the per-connection level is blocking for a related reason — the source was modified between scope and validate, and the plan might be missing credential fields. Both require re-scoping. Don't try to "just update the plan" from validate — that's not validate's job and it would mask an audit gap.

Custom transformations need to be surfaced multiple times. Once in scope, once in validate, once in the results file post-execute. Users forget between scoping and execution. Redundancy is fine here.

Validation is not a setup test. We do not call run_connection_setup_tests or run_destination_setup_tests during validate — those are writes-adjacent (they hit the source/target system). Setup tests run in the copy-connections-schema skill after credentials are attached. Validate reads Fivetran's state; it does not poke source or target systems.

When validate fails

If status is fail, the most common causes:

• User modified the source in Fivetran UI between scope and validate → re-scope
• Source connection or destination was deleted → re-scope (possibly after restoring or adjusting the plan)
• Target destination already has a conflicting group/connection name → re-scope with different names
• A Quickstart package isn't compatible with the target destination → re-scope to remove the package

In all cases, the fix is re-scoping. Validate doesn't try to patch the plan; it just reports.

Standalone use

A user can invoke validate without having just run scope:

"I've got a copy plan from last week — what would break if I ran it today?"

In that case:

1. Confirm .copy-connections/copy_plan.yaml exists
2. Run all checks as normal
3. Report — the freshness check in step 2 will catch most drift since the plan was written

This is the main reason validate is its own skill instead of folded into execute: it has real standalone value for dry-run-style workflows.

Anti-patterns to avoid

• Don't write to Fivetran from validate. Read-only, always. No setup tests, no connection creation, no patches.
• Don't try to auto-fix the plan. If checks fail, report and send the user back to scope. Automated plan patching would mask issues that should be surfaced.
• Don't treat info findings as warnings. Info is FYI only — no acknowledgment required. Don't inflate severity.
• Don't skip the plan checksum. Execute uses it to detect plan modification after validation.
• Don't overwrite a passing report with a failing one silently. If the user runs validate twice and the second run fails, make that obvious — they may have changed something they didn't mean to.

Example output

For a pass-with-warnings result:

Validation: PASS WITH WARNINGS (2 warnings, 3 info)

Destination: ✓ snowflake_test ready

Connections:
  ✓ postgres_app (no issues)
  ✓ stripe_prod (1 info: SOURCE_TABLE_DELETED on charges_legacy — harmless, table is gone at source)
  ⚠ salesforce_prod (1 warning: HASHED_COLUMN_UNPATCHABLE on contacts.ssn — the hashing setting may not carry over to the new connection; verify post-copy)
  ⚠ hubspot_marketing (1 warning: SOURCE_AUTH_BROKEN — source is in auth_token_expired state; you confirmed during scoping that you want to debug in the new env)

Transformations:
  ✓ stripe_analytics Quickstart package — compatible with Snowflake

Execute will require acknowledgment of the 2 warnings. When ready, run execute.