Delegate

CRITICAL: pi CLI Integration

This skill delegates a task to the pi CLI tool (@earendil-works/pi-coding-agent) via the dedicated pi:pi-agent execution layer. Config is read endpoint-first (same format as /pi:review); legacy flat fields remain as a fallback.

CRITICAL: No Bypass — pi MUST Run

Execute every task through pi:pi-agent — never answer the task yourself. NEVER:

• judge a task "too simple", "not worth pi", "just a question", or "already satisfied" and answer it yourself;
• perform the task's edits yourself instead of delegating;
• stop after resolving settings without launching pi:pi-agent;
• fall back to running pi directly if pi:pi-agent fails to start or hangs — report the failure and stop.

Even a trivial-looking task still launches pi-agent — the delegation contract IS the point. Valid early exits are only: pi not installed (blocked below), and the settings-only flags --edit-config / --list-models (which stop by design). --doctor still runs pi, via pi:pi-agent.

Mechanical enforcement: disallowed-tools: ["Bash(pi:*)"] hard-removes direct pi invocations from this skill's turn, so running pi yourself is impossible — not just discouraged. If you ever catch yourself reaching for pi outside pi:pi-agent, you have violated the contract: stop and launch pi:pi-agent instead.

Before Execution: Check Installation

# Check if pi is installed
command -v pi >/dev/null 2>&1

If not installed, tell the user:

pi is not installed. Install it globally:

  npm install -g @earendil-works/pi-coding-agent

Or via the standalone installer:

  curl -fsSL https://pi.dev/install.sh | sh

Then stop — do not proceed without pi installed.

Persistent Settings

User preferences persist across invocations via JSON files. The resolution chain (highest priority first):

1. CLI flag (from $ARGUMENTS)
2. .claude/pi.local.json — project-specific overrides, gitignored
3. .claude/pi.json — project shared defaults, committed
4. ~/.claude/pi.local.json — global user-wide defaults
5. pi's own defaults (pi decides its own default provider and model)

Provider/model/baseUrl/apiKey come from these files (or CLI flags). API keys reach pi via --api-key — nothing is written to models.json except baseUrl. pi itself reads the usual provider env vars (OPENAI_API_KEY, etc.) as its own last-resort defaults.

Settings file format

The settings file uses the same named-endpoint format as /pi:review — endpoint-first. Legacy flat fields (provider, model, baseUrl, apiKey) are still honored as a fallback when no defaultEndpoint is set, so existing configs keep working.

Values can reference environment variables using $VAR or ${VAR} syntax — they are resolved at read time.

{
  "endpoints": {
    "local-proxy": {
      "provider": "openai",
      "baseUrl": "http://10.10.0.195:8317/v1",
      "models": ["gemini-3.6-flash-high", "gemini-3.6-pro"]
    }
  },
  "defaultEndpoint": "local-proxy",
  "defaultModel": "gemini-3.6-flash-high"
}

Each endpoint key has provider (required), optional baseUrl, optional apiKey, and models (array). Only include fields you want to override — partial files merge per-field across the chain.

Note on precedence: endpoint-first resolution means that once a defaultEndpoint exists anywhere in the merged chain, the active endpoint wins and a project's legacy flat fields (provider/model/baseUrl) are ignored for that key. If you need a project to override the global endpoint, set that project's .claude/pi.local.json defaultEndpoint to its own endpoint — the flat fields are only consulted when no defaultEndpoint is set at all.

Reading settings

Read the settings files in priority order (lowest first, so each overrides the previous), resolving endpoint-first with flat-field fallback, CLI --endpoint/--model/--api-key overrides, and the model-ownership check. The full snippet lives in references/settings.md — run it before building the pi-agent prompt so $PROVIDER/$MODEL/$ENDPOINT/$API_KEY/$BASE_URL are resolved. It yields PROVIDER, MODEL, ENDPOINT, API_KEY, BASE_URL, THINKING, TOOLS, EXCLUDE_TOOLS, WITH_PACKAGES.

--edit-config flag

When $ARGUMENTS is exactly --edit-config (with optional scope flag), open the settings file for editing. Three scopes matching the three priority tiers:

Shared scope (--shared) is committed to git — never put a literal apiKey in it. The apiKey field there must be a $ENV_VAR reference (e.g. "$MY_API_KEY") so no secret is committed. Literal keys belong in the personal scopes (.claude/pi.local.json, ~/.claude/pi.local.json).

# Detect scope
if [[ "$ARGUMENTS" == *"--global"* || "$ARGUMENTS" == *"-g"* ]]; then
  CONFIG_PATH="$HOME/.claude/pi.local.json"
elif [[ "$ARGUMENTS" == *"--shared"* ]]; then
  CONFIG_PATH=".claude/pi.json"
else
  # --local (default)
  CONFIG_PATH=".claude/pi.local.json"
fi

# Create if not exists (seed matches the review skill's template)
mkdir -p "${CONFIG_PATH%/*}"
if [ ! -f "$CONFIG_PATH" ]; then
  cat > "$CONFIG_PATH" << 'EOF'
{
  "endpoints": {},
  "defaultEndpoint": "",
  "defaultModel": "",
  "thinking": ""
}
EOF
fi

# Open in editor
${EDITOR:-vi} "$CONFIG_PATH"

Report: "Settings file created/opened at <path>. Changes take effect on the next /pi:delegate invocation."

--list-models flag

When $ARGUMENTS is exactly --list-models, read the merged config and display all configured endpoints and their models:

# Endpoints present → list them; otherwise fall back to flat fields
if echo "$CONFIG" | jq -e '.endpoints | length > 0' >/dev/null 2>&1; then
  echo "$CONFIG" | jq -r '
    .defaultEndpoint as $def |
    .defaultModel as $defm |
    ((.endpoints // {}) | to_entries[] |
      "\(.key)" + if .key == $def then " (default)" else "" end +
      " → " + .value.provider +
      ":" +
      ((.value.models // []) | join(", ")) +
      if .key == $def and $defm != "" then "  ← active: " + $defm else "" end
    )
  '
else
  echo "$CONFIG" | jq -r '"flat: " + (.provider // "") + " / " + (.model // "") + " @ " + (.baseUrl // "(default)")'
fi

Then stop — do not proceed to delegate.

--doctor flag

When $ARGUMENTS is exactly --doctor, run a comprehensive configuration check. Delegate it to pi:pi-agent with MODE: doctor — the agent holds Bash(pi:*) (which delegate's allowed-tools deliberately does not, to enforce the delegation contract), so it can run the pi installation/connectivity probes in references/doctor.md. Pass the resolved $PROVIDER/$MODEL/$THINKING/$WITH_PACKAGES (and $ENDPOINT if a CLI --endpoint selected one) as inputs; do NOT pass $API_KEY/$BASE_URL — the pi-agent re-reads them from the settings files itself, so the key never enters the model's context and doctor inherits the agent's endpoint resolution. The agent runs the doctor script and returns the check results.

Argument Parsing

Parse $ARGUMENTS to extract the task description and optional flags. The task description is everything before the first -- flag. If no flags are present, the entire argument is the task description.

Resolution order per flag

For each flag, resolve the value by checking CLI flag first, then settings file, then pi's built-in default:

1. Parse $ARGUMENTS for that flag. If present, use it.
2. Otherwise, read from $CONFIG (the merged settings). If non-null/non-empty, use it.
3. Otherwise, use pi's built-in default.

Endpoint resolution

1. If --endpoint is specified, use it as the key into endpoints config.
2. If --model is specified without --endpoint, scan all endpoints for a model matching the ID — use the first match's endpoint.
3. Otherwise, use defaultEndpoint from settings.
4. Resolve the pi provider from the endpoint's provider field; the model from defaultModel then the endpoint's first models entry.
5. If no endpoint is configured, fall back to legacy flat fields (provider/model/baseUrl).

Delegating to pi-agent

Do NOT run pi directly. After parsing arguments and resolving settings, launch the dedicated pi:pi-agent execution layer with the Task tool. It builds the command, runs pi in the background, and verifies the outcome.

Pass these fields in the agent prompt:

MODE: delegate
TASK: <task description>
PROVIDER: <resolved or empty — leave pi's default>
MODEL: <resolved or empty — leave pi's default>
API_KEY: <CLI --api-key value only, or empty — a key the user typed explicitly overrides the config key; config-file keys stay in the agent's own read, never passed>
ENDPOINT: <resolved endpoint key or empty — lets the pi-agent read credentials from the right endpoint (non-secret)>
AGENT_DIR: <optional — pi agent dir; default ~/.pi/agent. Set to a worktree-local path (e.g. .pi-agent) in sandboxed/git-worktree sessions so pi state stays inside the project>
THINKING: <resolved, default max>
TOOLS: <resolved, default read,bash,write,edit,grep,find,ls>
EXCLUDE_TOOLS: <resolved from --exclude-tools or empty>
NO_GIT: <true if --no-git>
WITH_PACKAGES: <true if --with-packages or settings withPackages; empty/false = clean mode>
APPEND_PATHS: <(omit — the pi-agent adds CLAUDE.md itself, and collects git context per NO_GIT)>

Do NOT pass a config-file API_KEY or BASE_URL — the pi-agent reads them from the settings files itself (so config secrets never enter the model's context). The only key that may be passed is a CLI --api-key the user typed explicitly, which overrides the config key.

The pi-agent handles: agent-dir resolution, CLAUDE.md context, git context (unless --no-git), command construction, background execution (no timeout), and verification via git diff --stat.

Worktree / sandboxed sessions

In a git-worktree or sandboxed session, $HOME/.pi is outside the worktree and writes to it get rejected. Two mitigations, applied by the pi-agent:

• AGENT_DIR — pass a worktree-local directory (e.g. .pi-agent); pi keeps all its state there via PI_CODING_AGENT_DIR. Best for isolated sessions.
• Conditional write — once a BASE_URL already matches the agent-dir models.json, the pi-agent skips the write entirely, so an already-configured endpoint causes no out-of-worktree write.

--base-url note

pi does not support a --base-url CLI flag. Custom endpoints are configured through the agent-dir models.json, which the pi-agent writes when BASE_URL is non-empty — never pass --base-url to pi.

Handling Output

CRITICAL: pi's Real Output Is File Edits, Not stdout

pi writes code by editing files in the working directory. Its stdout is secondary — often empty or minimal, especially with long --append-system-prompt. Do not judge success by stdout content.

On Success (exit code 0)

The pi-agent reports the changed files. Present those changes to the user and describe what pi modified (additions, deletions, file count). If git shows no changes and exit was 0, the task was understood but resulted in no modifications — pi ran, but produced no file edits (e.g. read-only analysis or conceptual questions).

On Error (exit code 1+)

Show the error message from the pi-agent's report. Common error causes:

• pi not configured (no API key)
• Provider/model not available
• Task interrupted or killed

On Hang / No Response

If pi:pi-agent produces no result within a reasonable wait, or its status is unclear, report the stalled state and stop — never fall back to running pi directly. The delegation contract is enforced by disallowed-tools; a bypass attempt would not work anyway and would lose the config-resolution chain (provider/baseUrl/models.json), which is the usual cause of a 401.

Usage Examples

Basic task with file context

User: /pi:delegate review the TypeScript types in src/

Claude: Reads settings, resolves the endpoint, then launches pi:pi-agent with MODE: delegate and the task description. pi-agent builds the pi command, runs it in the background, and reports git diff --stat.

Specific model

User: /pi:delegate refactor this component --model claude-sonnet-4-20250514

Claude: Resolves --model from the flag (overriding settings), then passes MODEL: claude-sonnet-4-20250514 to pi-agent.

Custom base URL (OpenAI-compatible proxy)

User: /pi:delegate write unit tests for this module --endpoint local-proxy

Claude: Resolves the local-proxy endpoint from settings, extracts its baseUrl, and passes it to pi-agent, which writes it to the agent-dir models.json (default ~/.pi/agent/models.json) before running pi.

Read-only analysis

User: /pi:delegate audit the security of this codebase --tools read,grep,find,ls

Claude: Passes TOOLS: read,grep,find,ls to pi-agent so pi is restricted to read-only tools.

No git context, just conceptual

User: /pi:delegate explain how React reconciliation works --no-git

Claude: Passes NO_GIT: true along with the task description to pi-agent, so it skips collecting git status/log context.

Important Notes

• pi MUST be installed globally. The skill checks and blocks if not found.
• Never run pi directly — always delegate to pi:pi-agent. The agent is the plugin's single execution path and owns backgrounding, verification, and error handling.
• Settings are shared with /pi:review via the same file chain (.claude/pi.local.json, .claude/pi.json, ~/.claude/pi.local.json) and the same endpoint-first format.
• Default clean mode: the pi-agent adds --no-extensions --no-skills so interactive pi packages (and ~/.pi/agent/skills) do not load. Pass --with-packages or set "withPackages": true to opt in.
• --no-session prevents pi from creating session files; --no-context-files prevents pi from reading its own AGENTS.md/CLAUDE.md (which could conflict with the current project's context); --approve skips any project trust prompts. The pi-agent adds these.
• CLAUDE.md context is always passed by pi-agent via --append-system-prompt as file paths — ~/.claude/CLAUDE.md (user global) and ./CLAUDE.md (project).
• To configure pi (provider, model, base URL), run /pi:setup instead of passing flags manually.